Argyll and Bute · Scotland
Window & door mastic in Bunnahabhain, Argyll and Bute
Problem with your window and door frames in Bunnahabhain? We cut out the old, prepare the joints and apply the right sealant.
- Cold air getting in at the frame edge
- Gaps between the frame and the inside reveal
- Hard, cracked sealant around windows
Bunnahabhain homes and the weather
Bunnahabhain is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That’s hard on the mastic around window and door frames, especially on the side facing the sea. Sash and case windows are common in older Scottish homes, and the joint between the box frame and the stone or render is traditionally pointed with sand mastic.
Whether the job is in Bunnahabhain itself or nearby, the right material for each joint matters as much as a neat finish. In and around Bunnahabhain, as anywhere, good window mastic starts with a clean, dry, properly prepared joint.
Bunnahabhain is in Argyll and Bute. Homes, rented property, offices and hotels in Bunnahabhain is covered for window mastic, old or new, large or small. Every job comes with our 12-month guarantee. 118 places in Argyll and Bute are on our list, large and small. We also work in Glasgow, around 72 miles away.
All of PA46 is within our area for window mastic, from the main roads to the quietest streets. We also cover the places around Bunnahabhain: Port Askaig (2 miles south), Keills (3 miles south), Craighouse (7 miles east), Bowmore (11 miles south-west) and Scalasaig (13 miles north). If you’re somewhere remote, a little more planning is needed, so let us know when you get in touch.
Local landmarks in Bunnahabhain
Well-known places in the area include Finlaggan Castle (3.8 miles south-west). For a walk, there’s Giùr-bheinn and Ardnahoe Loch.
Window mastic for homes and businesses in Bunnahabhain
Behind a thin line of old mastic there’s sometimes a deep void. Filling it with sealant alone leaves a joint that can’t move properly, so we fit backing rod to set the right depth. That way the new bead bonds to the frame and the wall only. We are often asked to deal with mastic that’s falling out in pieces and draughty joints inside around the window, across window sills, timber windows & doors and uPVC windows.
In and around a place like Bunnahabhain, homes range from older stone-built cottages to newer houses. Wind-driven rain finds any gap around a frame or sill, so the mastic there works hard.
A 12-month guarantee comes as standard, so you’re not left on your own once the job is done.
- Place
- Bunnahabhain (PA46)
- Region
- Argyll and Bute
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
When it is not the sealant
We will always be straight with you, so here’s what sealant can’t fix:
- A frame that has rotted at the joint
- Penetrating damp from a failed cavity tray or render
- Misting between the panes of a double-glazed unit (that needs a new unit)
If you’re not sure, just send an email to info@mrmastic.co.uk and we’ll give you a straight answer.
Surfaces we seal
- Aluminium frames
- Window sills
- Timber windows & doors
- uPVC windows
- Composite doors
- Patio & French doors
Why deal with it now?
Working on frames from a ladder with a sealant gun isn’t easy, especially upstairs. We cut out properly, back deep gaps and tool every joint neatly, in a sealant suited to the wall. Around Bunnahabhain, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
What you pay reflects the work, not a rough estimate. That’s why we ask a few questions first.
Why book with us
- Trusted Arbo and Everbuild sealants
- A sealant colour to suit the surroundings
- Anti-fungal sanitary silicone in wet areas
- Domestic, commercial and hotel work
Your questions about window mastic in Bunnahabhain
Is Bunnahabhain within the area you cover?
Yes, we do. Our work covers the whole of Scotland, and smaller places are part of that. Longer journeys are simply planned in advance.
Is Bunnahabhain in your area for window mastic?
Yes. Our work covers the whole of Scotland, and Bunnahabhain is part of that. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing, and we’ll give you a clear quote.
Can you work on commercial sites?
Yes. Commercial and hotel work is a large part of what we do, as well as homes. We can talk about working times when we quote.
Can I paint over the new sealant?
Most silicone cannot be painted. If you plan to paint, tell us first and we can use a paintable sealant where it suits the joint.
Can you quote for more than one area?
Yes, and it often makes sense. Combining jobs makes good use of the visit.
Where is Mr Mastic based?
We work from Crawley. We cover Bunnahabhain and the rest of Argyll and Bute.
How long does it take to reseal the windows on a house?
It depends on access, the old mastic and the size of the frames. We will tell you how long your job needs when we quote.
What do you put in the joint?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
Landlord and commercial work in Bunnahabhain
Landlords and agents in Bunnahabhain can book us as well as householders. Resealing between tenancies is a simple way to keep a property in good order before the next move-in.
Housing providers, facilities teams and property managers book us too in Bunnahabhain and across Argyll and Bute. We can quote a run of properties together.
What affects the cost of window mastic
There’s no set price list, because jobs vary so much. The quote depends on:
- Access and height
- Any working-time requirements on site
- The old material and how stubborn it is
- The number and length of the joints
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re not sure whether it needs doing, send an email to info@mrmastic.co.uk for an honest opinion and a quote.
What to tell us for a quote
You don’t need to know the technical terms. It helps if you can tell us:
- What’s wrong with the joints now
- Where the job is, and your postcode
- Whether it’s a home or a business
- Photos by email, if that’s easy
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
Places near Bunnahabhain
Other services in Bunnahabhain
Aftercare tips
To keep the joints looking good and working properly:
- Check the mastic once a year
- Clear any debris from frame drain holes
- Paint up to the joint, not over it
- Wipe condensation off the frames
Silicone can’t generally be painted, so mention any painting plans before any work starts. There are paintable sealants for joints that need it.
Signs to watch for: split or missing mastic, gaps, damp patches inside or black mould on the reveal. If you notice one, it’s time to get the joint looked at.
The process
On the day, we look over the joints with you first, so there are no surprises. Surfaces next to the work are protected before we start. The work usually takes a few hours for a few frames, or a day or more for a whole house. For a place like Bunnahabhain, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First, we go round the frames with you and agree the list.
- The old mastic is cut out and scraped back to clean surfaces.
- Deep gaps get closed-cell backing rod to set the depth.
- The new sealant goes on in white, brown, anthracite grey, black or clear to suit.
- We tool each bead neatly and check every joint is closed.
Getting ready for the visit
- Mention any leaks or damp you’ve noticed
- Mention any sign-in or site rules at work premises
- Tell us about access, such as stairs, a lift or high-level joints
Get a quote
Asking for a quote is easy: let us know the job and the location and its rough size. Photos by email help us understand the job, and we’ll come back to you with a quote.
Related advice
DIY sealant or a professional job?
A DIY attempt does not rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.