Kent · England

Bathroom & kitchen resealing in Herne Common, Kent

Bath, shower, basin, wet room, worktop and sink resealing for homeowners, landlords and businesses in Herne Common. ARBOMaster approved applicators, fully insured, with a one-year guarantee.

  • Water getting behind the bath panel
  • Mouldy sealant that has gone black
  • Water getting behind the kitchen upstand

Need bathroom resealing in Herne Common?

About our bathroom resealing in Herne Common

A shower joint gets soaked every day. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. Each gets a bead of anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. We are often asked to deal with smears of silicone across the tiles and splits where the tray meets the wall, across basins & vanity units, baths and kitchen worktops & upstands.

Somewhere as small as Herne Common, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.

You’re covered for a year from the day we finish. If anything isn’t right with it, call 0345 464 0079 or drop us an email.

Sealant gun being used along the bath-to-tile joint in a beige tiled bathroom
Place
Herne Common (CT6)
Wider area
Kent
Cover
One year on every job
Quote
Quoted before any work starts
Call
0345 464 0079
Last updated
26 October 2026

Signs you need bathroom resealing in Herne Common

Baths and trays move. An acrylic bath flexes under load, and a tray that isn’t fully bedded can rock. Over time the joint tears or pulls away from the tile.

Common reasons people contact us are:

  • Black mould in the silicone that will not clean off
  • Gaps where the bath or tray has moved
  • Two layers of silicone, both failing
  • Sealant that has split, shrunk or peeled away

If you look after a building such as Herne Church of England Infant School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.

Comparing quotes

  • What insurance they hold
  • How much experience the applicator has
  • Whether they seal over old material or remove it
  • What happens if the job turns out different

How to choose a mastic man

What happens on the day

Every visit runs the same way: we look at the joints together, mask and protect the surrounding surfaces, carry out the job and clear up. It usually takes half a day or less for one room, longer when the kitchen is included. For a village or hamlet like Herne Common, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.

  1. Protection goes down around the bath, shower or worktop.
  2. Old sealant is sliced away and the residue removed.
  3. We treat any mould and let the joint dry properly.
  4. Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
  5. The joint is finished neatly and we explain when it can get wet.

Getting ready for the visit

  • Where the joints are inside, avoid wetting them before we arrive
  • Mention any tricky access
  • Tell us about any previous sealing or DIY attempts

Ask for a quote

There’s no standard price list. Instead, we give you a clear price for your job. To get started, phone 0345 464 0079 or email us.

Get a price

Advice

What sealant work cannot fix

In fairness, there are a few things sealant won’t fix:

  • A tray that rocks until it’s re-bedded
  • Cracks in the tray itself rather than the joint
  • Loose or hollow tiles, or failed tanking behind them

Not sure which it is? You can phone 0345 464 0079 or drop us an email and we’ll tell you honestly before you book.

Where we work in Herne Common

  • Baths
  • Kitchen worktops & upstands
  • Basins & vanity units
  • Sinks & splashbacks
  • Wet rooms
  • Shower trays & enclosures

What affects the cost of bathroom resealing

Call for a quick quote. The main things that affect it are:

  • How many rooms, windows or areas are involved
  • Whether the work is at height
  • Mould in or behind the old joints
  • The old material and how stubborn it is

Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference.

Helping us quote

When you contact us, it’s useful to know:

  • Where the job is, and your postcode
  • The type of property
  • Access, such as stairs, a lift or height
  • The problem you’ve noticed

If you’re in Herne Common and need bathroom resealing, ring 0345 464 0079 or send us an email. Tell us what the problem is and where, and we’ll agree the price before any work begins.

Leave it or put it right?

Running new silicone over the old joint can look tidy for a few weeks, but it will not bond. It lifts, traps water and grows mould behind it. Where a wall is exposed, as many are in small places like Herne Common, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.

What you pay reflects the work, not guesswork. That is why we ask about the job first and agree the price before starting.

Why choose Mr Mastic in Herne Common

  • Sealant colour chosen to suit
  • White, clear, grey or coloured to suit, where the product allows
  • Sanitary silicone with an anti-fungal additive in wet areas
  • Rated 4.9 stars on Google

Read what affects the cost and customer reviews.

Common questions in Herne Common

Can you help a landlord with a rental near Herne Bay station?

Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can phone 0345 464 0079 or drop us an email with the details for a clear quote.

Is Herne Common in your area for bathroom resealing?

Yes, Herne Common is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or drop us an email and tell us what needs doing.

Do you reseal kitchen worktops and sinks too?

Yes, often alongside a bathroom. Where it’s needed by the sink, we use a food-safe sealant.

Can you quote for more than one area?

Yes. Just list everything you need.

Can you work on commercial sites?

Yes. We have worked for hotels, offices and other businesses.

When can I use the bath or shower again?

Silicone is touch-dry quite quickly, but it takes longer to cure. Leave it around 24 hours before it gets wet, or follow the cure time we give you.

Can new silicone go straight over the old?

No. It’s a common reason for reseals failing. The old joint is stripped, cleaned and resealed from scratch.

Which products do you use?

Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we’ll explain our choice.

Should I try it myself first?

The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.

Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.

Keeping the joints in good condition

To keep the joints looking good and working properly:

  • Wait for the cure time we give you
  • Dry worktop joints after washing up
  • Keep bottles off the sealant line
  • Check the joints every few months for splits or lifting

Mould needs damp, so keep the room aired. Use the fan, or open a window, while you bathe and for a while afterwards, so the silicone gets a chance to dry.

Worktop joints fail quietly. Splashes run behind the back edge and soak into the worktop, where it can make the board swell. A reseal in time can save the worktop.

Herne Common homes and their sealant

Herne Common is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

For an older house near a landmark such as Church of St Martin, timber floors under older bathrooms flex, so joints need a sealant that moves with them. Letting a property close to Herne Bay station? Then a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.

Herne Common is about 2 miles south of Herne Bay, in Kent. Jobs in Herne Common get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Across Kent, we cover 922 places, Herne Common among them. We also work in Chelmsford, around 39 miles away.

Postcode districts we cover here for bathroom resealing: CT6. Whether your property is on Canterbury Road, Nightingale Road and Falcon Close or a nearby road, our applicators can take on the job. Other places close to Herne Common include Bullockstone (1 mile north-west), Herne (1 mile north-east), Hicks Forstal (1 mile south), Eddington (1 mile north) and Hunters Forstal (1 mile north-east). Within a short drive, we also cover Canterbury (5 miles south), Margate (12 miles east), Ramsgate (12 miles east), Broadstairs (13 miles east), Whitstable (4 miles west) and Deal (15 miles south-east).

Local landmarks in Herne Common

We work in homes and buildings around Curtis Wood and Herne Bay High School, among other places. For rail, the closest station is Herne Bay station, about 1.4 miles north. Other landmarks nearby include Whitstable and Tankerton Hospital (3.4 miles west) and Tankerton Castle (4 miles west). For a walk, there’s West Blean and Thornden Woods.

Map of Herne Common © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job