Moray · Scotland
Gutter Sealing in Keith
Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims for Keith, backed by a 12-month guarantee. Call for a quick quote.
- Damp on an inside wall under a dripping gutter
- Failed sealant on a garage door frame
- Water dripping where gutter sections meet
Gutter sealing in Keith
Sealant only bonds to a clean, dry joint. That is why we take out the old sealant and dirt first, then dry the joint before sealing. We work on roofline trims, uPVC fascias and gutter joints, and people most often call us about quick sealant fixes on gutters that didn’t last and water running down the wall below the gutter.
Stone walls need a stone-friendly sealant, as acetoxy products can attack some stone. Newer houses need their movement joints and roofline trims kept sound.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Place
- Keith (AB55)
- Region
- Moray
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
DIY sealant or a professional job?
A DIY attempt doesn’t rule out a professional job. We cut it out and start again.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Gutter sealing in Keith: local notes
Harled (roughcast) walls are common in Scotland, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface. Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and failed outside joints work against that.
Schools such as Keith Grammar School are buildings too, and larger buildings have long runs of movement joint that eventually need resealing. If you let a flat or house near Keith station, a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside. In the older streets around St Rufus Church, older walls, gutters and the joints where extensions meet them need a flexible sealant.
Keith is about 9 miles south of Buckie, in Moray. Anywhere in AB55, we cover gutter sealing for homes and businesses. Our area takes in 58 places across Moray, from the larger towns to small villages. We also work in Aberdeen, around 41 miles away.
Every address in AB55 is covered for gutter sealing. We cover properties on Church Road, Station Road and Turner Street and the roads around them. With the A95 and A96 close by, Keith is simple for us to get to for gutter sealing. Other places close to Keith include Newmill (1 mile north), Drummuir (5 miles south-west), Cairnie (5 miles south-east), Ruthven (5 miles south-east) and Fochabers (7 miles north-west). Further out, we also cover Elgin (15 miles north-west), Buckie (9 miles north), Ashgrove (15 miles north-west), Portknockie (12 miles north), Cullen (11 miles north-east) and Findochty (11 miles north). Keith is one of the larger places we cover in Moray. For island and remote addresses, a little more planning is needed, so mention it when you ask for a quote.
Near you in Keith
We work in homes and buildings around Seafield Arms Hotel and the streets around them. The nearest railway station is Keith station, about 0.6 miles north. A little further out are Turner Memorial Hospital (less than half a mile north-west) and Pitlurg Castle (3.1 miles south). Green spaces nearby include The Balloch.
What the job involves on each surface
Gutter end caps
We seal end caps from the inside where we can reach once clean and dry.
uPVC fascias
Open fascia joints look untidy and can let water in. A neat bead closes them up.
Work for landlords, hotels and businesses
Letting agents and landlords in Keith can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for before the next move-in.
Housing providers, facilities teams and property managers book us too in Keith and across Moray. We can quote a run of properties together, and we are fully insured.
Why it’s worth doing now in Keith
You don’t need new fascias just because the joints have opened. A neat seal closes the gaps if the boards are sound. Exposed walls in smaller Scottish places take a lot of wind and rain, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
The cost depends on how much there is to do, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before work begins.
Why Keith customers choose us
- 4.9 on Google from 180+ five-star reviews
- Neat joints and a tidy finish
- Quality sealants from Arbo and Everbuild
- Colour picked to suit the job
Take a look at our cost guide and customer reviews.
When something else is needed
We’d rather tell you now than do work that will not last, so these are the limits:
- A gutter length that has split
- Blocked downpipes
- Problems with the roof covering
Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly before booking.
Joints and surfaces we work on
- Gutter joints
- uPVC fascias
- Roofline trims
- Soffit joints
- Gutter end caps
- Garage door frames
The process
There is not much for you to do on the day. Show us the job and we’ll take it from there. The job generally takes an hour or two for a few joints, longer for a full run, including the tidy-up. Somewhere like Keith may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- First we agree which joints need sealing.
- We clean out each joint.
- The joints are dried.
- The sealant is applied and finished.
- The joints are checked once sealed.
Before we arrive
- Tell us if parking is tricky
- Mention any tricky access
- For business premises, tell us about site rules or sign-in
Getting a quote
We don’t publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, email us at info@mrmastic.co.uk.
Related advice
Quotes for gutter sealing in Keith
You will get a clear quote before any work starts. It takes into account:
- Whether there’s mould to deal with
- The size of the job
- When we can work, for business premises
- Whether the work is at height
Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs. Ask us for a quote and we will go through it with you.
What we need to know
To help us quote quickly, please include:
- Any previous sealing or DIY work
- Access, such as stairs, a lift or height
- What’s wrong with the joints now
- Where the job is, and your postcode
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. When it suits you, drop us a line at info@mrmastic.co.uk.
FAQs for Keith
Do you work for landlords with property near Keith station?
Yes. We work for landlords and letting agents as well as householders, and several properties can go on one quote. You can email us at info@mrmastic.co.uk with the details for a clear quote.
Can you do gutter sealing in Keith?
Yes, Keith is within the area we cover. Our work covers the whole of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job.
Will sealing fix a sagging gutter?
It will not last. The movement opens the joint again so the gutter has to be refixed first.
Can you reach high gutters?
Single-storey work is the most straightforward. We’ll confirm the access for higher gutters before we book.
What does gutter sealing cost?
We do not publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
Will the old sealant be removed?
Yes, always, and completely. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
Is it messy?
Tidy work is part of the job. We protect what’s around the joints, and the area is left clean when we finish.
Is it worth trying it myself?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.