Kent · England
Bathroom & kitchen resealing in Margate, Kent
Baths, showers and worktops in Margate need attention? We cut out the old, prepare the joints and apply the right sealant.
- Failed sealant on the screen profile
- Lumpy, uneven sealant from a DIY attempt
- Water getting behind the bath panel
How the visit works
When we arrive, we start by going over the job with you, so you know exactly what we are doing. Surfaces next to the work are protected before any work starts. The work usually takes two to three hours for a typical bath, depending on how much old sealant there is. Parking in a town like Margate is generally straightforward, but tell us if there’s a driveway or any restrictions, and let us know if the work is upstairs, in a flat or up high outside.
- We cover the area around the joints we are working on.
- Old sealant is sliced away and the residue removed.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
Before we arrive
- Move anything stored near the joints
- Plan for the work area to be out of bounds to pets and children
- For business premises, tell us about site rules or sign-in
Get a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job. When it suits you, phone 0345 464 0079 or send us an email.
Related advice
Bathroom resealing in Margate
With over 20 years in the trade, we reseal baths, showers and kitchens in homes across Margate. We are ARBOMaster approved and fully insured, and every job carries our 12-month guarantee. If you are dealing with sealant that has split, shrunk or peeled away and a joint torn by a bath that flexes, we can put it right, whatever the surface.
Around Margate, it’s mostly busy family bathrooms and kitchens, where sealant and grout take a lot of daily wear. Black mould along the bath, a lifting bead by the sink or crumbling grout in the shower are the usual signs.
Big or small, it’s backed by our one-year guarantee in Margate and across Kent.
What sealant work can’t fix
We’d rather tell you now than do work that will not last, so these are the limits:
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- A tray that rocks until it’s re-bedded
- Water getting in through the grout rather than the sealant
If in doubt, ring 0345 464 0079 or email us and we’ll say what we think.
Joints and surfaces we work on
- Sinks & splashbacks
- Basins & vanity units
- Wet rooms
- Kitchen worktops & upstands
- Baths
- Shower trays & enclosures
More services for Margate
Different surfaces, different methods
Baths
Acrylic baths flex the most, while steel and cast iron baths move less but still settle when full. Loading the bath with water before sealing allows for it.
Shower trays & enclosures
The vertical joint where a screen profile meets the wall is a common leak point. It’s resealed along with the tray joints, sealing the side the enclosure’s instructions call for.
Signs you need bathroom resealing in Margate
Older sealant shrinks and hardens. Along worktops it tends to pull back from the wall, leaving a thin gap where water and food collect. Heat from the hob and strong sprays speed it along.
The most common problems we see are:
- Cracked, shrunken or lifting silicone
- Water escaping at the shower enclosure
- Lumpy, uneven sealant from a DIY attempt
- Mouldy sealant that has gone black
If you let a flat or house near Margate station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Before booking anyone
- Which colour the sealant will be
- Who turns up on the day
- How long the guarantee is
- Whether they seal over old material or remove it
Landlords, agents and businesses in Margate
For anyone letting property in or around Margate, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs, and pictures by email help.
Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll give you a quote.
Bathroom resealing in Margate: local notes
Margate is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. There are hotels and other places to stay in and around Margate. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room.
Homes close to Parish Church of St John the Baptist include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. For site and facilities teams at buildings such as Salmestone Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Margate is in Kent. We carry out bathroom resealing for homeowners, landlords and businesses in Margate and nearby, as part of our work across Kent. Margate is one of 922 places in Kent where we work for bathroom resealing. Chelmsford is on our list too, around 46 miles away.
Our applicators cover all of the CT9, CT7, CT8 and CT10 postcode area for bathroom resealing. Local streets include Yoakley Square, Church Road and High Street. You’ll find Margate on the A28 and A254, which makes it straightforward to reach with everything needed for bathroom resealing. Other places close to Margate include Westwood (1 mile south), Westbrook (1 mile west), Garlinge (1 mile west), Flete (1 mile south-west) and Haine (2 miles south). Further out, we also cover Canterbury (15 miles south-west), Ramsgate (3 miles south), Whitstable (15 miles west), Deal (11 miles south), Herne Bay (11 miles west) and Walmer (12 miles south). Margate is one of the larger places we cover in Kent.
Local landmarks in Margate
Locally, jobs take us to homes and businesses close to Hartsdown Academy and Secret Spices pub. The closest station to Margate is Margate station, roughly 0.6 miles north-west of the centre. Well-known places in the area include Westwood Cross (1.6 miles south) and Queen Elizabeth the Queen Mother Hospital (less than half a mile south-east). Green spaces nearby include Sandwich and Pegwell Bay.
Should I try it myself first?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Questions from Margate
Is Margate in your area for bathroom resealing?
Yes. We work across London and the South East, and Margate is part of that. Just ring 0345 464 0079 or email us with a few details of the job, and we’ll give you a clear quote.
Do you work for landlords with property near Margate station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or email us and tell us about the property, and we will give you a clear price.
When can I use the bath or shower again?
Around 24 hours is typical, and we confirm the time for the product used. Using it sooner can damage the bead.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. Once we’ve agreed the job, you don’t need to watch us work.
Should I try DIY first?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
Do you reseal kitchen worktops and sinks too?
Yes. We reseal worktop upstands, sinks and splashbacks, with a sealant suited to kitchens, colour-matched where it shows.
Can you do several jobs on one visit?
Yes. More than one area can go on one quote.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
Why act early in Margate
Most of the work in a good reseal happens before any silicone goes on: cutting out every trace of the old bead, cleaning, treating mould and letting the joint dry. Without that preparation, the new bead won’t last. Draughts from a gap round a frame, damp under a sill or water behind a bath panel all start small, and early is when they’re cheapest and quickest to sort.
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. You will know the price before we begin.
Why book with us
- 4.9 on Google from 180+ five-star reviews
- Old sealant always removed completely
- Approved under the ARBOMaster scheme
- Anti-fungal silicone where joints get wet
See what affects the cost and what customers say.