Perth and Kinross · Scotland
Bathroom & kitchen resealing in Blairgowrie and Rattray, Perth and Kinross
Bath, shower, basin, wet room, worktop and sink resealing for Blairgowrie and Rattray, backed by a one-year guarantee. Ask us for a quote.
- Cracked, shrunken or lifting silicone
- Lumpy, uneven sealant from a DIY attempt
- Water getting behind the bath panel
Aftercare tips
To keep the joints looking good and working properly:
- Clean with a mild bathroom cleaner and a soft cloth
- Check the joints every few months for splits or lifting
- Keep scourers and sharp tools away from the bead
- Keep the fan on for a while after bathing
Treat the new bead gently when you clean: warm soapy water and a soft cloth do the job. Avoid scouring pads and anything sharp, and a nicked bead lets mould in sooner.
Each shower pushes a little more water through a failed joint. Over time that water reaches floors, walls and ceilings. Resealing early stops it.
About our bathroom resealing in Blairgowrie and Rattray
A reseal only lasts if the joint is properly prepared. Every bit of old silicone comes out, down to the thin film left on the tiles, then the joint is cleaned, degreased and treated for mould. Only once it’s dry does the new bead go on. If you’re dealing with a joint torn by a bath that flexes and lumpy, uneven sealant from a DIY attempt, we can help, whatever the surface.
Scottish water is generally soft, so homes in a town like Blairgowrie and Rattray see less limescale than many parts of England. Mould is a different story: a steamy bathroom still turns sealant and grout black.
The work is covered for a year after we finish. If there’s a problem with it, please send an email to info@mrmastic.co.uk.
- Location
- Blairgowrie and Rattray (PH10)
- Region
- Perth and Kinross
- Cover
- 12 months on all our work
- Quote
- A clear price before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Other services in Blairgowrie and Rattray
Should I try it myself first?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
How the job changes by surface
Basins & vanity units
The back of a basin gets wet every time someone washes. Old sealant there often goes black at the corners, and we treat it exactly as we would a bath.
Kitchen worktops & upstands
Kitchen joints need more degreasing than bathroom ones, because cooking grease stops sealant bonding. The extra cleaning is what makes the bead last.
FAQs for Blairgowrie and Rattray
Is there a guarantee on bathroom resealing in Blairgowrie and Rattray?
All our work, in Blairgowrie and Rattray and everywhere else, comes with a 12-month guarantee. We’re fully insured, and an ARBOMaster approved applicator.
Do you take on hotel work around Blairgowrie and Rattray?
Yes, hospitality work, including hotels, is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
How much does bathroom resealing cost in Blairgowrie and Rattray?
We don’t publish prices, because the cost depends on the job: its size, the old material, access and the product needed. You will get a clear quote before any work starts.
Where are you based?
Our base is in Crawley, West Sussex, and we work across South East England, London and Scotland.
Can tenants book the work?
Yes, though it’s best to check with your landlord first. Many landlords are glad to have it sorted.
What should I tell you?
Only a few details: the address or postcode, what’s wrong and any access issues. After that, simply send an email to info@mrmastic.co.uk.
Can you quote for more than one area?
Of course. Doing several areas at once is generally more efficient.
Do you do kitchens as well as bathrooms?
Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then we reseal in a colour to suit.
What affects the quote in Blairgowrie and Rattray
Jobs vary more than people expect. What affects the quote:
- The type of sealant required
- Whether there’s mould to deal with
- The number of rooms or windows
- How easy the joints are to reach
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs. Ask us for a quote and we will explain what it covers.
What to tell us for a quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- The address or postcode of the job
- What the problem is, such as mould, gaps, leaks or cracking
- Whether it has been sealed before
- Photos by email, if that’s easy
There’s no standard price list, because every job is different. Instead, we give you a clear price for your job. To get started, email us at info@mrmastic.co.uk.
For landlords and businesses
We work for landlords and agents as well as homeowners. Resealing between tenancies keeps a property looking cared for before the next move-in.
For anyone letting property in or around Blairgowrie and Rattray, several properties can be quoted together. Send us the addresses and the work at each, and pictures by email help.
What we are called out for in Blairgowrie and Rattray
Baths and trays move. An acrylic bath flexes under load, while a poorly supported tray can shift underfoot. Over time the joint tears or pulls away from the tile.
The problems people generally mention when they call include:
- Sealant that has split, shrunk or peeled away
- Smears of silicone across the tiles
- Water getting behind the bath panel
- Leaking joints on a shower screen
For site and facilities teams at buildings such as Blairgowrie High School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
What to look for in a quote
- Whether they’re fully insured
- Who does the work, and how experienced they are
- What preparation is included
- How the colour is chosen
What we do, step by step
At the end, we look at the finished work together. The work normally takes a morning or an afternoon for most single baths and showers, depending on how much there is to do. In a Scottish town like Blairgowrie and Rattray, parking is generally straightforward, though older centres can be tighter. For flats, mention the shared stair or door entry system.
- We cover the area around the joints we’re working on.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Preparing for the visit
- Clear items away from the joints we are working on
- Tell us about access, such as stairs, a lift or high-level joints
- Mention if the joints have been sealed before
How to get a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. Whenever you are ready, email us at info@mrmastic.co.uk.
Advice
Blairgowrie and Rattray homes and their sealant
Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black. In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
Around Blairgowrie and Rattray, as everywhere, bathroom resealing is only as good as the preparation behind it.
Blairgowrie and Rattray is about 14 miles north of Perth, in Perth and Kinross. We carry out bathroom resealing for homes and businesses in Blairgowrie and Rattray and nearby. Blairgowrie and Rattray is one of 107 places in Perth and Kinross we cover for bathroom resealing. You can also see our page for Dundee, roughly 16 miles from Blairgowrie and Rattray.
Here we cover the PH10 postcode area for bathroom resealing. If you need bathroom resealing at a property on High Street, Mitchell Square and Back Brae or a nearby road, our applicators can take on the job. You will find Blairgowrie and Rattray on the A93 and A923, which makes it straightforward to reach with everything needed for bathroom resealing. Neighbouring places we cover for bathroom resealing include Rattray (1 mile north-east), Carsie (2 miles south), Kinloch (2 miles west), Meikleour (4 miles south) and Coupar Angus (4 miles south-east). Further out, we also cover Perth (14 miles south), Letham (14 miles south), Scone (12 miles south), Tulloch (13 miles south), Alyth (5 miles north-east) and Oakbank (15 miles south). Blairgowrie and Rattray is among the bigger towns we cover in Perth and Kinross.
Around Blairgowrie and Rattray
Locally, jobs take us to homes and businesses close to The Ericht Ale House, among other places. Other landmarks nearby include Lethendy House (3.2 miles south-west) and Blairgowrie Community Hospital (under half a mile south-west). For a walk, there’s Rae Loch and Hill of Alyth.