Kent · England
Fire Rated Sealant in Calcott
Problem with your fire-stopping gaps in Calcott? We cut out the old, prepare the joints and apply the right sealant.
- Gaps left after a refit or conversion
- Standard silicone or caulk in a fire-stopping gap
- Linear gaps at the head of walls
Workplaces and buildings in Calcott
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
For landlords with property near Sturry station, any gap left by new services in shared walls should be closed with a fire-rated product. For site and facilities teams at buildings such as Sturry Church of England Primary School, service openings in fire-resisting walls need checking after any refurbishment.
Calcott is about 3 miles south of Herne Bay, in Kent. Homes, rented property, offices and hotels in Calcott is covered for fire rated sealant. Every job comes with our 12-month guarantee. We cover 922 towns and villages across Kent, from the larger towns to small villages. You can also see our page for Chelmsford, roughly 40 miles from Calcott.
Postcode districts we cover here for fire rated sealant: CT3. Other places close to Calcott include Hicks Forstal (1 mile north-east), Broad Oak (1 mile south), Sturry (1 mile south), Herne Common (1 mile north) and Westbere (2 miles south-east). Further out, we also cover Canterbury (3 miles south-west), Margate (12 miles east), Dover (15 miles south-east), Ramsgate (13 miles east), Broadstairs (14 miles east) and Whitstable (4 miles north-west).
Local landmarks in Calcott
We work in homes and buildings around Frank Montgomery School, Spires Academy and Curtis Wood, among other places. Calcott’s nearest station is Sturry station, roughly 1.5 miles south of the centre. Other landmarks nearby include Canterbury Castle (3.8 miles south-west) and St Martins Hospital (3.2 miles south). For a walk, there’s West Blean and Thornden Woods.
Fire rated sealant in Calcott
A fire seal relies on being installed the way it was tested: the right depth, the right backing and the right product for the substrate. That detail is what we take care over. Common call-outs are for open joints along the top of partitions and gaps around pipes and cables through fire-resisting walls, on linear gaps, pipe & cable gaps and flats & HMOs.
Somewhere as small as Calcott, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. They all have washrooms, kitchens and service openings that need the right sealant.
All our work is covered by a 12-month guarantee, wherever you are in Kent.
- Where
- Calcott (CT3)
- Region
- Kent
- Guarantee
- A year, on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Calcott: your questions answered
Is Calcott within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you do fire rated sealant in Calcott?
Yes, Calcott is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or email us with a few details of the job.
Will you leave a mess?
Very little: the area around the joints is protected first, and we tidy up before we go.
Do you remove the old sealant?
Yes. We cut out all the old sealant and clean the joint.
Will you assess my building’s fire safety?
No, assessment isn’t something we do. When your assessor or designer has set out what’s needed, we’ll quote for the sealant work on it.
Which products do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
Can I choose the sealant colour?
In most cases you can choose. We’ll explain which colours are available.
Can you do several jobs on one visit?
Yes. More than one area can be quoted together.
Surface by surface
Masonry and concrete
For masonry and concrete, we use a product tested in that substrate. We clean out dust and debris before sealing so the sealant bonds.
Door frames
The gap between a door frame and the wall around it needs sealing as well as the door itself. We seal that gap with a fire-rated sealant suited to the frame and wall.
Landlords, agents and businesses in Calcott
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.
For anyone letting property in or around Calcott, several properties can be quoted together. Send us the addresses and the work at each.
DIY sealant or a professional job?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Why it’s worth doing now in Calcott
Waiting for the next refit can leave a gap open for years. Sealing the gap now is a contained job on its own. Where a wall is exposed, as many are in small places like Calcott, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
What you pay reflects the work, not guesswork. That is why we ask about the job first.
Why us?
- Rated 4.9 stars on Google
- Tidy, careful work
- Fully insured
- Trusted Arbo and Everbuild sealants
See our cost guide and our reviews.
Keeping the joints in good condition
A little care helps the new joints last. Our advice:
- Flag any open gap you spot round a pipe or cable
- Plan fire stopping into any work that goes through walls or floors
- Never patch a fire seal with standard sealant
- Check risers, ceiling voids and cupboards during building checks
Keep the record we give you with the building’s fire safety documents. It saves time at the next inspection or assessment.
When you plan work that goes through walls or ceilings, plan the fire stopping too. Doing it at the time avoids leaving gaps behind.
Nearby places to Calcott
Also in Calcott
What we can’t put right
A few problems are outside what sealant work can do:
- Deciding what fire stopping a building needs
- Doors that aren’t fire doors in the first place
- Large holes that need a different fire-stopping system
If you are not sure, just ring 0345 464 0079 or email us and we will give you a straight answer.
Surfaces we seal
- Pipe & cable gaps
- Service penetrations
- Linear gaps
- Flats & HMOs
- Plasterboard & masonry
- Door frames
How it works
Once we are on site, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. Most jobs then take anything from a few hours to several days, depending on how many gaps there are. Somewhere as small as Calcott, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used.
How to prepare
- Let us know if you’ve seen damp or leaks
- For indoor joints, keep the area dry beforehand if you can
- Move anything stored near the joints
Getting a quote
For a quick quote, get us on the phone, or email us if that’s easier. Tell us about the joints that need doing and we will explain what’s involved.