Kent · England
Calcott Bathroom Resealing
Baths, showers and worktops in Calcott need attention? We cut out the old, prepare the joints and apply the right sealant.
- Cracked, shrunken or lifting silicone
- Mouldy sealant that has gone black
- New sealant laid over old sealant that is now lifting
What we cannot put right
Some problems need a builder, plumber or other trade rather than us:
- Water getting in through the grout rather than the sealant
- A leaking waste, trap or valve
- Cracks in the tray itself rather than the joint
If you are not sure, just phone 0345 464 0079 or drop us an email and we will give you a straight answer.
Surfaces we seal
- Sinks & splashbacks
- Basins & vanity units
- Shower trays & enclosures
- Wet rooms
- Kitchen worktops & upstands
- Baths
Bathroom resealing in Calcott, done properly
We fill the bath before sealing it. A full bath sits slightly lower than an empty one, so the new joint is not pulled apart the first time it’s used. Quick jobs often leave it out, and it makes a real difference. If you have lumpy, uneven sealant from a DIY attempt and a reseal done over the top of the old bead, we can put it right.
Somewhere as small as Calcott, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
A one-year guarantee comes as standard.
- Place
- Calcott (CT3)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Quote
- A clear price before work begins
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Calcott: your questions answered
Do you cover smaller places like Calcott?
Yes, Calcott is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you work for landlords with property near Sturry station?
Yes. We work for landlords and letting agents as well as householders, and several properties can be quoted together. Just ring 0345 464 0079 or send us an email with the address and what needs doing, and we’ll give you a clear quote.
Are you fully insured?
Yes, we are fully insured.
How do I get a quote for bathroom resealing in Calcott?
Size, access and the old material all affect the cost. Call for a quick quote and we will talk you through it.
Can I do it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it doesn’t work out, we can redo it.
Can new silicone go straight over the old?
No. A bead laid over old silicone soon starts to come away, because silicone doesn’t bond to silicone. We remove the old bead completely before resealing.
Do you guarantee your resealing?
Yes. We give a 12-month guarantee on every job, and we’re ARBOMaster approved applicators.
Can mouldy silicone be sorted out?
Yes, by replacing the sealant. Sprays can fade the marks, but cutting it out and resealing is what lasts. Good ventilation helps keep it away.
How the job changes by surface
Shower trays & enclosures
If a tray moves underfoot, new silicone won’t last. We check for movement before we reseal, and tell you if it needs re-bedding first.
Kitchen worktops & upstands
Worktop joints get wet and wiped every day. We seal them in a colour that suits the worktop.
How to look after the new joints
To keep the joints looking good and working properly:
- Keep bottles off the sealant line
- Never pick at the silicone with a blade
- Keep an eye on the corners, where splits start
- Use gentle cleaners on the silicone
Clean the silicone with care: warm soapy water and a soft cloth do the job. Scourers and blades can nick the surface, because a damaged bead gives mould a foothold.
A split bead lets water through every time the bath or shower is used. Over time that water reaches floors, walls and ceilings. Resealing early stops it.
Bathroom resealing in Calcott: local notes
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Sturry station? Then a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. Schools such as Sturry Church of England Primary School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Calcott is about 3 miles south of Herne Bay, in Kent. Whether you’re in the middle of Calcott or further out, we cover bathroom resealing for every kind of property. 922 places in Kent are on our list, large and small. We also work in Chelmsford, around 40 miles away.
Every address in CT3 is covered for bathroom resealing, from the main roads to the quietest streets. Nearby, we also carry out bathroom resealing in Hicks Forstal (1 mile north-east), Broad Oak (1 mile south), Sturry (1 mile south), Herne Common (1 mile north) and Westbere (2 miles south-east). Within a short drive, we also cover Canterbury (3 miles south-west), Margate (12 miles east), Dover (15 miles south-east), Ramsgate (13 miles east), Broadstairs (14 miles east) and Whitstable (4 miles north-west).
What’s near Calcott
In Calcott, that means homes and buildings near Frank Montgomery School, Spires Academy and Curtis Wood, among other places. For rail, the closest station is Sturry station, roughly 1.5 miles south of the centre. Other landmarks nearby include Canterbury Castle (3.8 miles south-west) and St Martins Hospital (3.2 miles south). Open spaces near Calcott include West Blean and Thornden Woods.
DIY sealant or a professional job?
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Quotes for bathroom resealing in Calcott
The quote reflects the job in front of us. We look at:
- Any mould that needs treating
- How many rooms, windows or areas are involved
- Which sealant suits the joint
- The number and length of the joints
We do not show prices on the website, because each job is priced on what it involves. Call for a quick quote.
Asking for a quote
Before you ask for a quote, have a think about:
- Whether it has been sealed before
- Photos by email, if that’s easy
- How we’d reach the joints
- The problem you’ve noticed
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. Whenever you are ready, call 0345 464 0079 or drop us an email.
The process
You do not need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the work takes two to three hours for a typical bath, depending on how much old sealant there is in most cases. Somewhere like Calcott needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We cover the area around the joints we’re working on.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
Preparing for the visit
- Let us know about stairs, lifts or work at height
- Clear items away from the joints we are working on
- Plan for the work area to be out of bounds to pets and children
How to get a quote
Every job is quoted individually, so the first step is telling us about yours. Just call 0345 464 0079 or send us an email with the details, and pictures are welcome.
Advice
Leave it or put it right?
Most of the work in a good reseal happens before any silicone goes on: cutting out every trace of the old bead, cleaning, treating mould and letting the joint dry. Skip those steps and even the best silicone fails early. Older cottages and farmhouses around Calcott can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
The cost reflects the work involved, not a rough estimate. That’s why we ask about the job first and give you a clear quote before we start.
What you get with us
- White, clear, grey or coloured to suit, where the product allows
- Neat joints and a tidy finish
- Old sealant always removed completely
- One-year guarantee on every job
See our cost guide or what customers say.