Highland · Scotland
Mastic man in IV19
We cover every part of the IV19 postcode district, which takes in Tain, Arabella and Edderton. Every joint is properly prepared, with a one-year guarantee.
Places in IV19
Services in IV19
- New-build mastic & snagging
- Remedial sealant & repairs
- Fire-rated sealant
- Sand mastic for sash & case windows
- Floor & skirting joints
- Gutter, fascia & soffit sealing
- External & façade joints
- Bathroom & kitchen resealing
- Commercial & hotel sealant
- Window & door mastic
- Regrouting
- Glazing & conservatory sealant
- Every service
Tell us what needs doing and your postcode and we’ll give you a clear price: email us at info@mrmastic.co.uk.
Nearby postcode districts
Across Highland
Towns and villages in Highland
All areas
Bathroom resealing in IV19: how it works
Sealant is the soft line between a bath, shower or worktop and the wall. When it splits, shrinks or turns black, water gets behind it and into the wall or floor. Every trace of the old sealant is taken out and replaced with anti-fungal sanitary silicone. We’re often asked to deal with gaps between the worktop and the wall and a reseal done over the top of the old bead, across sinks & splashbacks, wet rooms and basins & vanity units.
Our applicators work methodically: protect, prepare, seal, tidy. Typically it takes two to three hours for a typical bath, depending on how much old sealant there is.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, normally around 24 hours.
What affects the price in IV19
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part, and we’ll explain the quote if you ask.
Why book with us
- Trusted Arbo and Everbuild sealants
- We’re fully insured
- Homes, businesses and hotels
- Sanitary silicone with an anti-fungal additive in wet areas
How to get a quote
We don’t publish a price list, as no two jobs are quite the same. Instead, we send you a clear quote for your job. To arrange one, send an email to info@mrmastic.co.uk.
Around Tain
In Tain, that means homes and buildings near Tain Royal Academy, among other places. There’s a railway station in Tain itself: Tain station. Well-known places in the area include Tain and District Museum (within half a mile north-east) and Dornoch Castle (4.9 miles north). For a walk, there’s Loch Eye.
Where we work in IV19
Across IV19, from Tain, Arabella and Edderton outwards, we see bathrooms and kitchens of every age. Sealant and grout wear out in all of them, whether it’s a family bathroom, a rented flat or a hotel en suite.
We work across all of Scotland, from the cities to the islands, and IV19 is part of that. Longer journeys are planned in advance, and outdoor work around the weather. In the coastal parts of IV19, the sea-facing side of a building takes the most weather, so they’re often the first to fail. The right product and careful preparation help it last.
Tain: Letting a property close to Tain station? Then a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. Managing a site like Tain Royal Academy? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
How to look after the new joints
A little care helps the new joints last. We recommend:
- Squeegee the walls and tray after use
- Run the extractor fan during and after every shower
- Never pick at the silicone with a blade
- Let new sealant cure fully before it gets wet
In a kitchen, don’t let water sit along the back of the worktop. A dry joint lasts longer.
A few black dots in the silicone soon become a black line. When it has grown right through, it rarely cleans out, and nearby grout often goes the same way. Catching it early keeps it a simple reseal.
Work for landlords, hotels and businesses
Letting agents and landlords in IV19 can book us as well as householders. Sealant work between tenants keeps a property looking cared for before the next move-in.
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Different surfaces, different methods
Sinks & splashbacks
Around the sink, we use a product suited to kitchens, including a food-safe sealant where that’s needed. The joint is laid neatly so it’s easy to wipe.
Baths
Acrylic baths flex the most, and even steel and cast iron baths settle slightly when full. Loading the bath with water before sealing allows for it.
How we quote for bathroom resealing
Call for a quick quote. What matters most is:
- The number of rooms or windows
- Whether old sealant or filler has to be cut out
- Any working-time requirements on site
- Which sealant suits the joint
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re not sure whether it needs doing, drop us a line at info@mrmastic.co.uk for an honest opinion and a quote.
What we need to know
What to tell us when you ask for a quote:
- Access, such as stairs, a lift or height
- If someone has resealed it before
- The rough size of the job
- Photos by email, if that’s easy
If you are in IV19 and need bathroom resealing, drop us a line at info@mrmastic.co.uk. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Why it fails
Sealing over old silicone is one of the commonest mistakes we find. Fresh silicone cannot grip the old bead underneath, so it peels, leaks and hides mould behind it.
Most people get in touch when they notice something like this:
- Water getting behind the bath panel
- Water getting behind the kitchen upstand
- New sealant laid over old sealant that is now lifting
- A bead that has pulled away from the tiles
FAQs for IV19
What should I tell you?
Where the job is, what the problem is and roughly how big it is. If you can, email a few pictures.
Will there be a smell?
Sometimes, a little. It fades as the sealant cures, and ventilation helps.
Can you get rid of the black mould in my sealant?
Yes, we replace the mouldy bead. Cleaning products may lighten it, but the lasting fix is new anti-fungal silicone on a clean, treated joint. Airing the room well helps stop it returning.
Do you do commercial work?
Yes. Commercial and hotel work is a large part of what we do. Working times can be discussed when we quote.
Can I add another job to the visit?
Yes, we can. Several rooms, windows or areas can go on one quote.
Is the work guaranteed?
Yes. We give a 12-month guarantee on every job, and we are fully insured.
Is it OK to put new sealant on top of the old bead?
No. New silicone will not bond to old silicone, so it peels away and hides mould and water. All the old sealant comes out first.