Kent · England

New Build Mastic in Herne Common

Plot mastic for developers and snagging failed sealant in new homes for Herne Common, backed by a one-year guarantee. Ask us for a quote.

  • Gaps opening as the house dries out and settles
  • Sealant that never bonded to the surface
  • Worktop and upstand sealant coming away

Trusted new build mastic in Herne Common

Surface by surface

Kitchens

Worktops in new homes can move slightly as the house dries, opening gaps behind the upstand. We reseal them with a flexible sealant.

Skirting and floors

As timber and screed dry, skirting and floors shift. Caulk cracks; a flexible sealant moves with it in a colour to suit.

New build mastic in Herne Common

Across Herne Common, we work for both new-home owners and the builders handing those homes over. One shower or a whole phase of plots, the method does not change: cut out, clean, prime where needed and reseal neatly. We work on show homes, kitchens and windows & doors, and the jobs we see most are beads laid onto grit and dust from the build and gaps behind new kitchen upstands.

For a small place like Herne Common, the journey and access are planned in advance, and once on site, the job is the same as anywhere.

Whatever the size of the job, you get the same 12-month guarantee in Herne Common and across Kent.

Location
Herne Common (CT6)
Region
Kent
Guarantee
A year, on every job
Price
Quoted before any work starts
Call
0345 464 0079
Last updated
26 October 2026
Sealant gun close-up on a shower enclosure wall joint

Questions from Herne Common

Is Herne Common in your area for new build mastic?

Yes, Herne Common is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or send us an email with a few details of the job, and we will give you a clear quote.

Is Herne Common within the area you cover?

Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.

What information do you need?

Let us know what needs doing and where, plus pictures if you have them. We will ask anything else we need to know.

Should I try DIY first?

For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.

Do you work for developers?

Yes. We seal plots to the developer’s programme. Tell us the plots and the joints involved for a clear quote.

Who should fix failed sealant in a new build?

Report it to the builder first while you’re covered. If it is not resolved, we’ll cut it out and reseal it.

Can you work from my snagging list?

Yes. Photos of each sealant item help us quote. If something is not sealant, we will say so.

Why has my new-build shower seal failed already?

A new house dries and settles for a year or two, and sealant is often rushed onto dusty, unprimed surfaces. Either can make it fail early.

Joints and finishes in Herne Common homes

Herne Common is close to the coast. New homes near the sea put their outside mastic to work from day one, so it’s worth checking at snagging. London and the South East are among the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.

For new homes near Herne Bay station, it’s worth checking the sealant early, while snags are still fresh.

Herne Common is about 2 miles south of Herne Bay, in Kent. For new build mastic in and around Herne Common, it’s easy to get a quote: please phone 0345 464 0079 or email us. We cover Kent from our Crawley base. Our area takes in 922 places across Kent, large and small. Chelmsford is on our list too, around 39 miles away.

Every address in CT6 is within our area for new build mastic, from the main roads to the quietest streets. We cover properties on Canterbury Road, Nightingale Road and Falcon Close. Nearby, we also carry out new build mastic in Bullockstone (1 mile north-west), Herne (1 mile north-east), Hicks Forstal (1 mile south), Eddington (1 mile north) and Hunters Forstal (1 mile north-east). Larger places within reach include Canterbury (5 miles south), Margate (12 miles east), Ramsgate (12 miles east), Broadstairs (13 miles east), Whitstable (4 miles west) and Deal (15 miles south-east).

What’s near Herne Common

Around Herne Common, our work takes us to homes and buildings near Curtis Wood and Herne Bay High School, among other places. The closest station to Herne Common is Herne Bay station, about 1.4 miles north. A little further out are Whitstable and Tankerton Hospital (3.4 miles west) and Tankerton Castle (4 miles west). Not far away are West Blean and Thornden Woods.

Map of Herne Common © OpenStreetMap contributors

Keeping the joints in good condition

How long the joints last depends on use and care. Here’s what we suggest:

  • Keep photos and emails about snagging items
  • Follow the cure time we give you
  • Raise failed sealant with the developer while you’re covered
  • Check bath and shower seals every few months as the house settles

Clean the sealant with a mild detergent and a soft cloth. Avoid abrasive pads and strong solvents as they wear the bead.

Leave a failed new-build seal and water can reach the floor and the ceiling below. Early resealing keeps the job small and protects the rest of the house.

Landlord and commercial work in Herne Common

Landlords and agents in Herne Common can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for before the next move-in.

Failed sealant is one of the commonest items on a check-out report. Several properties can go on one quote.

How the visit works

Once we’re on site, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes anything from a few hours to several days, depending on the number of plots. In a small place like Herne Common, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. We go through the snagging list or plot schedule and agree the joints to do.
  2. The old bead comes out in full, with no layer left behind.
  3. Each joint is cleaned of dust and grit, then primed if required.
  4. New sealant suited to each joint is applied and tooled neatly.
  5. We check every joint and tell you how long each needs to cure.

How to prepare

  • Tell us about access, such as stairs, a lift or high-level joints
  • Mention any leaks or damp you’ve noticed
  • Move anything stored near the joints

How to get a quote

For new build mastic in Herne Common, call 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and you will get a clear quote before we start.

Get a quick quote

Read more

When something else is needed

Honest advice matters more to us than a booking, so here’s what sealant cannot fix:

  • Plumbing faults behind the sealant
  • Settlement cracks that need a surveyor
  • Disputes or warranty claims with your builder

If you are not sure, just call 0345 464 0079 or drop us an email and we will give you a straight answer.

Where we work in Herne Common

  • Kitchens
  • Show homes
  • Skirting & floors
  • Bathrooms & en suites
  • Windows & doors
  • Plot handovers

What affects the quote in Herne Common

The price is agreed before any work begins. It takes into account:

  • Access and height
  • The type of sealant required
  • Working hours on commercial sites
  • How much old sealant there is and how hard it is to remove

No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part.

What to tell us for a quote

Before you ask for a quote, have a think about:

  • How many joints, rooms or windows are involved
  • What the problem is, such as mould, gaps, leaks or cracking
  • Where the property is
  • A few photos by email, if you can

It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. Whenever you are ready, ring 0345 464 0079 or send us an email.

When to call us in Herne Common

If plaster or screed was still damp when it was sealed, the bond suffers. On a busy site, joints aren’t always given time to dry before the sealant goes on.

It’s worth asking for a quote if you see:

  • Skirting joints opening in the first winter
  • Sealant applied over dusty or wet surfaces
  • Second-fix sealing on new plots
  • Untidy sealant flagged on a snagging list

Around Herne Common, as everywhere, new build mastic is only as good as the preparation behind it.

Questions to ask before you book

  • Whether all the old sealant comes out first
  • What happens if the job turns out different
  • Whether the sealant suits the joint
  • What guarantee comes with the work

Our hiring checklist

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job