Highland · Scotland
Ballifeary Bathroom Resealing
Bath, shower, basin, wet room, worktop and sink resealing in Ballifeary, with a one-year guarantee on every job. Ask us for a quote.
- Lumpy, uneven sealant from a DIY attempt
- Cracked, shrunken or lifting silicone
- Splits where the tray meets the wall
Signs you need bathroom resealing in Ballifeary
Baths and trays move. Acrylic in particular gives slightly under the weight of water and a person, while a poorly supported tray can shift underfoot. That movement works at the bead until it splits or peels away.
Most people get in touch when they notice one of these:
- Mouldy sealant that has gone black
- Cracked, shrunken or lifting silicone
- Water escaping at the shower enclosure
- Gaps where the bath or tray has moved
In the older streets around Ness Bank Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Comparing quotes
- What insurance they hold
- Who turns up on the day
- What preparation is included
- Is the old sealant removed completely?
Bathroom resealing in Ballifeary
It is not only bathrooms. The joint between worktop and wall, the edge of the sink and the bottom of the splashback get wet every single day, and water that gets into the back edge of a worktop can swell the board. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. Common call-outs are for water escaping at the shower enclosure and a messy, uneven bead from a previous reseal, on sinks & splashbacks, baths and shower trays & enclosures.
A bathroom in a place like Ballifeary gets the same daily wear as one in a city flat. Limescale is less of a problem with Scotland’s generally soft water, but mould still takes hold in damp sealant and grout.
Your job is guaranteed for a year, as with all our work.
- Place
- Ballifeary (IV3, IV1, IV2)
- Region
- Highland
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
FAQs for Ballifeary
Will you come out to Ballifeary?
Yes. Ballifeary is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Just mention lanes, gates or anything else about the route when you book.
Do you work for hotels and guest houses in Ballifeary?
Yes, we work for hotels as well as homes and businesses. Rooms can be done a few at a time, so the building stays open.
What information do you need?
The location, the problem and the rough size of the job. If you can, email a few pictures.
Will the old sealant be removed?
Always. Sealing over old sealant is the main reason resealing fails early, so we never do it.
Are you an approved applicator?
Yes. We hold ARBOMaster approved applicator status and we’re fully insured too.
Where is Mr Mastic based?
Our base is Crawley, with over 20 years’ experience. We work across South East England, London and Scotland.
Is the work guaranteed?
Yes. We give a 12-month guarantee on every job, and we’re fully insured.
Can you get rid of the black mould in my sealant?
Yes, we can. We strip the bead, treat the joint and lay new anti-fungal silicone.
Keeping the joints in good condition
Looking after new joints is easy, and it makes a real difference:
- Don’t let bottles sit on the bead
- Dry the bead with a towel now and then
- Never pick at the silicone with a blade
- Give the silicone its full cure time
Treat the new bead gently when you clean: warm soapy water and a soft cloth do the job. Scourers and blades can nick the surface, because a damaged bead gives mould a foothold.
A failed kitchen joint is easy to miss. Water gets behind the upstand and into the edge of a laminate worktop, and the board underneath can swell. A reseal in time can save the worktop.
Honest limits
Honest advice matters more to us than a booking, so here’s what sealant cannot fix:
- Cracked or missing grout between tiles (that is regrouting)
- A bath or tray that moves because it isn’t properly supported
- Loose or hollow tiles, or failed tanking behind them
If in doubt, email us at info@mrmastic.co.uk and we’ll say what we think.
Surfaces we seal
- Baths
- Sinks & splashbacks
- Wet rooms
- Kitchen worktops & upstands
- Shower trays & enclosures
- Basins & vanity units
Landlord and commercial work in Ballifeary
If you manage several properties in or around Ballifeary, several properties can go on one quote. Just tell us the addresses and what each one needs, and photos by email help.
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we’ll give you a quote.
Other services in Ballifeary
DIY sealant or a professional job?
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Bathroom resealing around Ballifeary
Ballifeary is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Ballifeary has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
Rented homes near Inverness station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. For site and facilities teams at buildings such as Inverness High School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Ballifeary is about 1 mile west of Inverness, in Highland. For bathroom resealing in and around Ballifeary, it’s easy to get a quote: please drop us a line at info@mrmastic.co.uk. We cover Highland from our Crawley base, Ballifeary included. Across Highland, we cover 253 places, and Ballifeary is one of them.
Here we cover the IV3, IV1 and IV2 postcode area for bathroom resealing. We cover properties on Park Road, Bught Lane and Bught Road. Neighbouring places we cover for bathroom resealing include Inverness (1 mile east), Lochardil (1 mile south-east), Hilton (1 mile east), Merkinch (1 mile north) and Crown (1 mile north-east). Within a short drive, we also cover Cradlehall (4 miles east), Dingwall (12 miles north-west), Muir of Ord (9 miles north-west), Fortrose (9 miles north-east), Conon Bridge (10 miles north-west) and Beauly (8 miles west). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Landmarks near Ballifeary
Locally, jobs take us to homes and businesses close to Cavell Gardens and Maple Court Hotel and the streets around them. The nearest railway station is Inverness station, about 1.1 miles north-east. Well-known places in the area include Royal Northern Infirmary (less than half a mile north-east) and Inverness Museum and Art Gallery (0.8 miles north-east). Not far away are Tomnahurich and Loch Dochfour.
Why it’s worth doing now in Ballifeary
Mould removers can fade the surface of a stained bead, but mould that has grown into the sealant tends to return. Cutting it out and resealing with anti-fungal silicone is the fix that lasts. In an older home around Ballifeary, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
Why Ballifeary customers choose us
- Domestic, commercial and hotel work
- Every job guaranteed for a year
- Arbo and Everbuild products
- An ARBOMaster approved applicator
Take a look at what affects the cost and our reviews.
The process
The work is kept neat and contained to the area we are working on, so you can get on with your day. The job generally takes around two hours for one bath or shower, longer for a whole bathroom. Somewhere like Ballifeary may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- The joint is cleaned, degreased and treated for mould.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- The bead is tooled smooth and you are told the cure time, usually around 24 hours.
Before we arrive
- Tell us about any water getting in
- Keep pets and children clear of the area while we work
- Tell us if parking is tricky
Getting a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that’s easy.