Perth and Kinross · Scotland
Bathroom & kitchen resealing in Perth, Perth and Kinross
Our applicators work in Perth on bath, shower, basin, wet room, worktop and sink resealing. Old material cut out, joints cleaned and sealed neatly.
- Sealant that has split, shrunk or peeled away
- A messy, uneven bead from a previous reseal
- Mouldy sealant that has gone black
About our bathroom resealing in Perth
Homes in Perth have the same weak spots as anywhere else: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Each one is stripped, cleaned and dried before new silicone goes in. Typical jobs include a reseal done over the top of the old bead and a messy, uneven bead from a previous reseal, across wet rooms, baths and sinks & splashbacks.
Around Perth, we see everything from older flats to family homes on newer estates. The jobs are much the same in all of them: mouldy beads, gaps where a bath has moved and grout that is cracked or stained.
A 12-month guarantee comes as standard.
- Place
- Perth (PH1, PH2)
- Region
- Perth and Kinross
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Looking after it afterwards
Simple care keeps the joints in good condition. We recommend:
- Check the joints every few months for splits or lifting
- Clean with a mild bathroom cleaner and a soft cloth
- Keep bottles off the sealant line
- Avoid abrasive pads on the sealant
Clean the silicone with care: a mild bathroom cleaner and a soft cloth is enough. Avoid scouring pads and anything sharp, because a damaged bead gives mould a foothold.
Each shower pushes a little more water through a failed joint. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Early resealing closes the gap before damage is done.
Bathroom resealing in Perth: local notes
Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that doesn’t dry out. Perth has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
If you look after a building such as Perth High School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Perth is about 33 miles north of Edinburgh, in Perth and Kinross. Our applicators cover bathroom resealing for homeowners, landlords and businesses in Perth and nearby, as part of our work across Perth and Kinross. Perth is one of 107 places in Perth and Kinross we cover. For nearby work, see our Dundee page.
We cover every part of the PH1 and PH2 postcode area for bathroom resealing and the streets around it. You will find streets such as Simpson Square, High Street and Moredun Square, and we cover them all. You’ll find Perth on the A9 and A85, so it’s easy for us to get to. If you’re just outside Perth, we cover Oakbank (1 mile south-west), Scoonieburn (2 miles south-east), Tarsappie (2 miles south-east), Milltown of Aberdalgie (3 miles south-west) and Forgandenny (4 miles south). We also work in nearby towns such as Blairgowrie and Rattray (14 miles north), Crieff (15 miles west), Auchterarder (12 miles south-west), Kinross (13 miles south), Coupar Angus (12 miles north-east) and Rattray (14 miles north). Perth is among the bigger towns we cover in Perth and Kinross.
Landmarks near Perth
Around Perth, our work takes us to homes and buildings near North Inch, Public House and St John's Academy, among other places. The closest station to Perth is Perth station, roughly 0.7 miles south-east of the centre. Well-known places in the area include Murray Royal Hospital (1.2 miles east) and Balhousie Castle (0.6 miles north-east). Not far away are St Magdalene's Hill.
Other services in Perth
Perth questions
Do you work for hotels and guest houses in Perth?
Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.
Is Perth in your area for bathroom resealing?
Yes, Perth is within the area we cover. Our work covers the whole of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job, and we will send you a clear quote.
Do you reseal kitchen worktops and sinks too?
Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then a colour-matched bead is laid.
Can tenants book the work?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Is the work guaranteed?
Yes, for 12 months. Good ventilation and gentle cleaning help it last.
What does bathroom resealing cost?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. You will get a clear quote before we start.
Will the old sealant be removed?
Yes. Sealing over old sealant is the main reason resealing fails early, so we never do it.
Can I add another job to the visit?
Yes, and it often makes sense. Combining jobs makes good use of the visit.
Do you need bathroom resealing in Perth?
Plenty of failed sealant has been laid over the top of older sealant. Fresh silicone can’t grip the old bead underneath, so it peels, leaks and hides mould behind it.
It’s worth asking for a quote if you see:
- Damp behind the bath or under the tray
- Two layers of silicone, both failing
- Leaking joints on a shower screen
- A joint torn by a bath that flexes
For landlords with property near Perth station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Before you book anyone
- Whether VAT is included
- Are they insured?
- Which colour the sealant will be
- How hidden problems are handled
What happens on the day
We bring everything the job needs with us, so you don’t need to buy or prepare anything. Once we have agreed what’s being done, the area is protected and the work begins. Most jobs take around two hours for one bath or shower, longer for a whole bathroom. Parking around Perth is rarely difficult, though older streets in the centre can be tight. If you are in a flat with a shared stair or a door entry system, let us know when you book.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- The joint is cleaned, degreased and treated for mould.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you are told the cure time, normally around 24 hours.
Getting ready for the visit
- Mention any parking rules near the property
- Try not to wet indoor joints just before the visit
- Mention any tricky access
How to get a quote
Getting a quote is simple: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job, and we will take it from there.
Advice
How we quote for bathroom resealing
The quote reflects the job in front of us. We take into account:
- The amount of work
- How many rooms, windows or areas are involved
- Whether there’s mould to deal with
- Which sealant suits the joint
Leaving a failed joint generally makes the job bigger, not smaller, because water and mould keep working on it. If you are unsure, send an email to info@mrmastic.co.uk and we will give you an honest view and a quote.
What to tell us for a quote
When you contact us, it’s useful to know:
- Whether it’s a home or a business
- If someone has resealed it before
- What the problem is, such as mould, gaps, leaks or cracking
- Photos by email, if that’s easy
To get a quote, email us at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We’ll give you a clear quote before any work starts.
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Landlord and commercial work in Perth
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can go on one quote.
Landlords and agents in Perth can book us as well as householders. Resealing between tenancies keeps a property looking cared for.
Why deal with it now?
A clean new bead makes a room look cared for, which matters if you’re letting a property or selling it. Lumpy sealant with smears on the tiles has the opposite effect. In flats with a shared stair in Perth, a leak from a failed seal can affect the flat below too, which turns a small job into a bigger one.
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
Why book with us
- A 12-month guarantee on all work
- An ARBOMaster approved applicator
- Arbo and Everbuild products
- Homes, businesses and hotels
Take a look at our cost guide and our reviews.