Scotland
Remedial Sealant in Moray
From the largest town to the smallest village in Moray, our applicators can help with remedial sealant. Clear quotes up front, and a one-year guarantee.
Where we work in Moray
Removing failed, mouldy or leaking sealant and putting it right. Pick your town below to see the details for your area, and get in touch for a quick quote.
Largest places
Also in Moray
- Glazing & conservatory sealant
- New-build mastic & snagging
- External & façade joints
- Regrouting
- Window & door mastic
- Bathroom & kitchen resealing
- Commercial & hotel sealant
- Floor & skirting joints
- Gutter, fascia & soffit sealing
- Sand mastic for sash & case windows
- Fire-rated sealant
Postcode districts
How remedial sealant works in Moray
Getting old sealant out properly is slow, careful work. We cut out every layer, clear the residue and degrease the surfaces, without scratching tiles, trays or frames. New sealant only bonds to a clean, dry joint. Typical jobs include dark patches showing through the sealant and caulk or the wrong sealant used in a wet area, across botched or over-sealed joints, shrunken worktop sealant and failed movement joints.
Every visit runs the same way: we check the joints, protect the area around them, do the work and tidy away. It generally takes a few hours, depending on how many layers have to come out.
- We protect the surfaces around the joint.
- Every layer of failed sealant is stripped out.
- The joint is degreased and checked for movement and leaks.
- Once dry, a suitable sealant is applied and tooled.
- You get the cure time and our view on why the joint failed.
Pricing in Moray
The cost depends on the amount of work, how hard the old material is to remove and access to the work. You’ll have a clear quote before any work starts.
Why book with us
- Fully insured
- 20+ years of sealant experience
- Tidy, careful work
- A choice of colours where the product allows
Ask for a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.
Around Elgin
In Elgin, that means homes and buildings near The Muckle Cross pub, Cooper Park and St Columba's Church of Scotland, among other places. There’s a railway station in Elgin itself: Elgin station. A little further out are Dr Gray's Hospital (0.6 miles west) and St Giles Centre (less than half a mile north-west). Green spaces nearby include Loch Spynie.
Where we work in Moray
Across Moray, from Elgin, Buckie and Forres outwards, we see bathrooms and kitchens of every age. Sealant and grout wear out in all of them, whether it’s a family bathroom, a rented flat or a hotel en suite.
We work across all of Scotland, from the cities to the islands, and Moray is part of that. Longer journeys are planned in advance, and outdoor work around the weather. Along the coast in Moray, window and wall joints facing the sea take the brunt of the weather, so they’re often the first to fail. The right product and careful preparation help it last.
Elgin: If you look after a building such as Elgin High School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. In the older streets around St Columba's Church of Scotland, older homes can move a little, which is hard on rigid grout and tired sealant.
Different surfaces, different methods
Over-sealed & botched joints
A thick bead smeared across tiles often hides mould or gaps. Taking it back shows what’s underneath, then reseal neatly.
Windows & doors
A frame that keeps leaking may not be the mastic. We check the joint and tell you if it looks to be something else.
Should I try it myself first?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
If you’ve already had a go yourself, that is fine. We cut it out and start again, so tell us about it when you ask for a quote.
How we quote for remedial sealant
Every job gets its own quote. This is what makes a difference:
- Whether there’s mould to deal with
- The old material and how stubborn it is
- Which sealant suits the joint
- How many rooms, windows or areas are involved
Combining jobs into one visit normally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. We’ll give you a clear price for the lot.
Asking for a quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- What’s wrong with the joints now
- Photos by email, if that’s easy
- Any access issues, like height or stairs
- Roughly how big the job is
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we will explain what’s involved.
For landlords and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can go on one quote.
We work for letting agents and landlords as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order.
Honest limits
Before you book, it’s worth knowing the limits:
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Older mastics that may need an asbestos check before removal
- A tray or bath that’s cracked
Moray questions
Are you fully insured?
Yes. We’re fully insured.
Can you reseal a split movement joint?
Yes. If a joint has been filled with mortar or rigid filler, we rake it out where possible, then the joint is sealed properly.
Do you offer different sealant colours?
Most of the time, yes. We’ll tell you which colours the right product comes in.
What sealant do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.
Will you leave a mess?
No. We work neatly, protect the area around the joints and tidy up afterwards.
What should I tell you?
The location, the problem and the rough size of the job. Photos by email help too.
How long will it take to strip and reseal the joint?
A little longer than a standard reseal. For most joints, it’s a few hours.