Kent · England
Bathroom Resealing in Sturry
Baths, showers and worktops in Sturry need attention? We remove the old material, prepare the joints and seal them properly, with a 12-month guarantee.
- A messy, uneven bead from a previous reseal
- Water escaping at the shower enclosure
- Leaks into the floor or ceiling below
Do you need bathroom resealing in Sturry?
Sealing over old silicone is one of the commonest mistakes we find. New silicone will not bond to old silicone, so it peels, leaks and hides mould behind it.
Common reasons people contact us are:
- Water getting behind the kitchen upstand
- A joint torn by a bath that flexes
- Lumpy, uneven sealant from a DIY attempt
- A bead that has pulled away from the tiles
For site and facilities teams at buildings such as Sturry Church of England Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Before you book anyone
- What insurance they hold
- Is the old sealant removed completely?
- Who turns up on the day
- Which sealant they’ll use, and why
How we handle bathroom resealing in Sturry
Mr Mastic has more than 20 years’ experience of sealant work, and our applicators reseal bathrooms and kitchens across Sturry. We’re fully insured ARBOMaster approved applicators, and every job carries our 12-month guarantee. If you are dealing with black spots spreading through the bead and a messy, uneven bead from a previous reseal, we can put it right, whatever the surface.
Even in a smaller place like Sturry, bathrooms and kitchens see heavy daily use. Whether it’s a cottage bathroom or a newer en suite, the approach is the same: all the old material out, the joint cleaned and dried, then new sealant or grout.
All our work is covered by a 12-month guarantee.
- Location
- Sturry (CT2)
- Wider area
- Kent
- Cover
- A year, on every job
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Your questions about bathroom resealing in Sturry
Is Sturry within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you do bathroom resealing in Sturry?
Yes. We work across London and the South East, and Sturry is part of that. You can phone 0345 464 0079 or send us an email and let us know what needs doing.
Can you quote for more than one area?
Yes. More than one area can be quoted together.
What do you need from me for a quote?
A short description and the location, with photos by email if possible. We will ask anything else we need to know.
Where is Mr Mastic based?
Our base is in Crawley, and we cover South East England, London and all of Scotland.
What does bathroom resealing cost?
Every job is different, so each one gets its own quote. For a quick quote, call 0345 464 0079 or email us with a short description of the job.
Can I choose the colour of the sealant?
White and clear are the most common choices, and other colours are available to suit tiles, trays and worktops. Let us know your preference when you ask for a quote.
Do you do kitchens as well as bathrooms?
Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then a colour-matched bead is laid.
What sealant work cannot fix
We won’t take on work that will not last, so here’s what sealant can’t put right:
- A tray that rocks until it’s re-bedded
- Water coming from the plumbing rather than the joint
- Cracks in the tray itself rather than the joint
Not sure which it is? You can phone 0345 464 0079 or email us and we’ll tell you honestly before you book.
Joints and surfaces we work on
- Basins & vanity units
- Wet rooms
- Sinks & splashbacks
- Baths
- Kitchen worktops & upstands
- Shower trays & enclosures
How it works
When we get to you, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. Most jobs then take half a day or less for one room, longer when the kitchen is included. Parking around Sturry is generally easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- We protect the area and cut out all of the old sealant.
- We clean and degrease the joint and treat any mould.
- We let it dry fully and fill the bath with water before sealing.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We tidy up and give you the cure time, normally around 24 hours.
How to prepare
- Tell us about access, such as stairs, a lift or high-level joints
- Keep pets and children clear of the area while we work
- Mention any sign-in or site rules at work premises
Ask for a quote
Getting a quote is simple: let us know what needs doing and where, and roughly how big it is. Photos by email help us understand the job.
Related advice
What happens if it’s left?
Dealing with sealant early is a short job: it takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Left until water gets through, the job can grow to lifting panels, drying out and decorating. Around Sturry, water from a failed joint in an older home can soak into timber and plaster, which is far harder to put right than the sealant itself.
The cost reflects the work involved, not guesswork. That is why we ask a few questions first and give you a clear price before work begins.
Why book with us
- Tidy, careful work
- White, clear, grey or coloured to suit, where the product allows
- One-year guarantee on every job
- Homes, businesses and hotels
Landlords, agents and businesses in Sturry
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Other services in Sturry
How the job changes by surface
Baths
Acrylic baths give a little under load, and even steel and cast iron baths settle slightly when full. Loading the bath with water before sealing allows for it.
Sinks & splashbacks
Splashbacks in glass, tile or acrylic meet the worktop in a long joint. It’s resealed in white, clear or a colour to suit.
Bathroom resealing in Sturry: local notes
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around St Nicholas' Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them. Rented homes near Sturry station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Sturry is about 3 miles north-east of Canterbury, in Kent. If you need bathroom resealing in Sturry, it’s easy to get a quote: please call 0345 464 0079 or drop us an email. We’re based in Crawley and cover Kent, Sturry included. Sturry is one of 922 towns and villages in Kent where we work for bathroom resealing. Our Chelmsford page covers work nearby (41 miles or so).
Here we cover the CT2 postcode area for bathroom resealing. We cover properties on High Street, Park View and Link Road. Other places close to Sturry include Broad Oak (1 mile west), Westbere (1 mile east), Calcott (1 mile north), Hersden (2 miles east) and Hicks Forstal (2 miles north). Further out, we also cover Canterbury (3 miles south-west), Margate (12 miles north-east), Dover (14 miles south-east), Folkestone (15 miles south), Ramsgate (13 miles east) and Broadstairs (14 miles east).
Around Sturry
Around Sturry, our work takes us to homes and buildings near Frank Montgomery School, Chequer's Wood and Old Park and The Swan Inn, among other places. There’s a railway station in Sturry itself: Sturry station. Well-known places in the area include Canterbury Roman Museum (2.6 miles south-west) and St Martins Hospital (2.1 miles south). For a walk, there’s West Blean and Thornden Woods.
Looking after it afterwards
Simple care keeps the joints in good condition. Our advice:
- Do not leave water standing on kitchen joints
- Look for lifting corners and small gaps now and then
- Avoid abrasive pads on the sealant
- Let new sealant cure fully before it gets wet
Clean the silicone with care: a mild bathroom cleaner and a soft cloth is enough. Avoid scouring pads and anything sharp, because a damaged bead gives mould a foothold.
Do not wait for a refit to deal with failed sealant. Sealant is a maintenance item, like the paint on a window frame, and replacing it when it fails protects the rest of the room.