Kent · England
Ramsgate Fire Rated Sealant
Specialist fire rated sealant for Ramsgate: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Joints picked up in a fire-stopping survey
- Gaps filled with a product that isn’t fire-rated
- New service routes left unsealed after building work
How we handle fire rated sealant in Ramsgate
We can work through a building room by room or floor by floor. It gives you a list to keep with the building’s fire safety documents. Common call-outs are for gaps filled with a product that isn’t fire-rated and gaps around pipes and cables through fire-resisting walls, on door frames, flats & HMOs and service penetrations.
Shared washrooms take far more use than a home bathroom, and their sealant shows it, and fire-rated joints need restoring whenever new services are run through a wall. For a building in Ramsgate, we plan timings around how it’s used.
We stand behind the work with a one-year guarantee, so you’re covered after we have gone.
- Place
- Ramsgate (CT11, CT12, CT10)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Looking after it afterwards
A little care helps the new joints last. Our advice:
- Allow for resealing whenever new services are run
- Ask every contractor to reseal any fire stopping they disturb
- Ask which product was used before you paint
- Never patch a fire seal with standard sealant
Do not drill through or remove a fire seal without putting it back properly. New services through a sealed wall should include fire stopping in the plan.
An open gap isn’t only a fire issue: noise, draughts and even pests can come through too. Dealing with them early helps with all of these.
What affects the cost of fire rated sealant
Your quote is based on your job. We take into account:
- The type of sealant required
- Access and height
- Working hours on commercial sites
- Whether there’s mould to deal with
What you pay reflects the work, not guesswork. That’s why we ask about the job first and agree the price before starting.
What we need to know
To make quoting easier, please include:
- Pictures of the joints, sent by email
- Any access issues, like height or stairs
- Whether it’s a home or a business
- Where the job is, and your postcode
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we will talk you through the work.
Places near Ramsgate
Other services in Ramsgate
What fire rated sealant looks like in Ramsgate
For seaside hotels, guest houses and holiday lets around Ramsgate, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details.
For buildings such as St. Luke's Church, service openings in its walls need the right fire-rated sealant, as in any building. For landlords with property near Ramsgate station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Ramsgate is in Kent. Across the CT11 area, our applicators can take on fire rated sealant. Our Kent coverage runs to 922 places, Ramsgate among them. There’s also a page for Chelmsford, about 48 miles away.
Jobs for fire rated sealant in CT11, CT12 and CT10 is quoted and booked the same way as anywhere else. We cover properties on High Street, Church Road and High Street St Lawrence and the roads around them. You’ll find Ramsgate on the A254 and A255, which makes it straightforward to reach. Nearby, we also carry out fire rated sealant in St Lawrence (1 mile west), Northwood (1 mile north-west), Upton (1 mile north-east), Broadstairs (2 miles north-east) and St Peter's (2 miles north). Further out, we also cover Canterbury (15 miles west), Margate (3 miles north), Dover (15 miles south), Deal (8 miles south), Herne Bay (12 miles west) and Tower Hamlets (15 miles south).
Near you in Ramsgate
We work in homes and buildings around The Derby Arms, Chatham House Grammar School and St George's Boys School and the streets around them. There’s a railway station in Ramsgate itself: Ramsgate station. A little further out are Westwood Cross (1.6 miles north-west) and Ramsgate Museum (under half a mile south-east). The countryside around Ramsgate includes Sandwich and Pegwell Bay.
Different surfaces, different methods
Plasterboard walls
In plasterboard walls, the condition of the board edge matters. Crumbling edges are cleaned back before the sealant goes in.
Masonry and concrete
Holes through concrete and block are rarely neat. We measure the gap at its widest point against the product’s tested range.
Honest limits
New sealant can’t fix everything, and we will tell you before any work starts. Sealant won’t put right:
- Fire risk assessments, which need a qualified assessor
- Construction that doesn’t provide fire resistance on its own
- Sign-off of the building, which sits with building control or your assessor
If in doubt, ring 0345 464 0079 or drop us an email and we’ll say what we think.
What we seal
- Door frames
- Flats & HMOs
- Service penetrations
- Pipe & cable gaps
- Linear gaps
- Plasterboard & masonry
Common questions in Ramsgate
Can you help a landlord with a rental near Ramsgate station?
Yes, we work for landlords and letting agents. Just phone 0345 464 0079 or send us an email and tell us about the property, and we will send you a clear quote.
Is Ramsgate in your area for fire rated sealant?
Yes. Our work covers London and the South East, and Ramsgate is part of that. You can call 0345 464 0079 or drop us an email and let us know what needs doing, and we’ll send you a clear quote.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Can you work in occupied buildings?
Yes. We work in flats, HMOs, schools, offices and other commercial buildings, including occupied ones. The order of work and access are planned with you.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
Do I have to be there?
It depends on the job. For work indoors, someone needs to let us in, and for outside work we will agree access with you when we book.
Where are you based?
Our base is in Crawley, and we cover South East England, London and all of Scotland.
How long does fire rated sealant take?
That depends on the amount of work, but most jobs take from a few hours to a few days, depending on the number of gaps and the access. We will give you a better idea when we quote.
The process
There isn’t much for you to do on the day. Point us to the joints and we will get on with it. The work itself takes anything from a few hours to several days, depending on how many gaps there are from start to finish. A visit in Ramsgate needs access to the work and a place to park close by. For outside work, let us know about side access, gates and any upper-floor joints.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- We remove any old or unsuitable filler and clean the gap.
- We put in whatever backing or fill the product detail specifies.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Locations and products are noted so you have them on file.
Getting ready for the visit
- Let us know about parking restrictions
- For indoor joints, keep the area dry beforehand if you can
- Plan for the work area to be out of bounds to pets and children
How to get a quote
Getting a quote is simple: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job.
Advice
Why deal with it now?
Squirting in whichever sealant is nearest does not make a fire seal. A fire-rated product only performs as tested when it’s installed to its tested detail, so both the product and the method matter. In Ramsgate, as anywhere, most leaks start as a small gap in a joint, and early is when they’re cheapest and quickest to sort.
What it costs depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before any work starts.
Why book with us
- We never seal over old sealant
- 4.9 on Google from 180+ five-star reviews
- One-year guarantee on every job
- Tidy, careful work
Take a look at our cost guide or our reviews.
Signs you need fire rated sealant in Ramsgate
In some buildings the gap was filled with the wrong thing in the first place: general-purpose foam, everyday silicone or caulk where a fire-rated seal was needed. It may look fine, but it is not a fire-rated seal.
It’s worth asking for a quote if you see:
- Gaps around pipes and cables through fire-resisting walls
- Open joints along the top of partitions
- Standard silicone or caulk in a fire-stopping gap
- Gaps flagged on a fire risk assessment
Managing a site like Priory Infant School? Then service openings in fire-resisting walls need checking after any refurbishment.
Questions to ask before booking
- Are they insured?
- How the joint is cleaned and prepared
- What the cure time is
- Which sealant they’ll use, and why