Perth and Kinross · Scotland
Bathroom & kitchen resealing in Pitcairngreen, Perth and Kinross
Problem with your baths, showers and worktops in Pitcairngreen? We remove the old material, prepare the joints and seal them properly.
- Water getting behind the bath panel
- A joint torn by a bath that flexes
- Mouldy sealant that has gone black
About our bathroom resealing in Pitcairngreen
Showers work their sealant harder than baths. Trays, enclosures, screen profiles and wet room floors all need a flexible, waterproof seal. Each gets a bead of anti-fungal sanitary silicone, finished smooth so water drains away rather than collecting. We’re often asked to deal with smears of silicone across the tiles and a joint torn by a bath that flexes, on shower trays & enclosures, basins & vanity units and wet rooms.
In and around a place like Pitcairngreen, homes range from older stone-built properties to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
Your job is guaranteed for a year, as with all our work.
- Place
- Pitcairngreen (PH1)
- Region
- Perth and Kinross
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before work begins
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What we cannot put right
New sealant can’t fix everything, and we’d rather say so up front. It won’t solve:
- A bath or tray that moves because it is not properly supported
- Cracks in the tray itself rather than the joint
- Loose or hollow tiles, or failed tanking behind them
Not sure which it is? You can email us at info@mrmastic.co.uk and we will tell you honestly before you book.
Surfaces we seal
- Wet rooms
- Baths
- Sinks & splashbacks
- Kitchen worktops & upstands
- Basins & vanity units
- Shower trays & enclosures
Also near Pitcairngreen
Other services in Pitcairngreen
How to look after the new joints
No joint lasts for ever, but care makes a real difference. Our tips:
- Run the extractor fan during and after every shower
- Do not leave water standing on kitchen joints
- Stick to a soft cloth and a mild cleaner
- Do not let bottles sit on the bead
Clean the silicone with care: a mild bathroom cleaner and a soft cloth is enough. Scourers and blades can nick the surface, and a nicked bead lets mould in sooner.
Small signs come before a leak: lifting ends, gaps, dark shadows under the bead or a stain downstairs. Any of these means the joint needs attention.
Your questions about bathroom resealing in Pitcairngreen
Do you work for landlords with property near Perth station?
Yes, rental work is part of what we do. Just send an email to info@mrmastic.co.uk and tell us about the property, and we will give you a clear quote.
Is Pitcairngreen in your area for bathroom resealing?
Yes, Pitcairngreen is within the area we cover. Our work covers the whole of Scotland. Just send an email to info@mrmastic.co.uk with a few details of the job.
Will the old sealant be removed?
Yes, always, and completely. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
Can you work on commercial sites?
Yes. Commercial and hotel work is a large part of what we do. We can talk about working times when we quote.
Can new silicone go straight over the old?
No. New silicone won’t bond to old silicone, so it peels away and hides mould and water. We always take the old sealant out completely.
Can mouldy silicone be sorted out?
Yes. Mould inside the bead rarely cleans out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
Do you reseal kitchen worktops and sinks too?
Yes. We reseal worktop upstands, sinks and splashbacks, with a sealant suited to kitchens, colour-matched where it shows.
How long does a bath or shower reseal take?
One bath or shower is around two hours’ work, including cutting out the old sealant. A whole bathroom plus the kitchen may take most of the day.
What the job involves on each surface
Basins & vanity units
Vanity units have long, worktop-style joints against the wall. Water that gets behind can damage the unit, so the joint is sealed in one unbroken line.
Sinks & splashbacks
Splashbacks in glass, tile or acrylic meet the worktop in a long joint. We renew it in clear, white or a matched colour.
What happens on the day
Most of a good job is in the preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. In total, it generally takes two to three hours for a typical bath, depending on how much old sealant there is. In smaller Scottish places, parking is usually less of an issue than access and distance. Tell us how to find the property and how to reach the work.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- The joint is cleaned, degreased and treated for mould.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- We tool the bead to a neat finish and give you the cure time, generally around 24 hours.
Preparing for the visit
- Keep pets and children clear of the area while we work
- Tell us about any water getting in
- Tell us about access, such as stairs, a lift or high-level joints
Getting a quote
To get a quote, send an email to info@mrmastic.co.uk with the location and a short description of the problem. We will give you a clear quote before any work starts.
Related advice
Do you need bathroom resealing in Pitcairngreen?
Baths and trays move. An acrylic bath flexes under load, and a tray that is not fully bedded can rock. That movement works at the bead until it splits or peels away.
The most common problems we see are:
- A joint torn by a bath that flexes
- Water getting behind the bath panel
- Leaking joints on a shower screen
- A reseal done over the top of the old bead
If you let a flat or house near Perth station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Comparing quotes
- Whether they’re fully insured
- How the joint is cleaned and prepared
- Which sealant they’ll use, and why
- What happens if they find a problem under the old sealant
Bathrooms and kitchens in Pitcairngreen
Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black. In Scotland, private landlords have to meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies.
Managing a site like Bertha Park High School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Pitcairngreen is about 3 miles north-west of Perth, in Perth and Kinross. Across the PH1 area, we can carry out bathroom resealing at your property. Across Perth and Kinross, we cover 107 places, Pitcairngreen among them. Dundee is on our list too, around 21 miles away.
Jobs for bathroom resealing in PH1 is quoted and booked the same way as anywhere else. Whether your property is on Culloden House Court and Burnside Park or anywhere close by, our applicators can take on the job. Nearby, we also carry out bathroom resealing in Almondbank (1 mile south), Ruthvenfield (2 miles south-east), Huntingtower (2 miles south-east), Tibbermore (2 miles south) and Tulloch (2 miles south-east). We also work in nearby towns such as Perth (3 miles south-east), Blairgowrie and Rattray (13 miles north-east), Crieff (13 miles west), Auchterarder (12 miles south-west), Kinross (15 miles south) and Letham (3 miles south-east).
Local landmarks in Pitcairngreen
Pitcairngreen’s nearest station is Perth station, roughly 4 miles south-east of the centre. A little further out are Murray Royal Hospital (4.4 miles south-east) and Methven Castle (1.5 miles south-west). The countryside around Pitcairngreen includes Dupplin Lake and Mailer Hill.
Landlords, agents and businesses in Pitcairngreen
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
For anyone letting property in or around Pitcairngreen, several properties can go on one quote. Just tell us the addresses and what each one needs, and pictures by email help.
Should I try it myself first?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so tell us about it when you ask for a quote.