Scotland

Bathroom Resealing in Angus

Covering 40 places across Angus for bathroom resealing, done properly, quoted clearly before any work starts and a one-year guarantee.

Bathroom Resealing across Angus

Email us

Get a quick quote

Bathroom resealing across Angus

Bath, shower, basin, wet room, worktop and sink resealing. Pick your town below to see the details for your area, and get in touch for a quick quote.

Main towns

What else we do in Angus

Postcode areas we cover

How bathroom resealing works in Angus

We fill the bath before sealing it. A full bath sits slightly lower than an empty one, so the bead isn’t stretched the first time someone gets in. It’s a small step that rushed reseals tend to skip. Typical jobs include gaps between the worktop and the wall and failed sealant on the screen profile, across baths, sinks & splashbacks and shower trays & enclosures.

Every visit runs the same way: we check the joints, protect the area around them, do the work and tidy away. It generally takes two to three hours for a typical bath, depending on how much old sealant there is.

First the area is protected and every bit of old sealant removed, including the film left on the tiles.
The joint is cleaned, degreased and treated for mould.
The joint is left to dry, and baths are filled with water first.
A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
We clear away and tell you when it can get wet, normally after around 24 hours.

Pricing in Angus

The cost reflects the work involved, not a rough estimate. That’s why we ask a few questions first.

Why book with us

Any old sealant cut out fully, not covered over
We leave the area clean and tidy
4.9 on Google from 180+ five-star reviews
More than 20 years in sealant work

Ask for a quote

For bathroom resealing in Angus, drop us a line at info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.

Near you in Arbroath

Around Arbroath, our work takes us to homes and buildings near Arbroath High School, Knox's Church and The Corn Exchange pub and the streets around them. There’s a railway station in Arbroath itself: Arbroath station. Nearby you will also find Arbroath Signal Tower Museum (0.6 miles south) and Arbroath Infirmary (0.6 miles south).

Where we work in Angus

Across Angus, from Arbroath, Forfar and Carnoustie outwards, we see bathrooms and kitchens of every age. Sealant and grout wear out in all of them, whether it’s a family bathroom, a rented flat or a hotel en suite.

Homes in Scotland come with their own details: harled walls, sash and case windows and, in the larger towns and cities, tenements. Angus is part of the area we cover across Scotland. In the coastal parts of Angus, the sea-facing side of a building takes the most weather, and that is where sealant normally gives up first. The right product and careful preparation help it last.

Arbroath: For an older house near a landmark such as Knox's Church, older homes can move a little, which is hard on rigid grout and tired sealant. For site and facilities teams at buildings such as Arbroath High School, we reseal washrooms and kitchens in schools and businesses as well as homes.

Surface by surface

Sinks & splashbacks

The edge of an inset sink is a common place for water to get under the worktop. Where the sealant around the visible edge has failed, we renew it.

Baths

Baths move more than any other fitting, so we fill it with water before sealing. That way the joint is laid with the bath at its heaviest and is not torn the first time it’s used.

Landlords, agents and businesses in Angus

Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.

A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.

What affects the quote in Angus

Some jobs are bigger than they look, and some smaller. What affects the quote:

The size of the job
Any mould that needs treating
How much old sealant there is and how hard it is to remove
Working hours on commercial sites

Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all play a part, and we will explain the quote if you ask.

What we need to know

There’s no need for technical detail. Just tell us:

Any previous sealing or DIY work
Whether it’s a home or a business
What the problem is, such as mould, gaps, leaks or cracking
Pictures of the joints, sent by email

We quote each job on its own, so start by telling us what you need. Simply send an email to info@mrmastic.co.uk and describe the job.

DIY versus a professional finish

What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.

If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.

How to look after the new joints

Once the sealant has cured, a few habits help it last:

Squeegee the walls and tray after use
Wait for the cure time we give you
Check the joints every few months for splits or lifting
Don’t leave water standing on kitchen joints

Good ventilation does more than any cleaner. Run the extractor fan during and after a shower, so the silicone gets a chance to dry.

Worktop joints fail quietly. Splashes run behind the back edge and soak into the worktop, and the board underneath can swell. A reseal in time can save the worktop.

Questions from Angus

Do you come to Angus?

Yes. We are based in Crawley and work across South East England, London and Scotland, Angus included.

How long before the new sealant can get wet?

After around 24 hours in most cases. You’ll get the exact cure time before we leave.

Is it OK to put new sealant on top of the old bead?

No. It’s a common reason for reseals failing. We cut out all of the old sealant, clean the joint and start again.

Can you get rid of the black mould in my sealant?

Yes. Once mould has grown into the silicone, it generally can’t be cleaned out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.

Should I try DIY first?

Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.

Do I have to be there?

For indoor joints, yes, someone needs to let us in. Once we have agreed the job, you don’t need to watch us work.

Are you insured?

Yes. Mr Mastic is fully insured, with over 20 years’ experience in sealant work.