Essex · England
Mastic man in CO6
We cover every part of the CO6 postcode district, including Coggeshall, Earls Colne and Great Horkesley. Every joint is properly prepared, with a one-year guarantee.
Where we work in CO6
- Coggeshall
- Earls Colne
- Great Horkesley
- West Bergholt
- Marks Tey
- Nayland
- Copford
- Leavenheath
- Colne Engaine
- Fordham
- Stoke-by-Nayland
- Great Tey
- White Colne
- Polstead Heath
- Rose Green
- Wakes Colne
- Wormingford
- Chappel
- Polstead
- Aldham
- Coggeshall Hamlet
- Fordstreet
- Little Horkesley
- Little Tey
- Mulberry Green
- Copford Green
- Gallows Green
- Mill Street
- Scotland Street
- Surrex
- Bell's Corner
- Broad Green
- Swan Street
- Thorington Street
- Wissington
- Withermarsh Green
- Cock Street
- Braintree
- Mile End
- Eight Ash Green
- Stanway
- Fordham Heath
- Skye Green
What we do in CO6
- Window & door mastic
- Gutter, fascia & soffit sealing
- Bathroom & kitchen resealing
- External & façade joints
- Glazing & conservatory sealant
- Fire-rated sealant
- Floor & skirting joints
- Remedial sealant & repairs
- Regrouting
- Commercial & hotel sealant
- New-build mastic & snagging
- Sand mastic for sash & case windows
- Every service
Let us know the job and your postcode for a quick quote: ring 0345 464 0079 or send us an email.
Our bathroom resealing service in CO6
Mr Mastic has more than 20 years’ experience of sealant work, and our applicators reseal bathrooms and kitchens across CO6. We’re fully insured ARBOMaster approved applicators, and every job carries our 12-month guarantee. We’re often asked to deal with shrunken sealant along the back of a worktop and leaks into the floor or ceiling below, on sinks & splashbacks, wet rooms and shower trays & enclosures.
There is not much for you to do on the day. Point us to the joints and we will get on with it. The work itself takes two to three hours for a typical bath, depending on how much old sealant there is, including the tidy-up.
- First, each joint is checked for movement and signs of water.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, normally around 24 hours.
Pricing in CO6
What it costs depends on the size of the job, how much old material has to come out and access to the work. You’ll have a clear quote before any work starts, so you know where you stand.
Why customers in CO6 choose us
- Rated 4.9 stars on Google
- A 12-month guarantee on all work
- Approved under the ARBOMaster scheme
- More than 20 years in sealant work
Getting a quote
To get a quote, phone 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. We will give you a clear price before any work starts.
Local landmarks in Coggeshall
Typical jobs here are in homes near The Woolpack Inn, Honywood Community Science School and St Peter ad Vincula, among other places. The closest station to Coggeshall is Kelvedon station, about 2.4 miles south. Well-known places in the area include Laundry & Mangle Museum (0.8 miles west) and Halstead Hospital (5.6 miles north-west). Open spaces near Coggeshall include Belcher's and Broadfield Woods.
Bathroom resealing across CO6: local notes
Across CO6, from Braintree, Mile End and Coggeshall outwards, we see bathrooms and kitchens of every age. Family bathrooms, rented flats and hotel en suites all need their sealant and grout renewing in time.
The South East is one of the drier parts of the UK, though outside sealant still needs a dry, clean joint, so work across CO6 is planned around the weather.
Coggeshall: For an older house near a landmark such as St Peter ad Vincula, timber floors under older bathrooms flex, so joints need a sealant that moves with them. For site and facilities teams at buildings such as Honywood Community Science School, we reseal washrooms and kitchens in schools and businesses as well as homes.
For landlords and businesses
Letting agents and landlords in CO6 can book us as well as homeowners. Sealant work between tenants keeps a property looking cared for before the next move-in.
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Looking after it afterwards
Looking after new joints is easy, and it makes a real difference:
- Look for lifting corners and small gaps now and then
- Wipe the sealant dry after showering
- Don’t leave water standing on kitchen joints
- Let new sealant cure fully before it gets wet
Give the silicone time to cure before it gets wet, which is normally around 24 hours. Once it’s cured, wiping it down after use keeps it looking new.
Each shower pushes a little more water through a failed joint. Over time that water reaches floors, walls and ceilings. Early resealing closes the gap before damage is done.
Should I try it myself first?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Honest limits
A few problems are outside what sealant work can do:
- A leaking waste, trap or valve
- Cracks in the tray itself rather than the joint
- Water getting in through the grout rather than the sealant
Surface by surface
Baths
Most bath leaks begin along the long edge, particularly where there’s a shower over the bath. We finish it with a single, even bead of anti-fungal silicone.
Basins & vanity units
A vanity top has a joint along the wall and sometimes at the sides. If water gets in, the cabinet underneath can swell, so the joint is sealed in one unbroken line.
Your questions about bathroom resealing in CO6
Can I do it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. If it does not work out, we can redo it.
Do you have insurance?
Yes. Mr Mastic is fully insured.
What colours of sealant can you use?
White, clear and a range of colours are available. Where the joint is on show, we match it to the surface.
Do I have to be there?
That depends on where the joints are. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
What do you put in the joint?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure your landlord agrees.
Do you guarantee your resealing?
Yes, a 12-month guarantee. Good ventilation and gentle cleaning help it last.