Perth and Kinross · Scotland
Commercial Sealant in Perth
Problem with your washrooms, bathrooms and kitchens in Perth? We remove the old material, prepare the joints and seal them properly.
- Too many rooms to reseal without closing the building
- Black, stained silicone in guest bathrooms
- Tired sealant in let properties
What commercial sealant looks like in Perth
There are hotels and other places to stay in and around Perth. Hotel work can be planned room by room, with out-of-hours working where needed. In Scotland, private landlords have to meet the Repairing Standard, so landlords with several properties often need sealant work across them all.
Letting a property close to Perth station? Then several rental properties can be resealed on one programme.
Perth is about 33 miles north of Edinburgh, in Perth and Kinross. Perth gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Across Perth and Kinross, we cover 107 places, and Perth is one of them. You can also see our page for Dundee, about 19 miles away.
Our applicators cover all of the PH1 and PH2 postcode area for commercial sealant and the streets around it. Local streets include Simpson Square, High Street and Moredun Square, all of which we cover. Perth sits on or near the A9 and A85, so getting to you is simple. We also cover the places around Perth: Oakbank (1 mile south-west), Scoonieburn (2 miles south-east), Tarsappie (2 miles south-east), Milltown of Aberdalgie (3 miles south-west) and Forgandenny (4 miles south). Further out, we also cover Blairgowrie and Rattray (14 miles north), Crieff (15 miles west), Auchterarder (12 miles south-west), Kinross (13 miles south), Coupar Angus (12 miles north-east) and Rattray (14 miles north). Being one of Perth and Kinross’s larger places, Perth has homes, rented property and businesses of every kind.
Landmarks near Perth
Around Perth, our work takes us to homes and buildings near North Inch, Public House and St John's Academy. Perth’s nearest station is Perth station, about 0.7 miles south-east. Other landmarks nearby include Murray Royal Hospital (1.2 miles east) and Balhousie Castle (0.6 miles north-east). The countryside around Perth includes St Magdalene's Hill.
How we handle commercial sealant in Perth
Mouldy or split sealant in a commercial building causes more than a bad impression. Cleaners struggle with it, water gets through it and people notice it. We reseal bathrooms, washrooms, welfare areas and kitchens so they look cared for again. Typical jobs include whole floors of tired en suites and failed floor-level joints in accessible wet rooms, across retail & leisure sites, welfare facilities and hotel bathrooms.
Commercial jobs in a town like Perth range from shops and offices to schools, hotels and care homes, all with washroom, kitchen and fire-rated joints to look after.
Big or small, it’s backed by our 12-month guarantee in Perth and across Perth and Kinross.
- Where
- Perth (PH1, PH2)
- Region
- Perth and Kinross
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Looking after it afterwards
So the new joints stay in good condition:
- Use mild cleaners on sealant, not bleach or abrasives
- Log resealing so you know what’s due
- Tell cleaning staff when each room can be used
- Include the silicone on your room checklists
Squeegees in guest and staff showers help: walls and trays dry faster, and so does the sealant.
Signs to look for: black spots in the silicone, corners lifting, staining on the ceiling below or a musty smell. Any of these means the joints need attention.
Places near Perth
Other services in Perth
When something else is needed
We will not take on work that will not last, so these are the limits:
- Fire risk assessments or certification
- Poor ventilation that keeps bringing mould back
- Damaged sanitaryware that needs replacing
If you’re not sure, just send an email to info@mrmastic.co.uk and we will give you a straight answer before you book.
Where we work in Perth
- Hotel bathrooms
- Retail & leisure sites
- Office washrooms & kitchens
- Student & care accommodation
- Welfare facilities
- Rental portfolios
How it works
You do not need to clear the whole room or building, only the area right around the joints. Everything nearby is protected, and the job takes a few hours per area, with larger sites planned over several visits for a typical job. Parking around Perth is rarely difficult, though older streets in the centre can be tight. If you’re in a flat with a shared stair or a door entry system, let us know when you book.
- The first visit is a look round the site to agree the scope.
- We agree when we’ll work, with early or out-of-hours slots where they can be arranged.
- Each area is protected and stripped of old sealant.
- Once dry, every joint is resealed and tooled.
- We let your team know the cure time for every area.
Before we arrive
- Mention any leaks or damp you’ve noticed
- For indoor joints, keep the area dry beforehand if you can
- Let us know about parking restrictions
Ask for a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that is easy.
Related advice
For landlords and businesses
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
Letting agents and landlords in Perth can book us as well as householders. Sealant work between tenants is a simple way to keep a property in good order.
Why act early in Perth
Patching the worst rooms as complaints come in is hard to manage. A planned programme works through every room, with less disruption and one clear quote. For landlords in Perth, damp and leaks can fall under the Repairing Standard. Replacing failed sealant early is simpler than dealing with a complaint.
What it costs depends on the size of the job, how much old material has to come out and access to the work. We give a clear quote before we start.
What you get with us
- A sealant colour to suit the surroundings
- An ARBOMaster approved applicator
- 4.9 on Google from 180+ five-star reviews
- We leave the area clean and tidy
Should I try it myself first?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
FAQs for Perth
Do you work for hotels and guest houses in Perth?
Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.
I let a flat near Perth station. Can you help?
Yes. We work for landlords and agents as well as homeowners, and several properties can go on one quote. Just email us at info@mrmastic.co.uk with the address and what needs doing, and we will send you a clear quote.
How soon can a room be used after resealing?
Most areas can be used after around 24 hours. Each room is handed back with the cure time for the product used.
How much does commercial sealant cost in Perth?
It depends on the job, so we quote each one individually. For a quick quote, drop us a line at info@mrmastic.co.uk with a short description of the job.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Do you come to Perth?
Yes. We cover Perth and the rest of Perth and Kinross, as part of our work across South East England, London and Scotland. To book, send an email to info@mrmastic.co.uk.
Where are you based?
Mr Mastic is based in Crawley. Our applicators cover Perth.
Which products do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
When to call us in Perth
In an accessible wet room, water spreads across the floor every use, so the joints at floor level are under water often. A failed joint there can soon let water into the floor or walls.
Most people get in touch after spotting something like this:
- Large numbers of bathrooms needing the same work
- Failed floor-level joints in accessible wet rooms
- Rental bathrooms that need resealing between tenants
- Sealant failing again soon after quick repairs
Managing a site like Perth High School? Then washroom and kitchen sealant can be programmed around term times or opening hours.
Before booking anyone
- What product goes in the joint
- When the joint can take water or movement
- What insurance they hold
- Whether you can choose the colour