Kent · England
Ramsgate Regrouting
We cover Ramsgate for raking out old, cracked or stained grout and regrouting tiled walls and floors. Old material cut out, joints cleaned and sealed neatly.
- Stained grout that cleaning won’t shift
- Splashback grout that has darkened
- Grout that makes sound tiles look old
Surface by surface
Wet rooms
New grout in a wet room keeps the surface sound. It does not repair failed tanking underneath.
Bathroom wall tiles
Splash areas around basins and baths stain first. We can regroute just those areas or the whole wall.
About our regrouting in Ramsgate
We take the old grout out to a consistent depth, without damaging the edges of the tiles. The joints are then vacuumed, regrouted and cleaned off, and the corners get fresh silicone. Common call-outs are for dirty, worn grout on a tiled floor and grout stained black or orange that won’t clean, across bathroom wall tiles, tiled floors and bathroom floors.
Ramsgate mixes older houses with estates built more recently, so bathrooms range from long-standing suites to recent refits. Whatever their age, sealant and grout tend to go before anything else.
We stand behind the work with a one-year guarantee, so you’re covered after we have gone.
- Location
- Ramsgate (CT11, CT12, CT10)
- Wider area
- Kent
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
What we do, step by step
We work through the job in order: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours, or longer for a fully tiled room, and the area is left clean. For a job in Ramsgate, we need access to where the work is and somewhere nearby to park. If the job is outside, mention gates, side access and anything above ground floor.
- We agree the area to be regrouted and point out any loose tiles.
- Grout is raked out without chipping the tiles.
- The joints are cleaned out and vacuumed.
- The new grout goes in, then the tile faces are cleaned.
- Internal corners and edges are resealed.
How to prepare
- Mention any parking rules near the property
- Tell us about any water getting in
- Clear the area around the work
Ask for a quote
To get a quote, phone 0345 464 0079 or email us and tell us where the job is and what the problem looks like. We will give you a clear price before any work starts.
Read more
Places near Ramsgate
Also in Ramsgate
How we quote for regrouting
Jobs vary more than people expect. What affects the quote:
- Whether the work is at height
- How many areas need sealing
- Any mould that needs treating
- How much there is to do
Doing several joints on one visit normally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. We’ll give you a clear quote for the lot.
What to tell us for a quote
To help us quote quickly, let us know:
- What’s wrong with the joints now
- Any previous sealing or DIY work
- Where the property is
- Roughly how big the job is
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we will explain what’s involved before giving you a price.
Why act early in Ramsgate
Colouring the surface of old grout is a quick cosmetic fix. They do not fill cracks or stop water, and stains can show through again. Raking out and regrouting replaces the grout itself. Draughts from a gap round a frame, damp under a sill or water behind a bath panel all start small, and they’re far easier to fix early.
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
Why choose Mr Mastic in Ramsgate
- 180+ five-star Google reviews
- Old sealant always removed completely
- 12-month guarantee on every job
- Anti-fungal silicone where joints get wet
Take a look at what affects the cost and customer reviews.
What regrouting looks like in Ramsgate
Ramsgate is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Schools such as Priory Infant School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For an older house near a landmark such as St. Luke's Church, older homes can move a little, which is hard on rigid grout and tired sealant. Rented homes near Ramsgate station change hands often, and stained grout drags a rental down, and regrouting between lets puts that right.
Ramsgate is in Kent. Jobs in Ramsgate get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Our Kent coverage runs to 922 places, Ramsgate among them. We also work in Chelmsford, around 48 miles away.
Here we cover the CT11, CT12 and CT10 postcode area for regrouting. Regrouting is available to properties on High Street, Church Road and High Street St Lawrence and the roads around them. Being close to the A254 and A255, Ramsgate is simple for us to get to. We also cover the places around Ramsgate: St Lawrence (1 mile west), Northwood (1 mile north-west), Upton (1 mile north-east), Broadstairs (2 miles north-east) and St Peter's (2 miles north). Within a short drive, we also cover Canterbury (15 miles west), Margate (3 miles north), Dover (15 miles south), Deal (8 miles south), Herne Bay (12 miles west) and Tower Hamlets (15 miles south).
Near you in Ramsgate
Locally, jobs take us to homes and businesses close to The Derby Arms, Chatham House Grammar School and St George's Boys School, among other places. There’s a railway station in Ramsgate itself: Ramsgate station. A little further out are Westwood Cross (1.6 miles north-west) and Ramsgate Museum (under half a mile south-east). Not far away are Sandwich and Pegwell Bay.
DIY sealant or a professional job?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Honest limits
Honest advice matters more to us than a booking, so here’s what sealant can’t fix:
- A leaking shower valve or waste
- Tiles that are loose or hollow behind
- Tiles that are chipped or split
If in doubt, phone 0345 464 0079 or email us and we’ll say what we think.
Where we work in Ramsgate
- Shower walls
- Bathroom floors
- Tiled floors
- Wet rooms
- Kitchen splashbacks
- Bathroom wall tiles
Looking after it afterwards
No joint lasts for ever, but care makes a real difference. A few tips:
- Give the walls a quick rinse after use
- Keep harsh bleach and acid cleaners off the grout
- Keep an eye on the silicone along the edges
- Wipe or squeegee the shower walls
Check the corner silicone now and then. It’s the part that moves, so it’s normally the first thing to need attention, long before the grout does.
Tiles can come away if failed grout is left. Once that happens, regrouting won’t fix it, so it’s worth acting early.
Ramsgate: your questions answered
Can you do regrouting in Ramsgate?
Yes, Ramsgate is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or drop us an email with a few details of the job.
Do you work in hotels near Ramsgate?
Yes. Hotel and guest-house work is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
Can I do it myself?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs.
Do you regrout part of a bathroom, like the shower?
Yes, that is common. The shower generally fails first, so many people regrout just that part.
Will regrouting fix loose tiles?
New grout can’t hold loose tiles in place. We flag any loose or hollow tiles before starting, so you can decide what to do.
Can you do several jobs on one visit?
Yes. Just list everything you need and you will get one quote.
How long does the job take?
That depends on how much there is to do, but as a guide it takes anything from a few hours to a full day, depending on the area. We will give you a better idea when we quote.
Where do you work from?
We work from Crawley. We cover Ramsgate and the rest of Kent, along with the rest of our area.