Argyll and Bute · Scotland
Mastic man in PA46
We cover every part of the PA46 postcode district, which takes in Bunnahabhain, Keills and Port Askaig. Old sealant is always cut out completely, with a one-year guarantee.
Places in PA46
What we do in PA46
- Regrouting
- Fire-rated sealant
- Floor & skirting joints
- Glazing & conservatory sealant
- Sand mastic for sash & case windows
- Remedial sealant & repairs
- External & façade joints
- Commercial & hotel sealant
- Gutter, fascia & soffit sealing
- Window & door mastic
- Bathroom & kitchen resealing
- New-build mastic & snagging
- All services
Let us know the job and your postcode for a quick quote: email us at info@mrmastic.co.uk.
Nearby postcode districts
More in Argyll and Bute
All places in Argyll and Bute
Every area we cover
Bathroom resealing across PA46: what to expect
We fill the bath before sealing it. The weight settles the bath to its lowest point, so the new joint is not pulled apart the first time it’s used. It’s a small step that rushed reseals tend to skip. Typical jobs include splits where the tray meets the wall and water getting behind the bath panel, on kitchen worktops & upstands, sinks & splashbacks and baths.
On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The job generally takes half a day or less for one room, longer when the kitchen is included, including the tidy-up.
- We cover the area around the joints we are working on.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
How we quote
The cost depends on how much there is to do, how much old material has to come out and access to the work. You’ll have a clear quote before any work starts.
What you get with us
- Approved under the ARBOMaster scheme
- Fully insured
- White, clear, grey or another colour, product permitting
- Sealant colour chosen to suit
Ask for a quote
For a quote, send an email to info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We’ll give you a clear quote before any work starts.
Around Bunnahabhain
A little further out are Finlaggan Castle (3.8 miles south-west). Open spaces near Bunnahabhain include Giùr-bheinn and Ardnahoe Loch.
Bathroom resealing across PA46: local notes
Homes across PA46 range from older properties to new builds, with plenty of rented property in places like Bunnahabhain, Keills and Port Askaig. Sound sealant and clean grout keep water out and rooms looking cared for.
Scottish weather is hard on outside joints, especially in the wetter west. Sealants for jobs in PA46 are chosen with that in mind. Along the coast in PA46, holiday lets and guest houses can have bathrooms in near-constant use, so their sealant and grout wear faster than most.
Bunnahabhain: Whether the job is in Bunnahabhain itself or nearby, the right material for each joint matters as much as a neat finish. In and around Bunnahabhain, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
Looking after it afterwards
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Let new sealant cure fully before it gets wet
- Move toiletries away from the joint
- Clean with a mild bathroom cleaner and a soft cloth
- Check the joints every few months for splits or lifting
Check the sealant now and then. Small splits and lifting ends are easy to catch early, and if anything looks wrong, just email us at info@mrmastic.co.uk.
A split bead lets water through every time the bath or shower is used. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Resealing early stops it.
What sealant work cannot fix
In fairness, some problems need a different trade:
- Movement from a bath with loose feet or no proper support
- Tiles that have come away from the wall
- Leaks from a shower valve, waste or pipework (a plumber’s job)
DIY versus a professional finish
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
Why act early?
Sorting it now is quick: it takes a couple of hours for a single bath or shower. Wait for a leak and you may be looking at panels off, drying out and redecorating too.
Comparing quotes
- What preparation is included
- How the colour is chosen
- How long the guarantee is
- How much experience the applicator has
Landlords, agents and businesses in PA46
Hotels need rooms back in use, so the work can be planned room by room. We have worked in hotels as well as homes and businesses.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.
FAQs for PA46
Can you just seal over the old silicone?
No. New silicone will not bond to old silicone, so it lifts and traps water and mould underneath. We always take the old sealant out completely.
Can I choose the colour of the sealant?
We can use white, clear or a colour to suit. Where the joint is on show, we match it to the surface.
Do you guarantee your resealing?
Yes. Our one-year guarantee covers every job, and we are fully insured.
Do you take out the old sealant first?
Yes, always, and completely. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We explain the product when we quote.
Do you work for landlords and businesses?
Yes. We work in homes, commercial premises and hotels.
Do you reseal kitchen worktops and sinks too?
Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then we reseal in a colour to suit.