Highland · Scotland
Bathroom Resealing in Arabella
Our applicators work in Arabella on bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Water getting behind the bath panel
- Gaps where the bath or tray has moved
- Water getting behind the kitchen upstand
How we handle bathroom resealing in Arabella
A fresh bead of silicone changes how a bathroom looks more than most people expect. Black, patchy sealant makes clean tiles look tired, and a clean white or clear joint fixes it quickly. Just as important, it closes the gaps water would otherwise get through. If you are dealing with leaks into the floor or ceiling below and new sealant laid over old sealant that is now lifting, we can help.
Being further from a city does not change the work: everything old is cut out, the joints are cleaned and dried, and new sealant or grout goes in. The journey and access are simply planned in advance.
Each job carries a 12-month guarantee.
- Location
- Arabella (IV19)
- Region
- Highland
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
How to look after the new joints
Simple care keeps the joints in good condition. We recommend:
- Give the silicone its full cure time
- Squeegee the walls and tray after use
- Never pick at the silicone with a blade
- Look for lifting corners and small gaps now and then
Give the silicone time to cure before it gets wet, which is usually around 24 hours. After that, a quick wipe after showering helps keep it clean.
Small signs come before a leak: lifting ends, gaps, dark shadows under the bead or a stain downstairs. Any of these means the joint needs attention.
What we do, step by step
Our applicators work methodically: protect, prepare, seal, tidy. For most jobs that takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen and we leave things clean and tidy. Outside jobs in Arabella need a dry day, because sealant will not bond to a wet joint, so external jobs may need to move if the day turns wet. Work indoors isn’t affected.
- We start by protecting the area and stripping out the old bead.
- The joint is cleaned, degreased and treated for mould.
- We let it dry fully and fill the bath with water before sealing.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- Finally we tidy up and explain the cure time before we leave.
How to prepare
- Let us know if you’ve seen damp or leaks
- For indoor joints, keep the area dry beforehand if you can
- Tell us about access, such as stairs, a lift or high-level joints
Get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we’ll explain what’s involved before giving you a price.
Related advice
For landlords and businesses
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can be quoted together.
Bathrooms and kitchens in Arabella
Arabella is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that doesn’t dry out.
In and around Arabella, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
Arabella is about 13 miles north of Nairn, in Highland. Wherever you are in the IV19 postcode area, we can carry out bathroom resealing at your property. Our area takes in 253 places across Highland, from the larger towns to small villages.
Postcode districts we cover here for bathroom resealing: IV19. If you are just outside Arabella, we cover Hill of Fearn (2 miles north-east), Fearn (2 miles north-east), Pitcalnie (2 miles south), Kildary (2 miles west) and Nigg (3 miles south). Larger places within reach include Nairn (13 miles south), Tain (4 miles north-west), Alness (10 miles south-west), Dornoch (9 miles north), Invergordon (8 miles south-west) and Fortrose (13 miles south). Island and remote addresses take a little more planning, so please mention your location when you email us at info@mrmastic.co.uk.
Local landmarks in Arabella
Arabella’s nearest station is Fearn station, about 1.5 miles north. Other landmarks nearby include Milntown Castle (2.6 miles south-west). The countryside around Arabella includes Loch Eye.
Why act early in Arabella
Dealing with sealant early is a short job: the work takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Left until water gets through, the job can grow to lifting panels, drying out and decorating. Around Arabella, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs, plus any working-time requirements on site. Call for a quick quote and we will go through it with you.
Why Arabella clients choose us
- We never seal over old sealant
- We agree the colour with you first
- We’re fully insured
- White, clear, grey or coloured to suit, where the product allows
Take a look at what affects the cost and what customers say.
Places near Arabella
More services for Arabella
DIY versus a professional finish
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
Common questions in Arabella
Is Arabella in your area for bathroom resealing?
Yes, Arabella is within the area we cover. We work across all of Scotland. You can email us at info@mrmastic.co.uk and let us know what needs doing, and we’ll give you a clear quote.
Do you work for landlords with property near Fearn station?
Yes. We work for landlords and agents as well as homeowners, and several properties can go on one quote. You can send an email to info@mrmastic.co.uk with the details for a clear quote.
Will you leave a mess?
We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.
How long does a bath or shower reseal take?
A single bath or shower takes about a couple of hours, including cutting out the old sealant. A full bathroom and kitchen can take most of a day.
Do you hold any approvals?
Yes. We are approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
Where do you work from?
We’re a Crawley-based firm. We work across South East England, London and Scotland.
Do you have insurance?
Yes. We’re fully insured, and we can confirm the details when we quote.
Should I try DIY first?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Do you need bathroom resealing in Arabella?
Black mould is behind a lot of resealing. Bathrooms without good ventilation give mould all the damp it needs, and once it has grown into the bead, cleaning rarely gets it out.
Any of these means the joints need attention:
- Gaps between the worktop and the wall
- A bead that has pulled away from the tiles
- New sealant laid over old sealant that is now lifting
- Gaps where the bath or tray has moved
Letting a property close to Fearn station? Then mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Questions to ask before booking
- Whether the sealant suits the joint
- How much experience the applicator has
- Is VAT in the price?
- How the surfaces are prepared before sealing
How the job changes by surface
Basins & vanity units
The back of a basin gets wet every time someone washes. Old sealant there often goes black at the corners, and we treat it exactly as we would a bath.
Sinks & splashbacks
Splashbacks in glass, tile or acrylic meet the worktop in a long joint. It’s resealed in white, clear or a colour to suit.