Moray · Scotland
Remedial Sealant in Keith
Our applicators work in Keith on removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly.
- A second bead peeling off the first
- Smears and lumps from a botched reseal
- Mould trapped under a layer of silicone
What happens if it’s left?
Stripping out botched sealant adds time to a reseal, but rarely a lot: the work takes a few hours for most joints, depending on how much old sealant has to come out. It’s far less disruption than resealing the same joint again and again. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Why book with us
- Sanitary silicone with an anti-fungal additive in wet areas
- Every job guaranteed for a year
- Rated 4.9 stars on Google
- A sealant colour to suit the surroundings
Read what affects the cost or what customers say.
About our remedial sealant in Keith
A joint that keeps letting you down needs more than another bead. It helps to have pictures when you send an email to info@mrmastic.co.uk. We work on botched or over-sealed joints, expansion joints and shrunken worktop sealant, and common reasons people get in touch are gaps opening along the back of the worktop and caulk or the wrong sealant used in a wet area.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Where a building moves, cracked grout and split sealant are normally the first signs.
Each job carries a 12-month guarantee, large or small.
- Place
- Keith (AB55)
- Wider area
- Moray
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Your questions about remedial sealant in Keith
Can you help a landlord with a rental near Keith station?
Yes, rental work is part of what we do. You can drop us a line at info@mrmastic.co.uk with the address and a few details, and we will give you a fixed price before any work starts.
Do you work for hotels and guest houses in Keith?
Yes, hotels and guest houses are among the places we work. Rooms can be done a few at a time, so the building stays open.
What does remedial sealant cost?
Size, access and the old material all affect the cost. Ask us for a quote.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. If you can, email a few pictures.
Do you work in Keith?
Yes. We are based in Crawley and work across South East England, London and Scotland, and that includes Keith.
Do you hold any approvals?
Yes. We are an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
Can old silicone be taken off without scratching the tiles?
Yes. Careful removal is most of a remedial job, especially on acrylic, enamel and uPVC.
When is the sealant fully cured?
Different products cure at different speeds, so follow the cure time we give you when we finish.
Do you need remedial sealant in Keith?
Even good sealant ages. Over the years it shrinks, hardens and gets colonised by mould. At that point it has to come out.
Signs it’s time to call us include:
- A shower that leaks however often it’s resealed
- Movement joints that have split or pulled away
- Beads that never stuck properly
- Black mould underneath the bead
If you look after a building such as Keith Grammar School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Questions to ask before booking
- How the surfaces are prepared before sealing
- What insurance they hold
- What product goes in the joint
- Who does the work, and how experienced they are
Other services in Keith
Landlord and commercial work in Keith
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we will give you a quote.
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
What remedial sealant looks like in Keith
Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Tired, leaking sealant is worth putting right before a new tenant moves in. Keith has hotels and guest accommodation nearby. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room.
If you live in an older home near St Rufus Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them. Letting a property close to Keith station? Then botched sealant from a previous quick fix is easier to strip out between tenants.
Keith is about 9 miles south of Buckie, in Moray. If you need remedial sealant in Keith, it’s easy to get a quote: please send an email to info@mrmastic.co.uk. We are based in Crawley and cover Moray, Keith included. Keith is one of 58 places in Moray we cover for remedial sealant. You can also see our page for Aberdeen, roughly 41 miles from Keith.
We work across AB55 for remedial sealant and the streets around it. If you need remedial sealant at a property on Church Road, Station Road and Turner Street or anywhere close by, our applicators can take on the job. Keith is on the A95 and A96, which makes it straightforward to reach with everything needed for remedial sealant. Neighbouring places we cover for remedial sealant include Newmill (1 mile north), Drummuir (5 miles south-west), Cairnie (5 miles south-east), Ruthven (5 miles south-east) and Fochabers (7 miles north-west). Larger places within reach include Elgin (15 miles north-west), Buckie (9 miles north), Ashgrove (15 miles north-west), Portknockie (12 miles north), Cullen (11 miles north-east) and Findochty (11 miles north). Keith is among the bigger towns we cover in Moray. If you are somewhere remote, the job takes a little more planning.
What’s near Keith
In Keith, that means homes and buildings near Seafield Arms Hotel and the streets around them. The nearest railway station is Keith station, about 0.6 miles north of the centre. Nearby you’ll also find Turner Memorial Hospital (less than half a mile north-west) and Pitlurg Castle (3.1 miles south). The countryside around Keith includes The Balloch.
What affects the cost of remedial sealant
Call for a quick quote. What matters most is:
- Mould in or behind the old joints
- The type of sealant required
- The amount of work
- How many rooms, windows or areas are involved
What it costs depends on the size of the job, how hard the old material is to remove and access to the work. You’ll have a clear quote before any work starts.
What we need to know
You do not need to know the technical terms. Just tell us:
- If someone has resealed it before
- Whether it’s a home or a business
- A few photos by email, if you can
- The problem you’ve noticed
Asking for a quote is easy: let us know the job and the location and its rough size. A few photos by email make the job easier to understand.
Honest limits
We will not take on work that will not last, so these are the limits:
- Cracks in the fitting rather than the joint
- Tiles that have come away from the wall
- A tray or worktop that needs refixing first
Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly.
Where we work in Keith
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Leaking tray & enclosure joints
- Botched or over-sealed joints
- Failed movement joints
- Expansion joints
How the visit works
Before we leave, we go over the finished joints with you and explain the cure time. The visit itself usually takes a few hours for a typical bath or shower, longer where several layers have been applied, depending on the size of the job. For a place like Keith, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Each layer is cut out and the residue cleaned off.
- We treat any mould and dry the joint thoroughly.
- The right product goes in, with backing where the joint moves.
- The joint is tooled and you’re told about anything else we found.
How to prepare
- Mention any leaks or damp you’ve noticed
- Keep children and pets away from the work area
- Let us know about parking restrictions
Get a quote
Every job is quoted individually, so the first step is telling us about yours. Simply send an email to info@mrmastic.co.uk and describe the job, and photos are welcome.
Read more
Can I do it myself?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.