Highland · Scotland
Bathroom & kitchen resealing in Loans of Tullich, Highland
Bathroom resealing for Loans of Tullich, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Cracked, shrunken or lifting silicone
- Gaps between the worktop and the wall
- Water getting behind the bath panel
Bathrooms and kitchens in Loans of Tullich
Loans of Tullich is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that does not dry out.
Around Loans of Tullich, as everywhere, bathroom resealing is only as good as the preparation behind it.
Loans of Tullich is about 13 miles north of Nairn, in Highland. From the centre of Loans of Tullich to the outskirts, we cover bathroom resealing for every kind of property, from flats and houses to offices and hotels. We cover 253 towns and villages across Highland, large and small. You can also see our page for Aberdeen, roughly 79 miles from Loans of Tullich.
All of IV20 is within our area for bathroom resealing. Loans of Tullich is on the B9166, which makes it straightforward to reach. Close by, we work in Balintore (1 mile south-east), Shandwick (1 mile south-east), Fearn (1 mile north-west), Hilton of Cadboll (1 mile east) and Hill of Fearn (2 miles north-west). Further out, we also cover Nairn (13 miles south), Tain (6 miles north-west), Alness (13 miles west), Dornoch (9 miles north-west), Invergordon (10 miles south-west) and Fortrose (14 miles south-west). For island and remote addresses, the job takes a little more planning.
What’s near Loans of Tullich
The closest station to Loans of Tullich is Fearn station, roughly 2.5 miles north-west. For a walk, there’s Loch Eye.
Bathroom resealing in Loans of Tullich, done properly
Across Loans of Tullich, the joints we reseal are the ones that fail in any home: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Every joint is cut out, cleaned and left dry before it’s resealed. If you’re dealing with a bead that has pulled away from the tiles and mouldy sealant that has gone black, we can put it right, on wet rooms, kitchen worktops & upstands and sinks & splashbacks alike.
Bathrooms in smaller places like Loans of Tullich work just as hard as those in the cities. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.
Our work is backed for twelve months, in Loans of Tullich and everywhere else we cover.
- Place
- Loans of Tullich (IV20)
- Region
- Highland
- Cover
- One year on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What affects the quote in Loans of Tullich
We quote each job individually. This is what makes a difference:
- Any mould that needs treating
- When we can work, for business premises
- How many rooms, windows or areas are involved
- How easy the joints are to reach
The cost depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before work begins.
Helping us quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- The address or postcode of the job
- What the problem is, such as mould, gaps, leaks or cracking
- How we’d reach the joints
- Roughly how big the job is
There’s no standard price list, because every job is different. Instead, your job gets its own clear quote. To get started, email us at info@mrmastic.co.uk.
When it isn’t the sealant
We won’t take on work that will not last, so these are the limits:
- A tray or bath that’s cracked through
- Cracked or missing grout between tiles (that’s regrouting)
- Leaks from a shower valve, waste or pipework (a plumber’s job)
Not sure which it is? You can send an email to info@mrmastic.co.uk and we will tell you honestly.
Surfaces we seal
- Kitchen worktops & upstands
- Baths
- Basins & vanity units
- Wet rooms
- Sinks & splashbacks
- Shower trays & enclosures
The process
Once we’re on site, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. Most jobs then take half a day or less for one room, longer when the kitchen is included. In smaller Scottish places, parking is generally less of an issue than access and distance. Tell us how to find the property and how to reach the work, and the visit is planned around that.
- We start by protecting the area and stripping out the old bead.
- Next, the joint is cleaned and any mould is treated.
- We let it dry fully and fill the bath with water before sealing.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- We clear away and tell you when it can get wet, generally after around 24 hours.
Before we arrive
- For business premises, tell us about site rules or sign-in
- Let us know about stairs, lifts or work at height
- Where the joints are inside, avoid wetting them before we arrive
Get a quote
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved.
Related advice
Why act early in Loans of Tullich
The difference in a professional reseal is mostly what you don’t see: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Without that preparation, the new bead won’t last. Around Loans of Tullich, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs, along with when we can work on site. Ask us for a quote and we will explain what it covers.
Why us?
- ARBOMaster approved applicator
- Any old sealant cut out fully, not covered over
- Arbo and Everbuild products
- Experience in homes, commercial sites and hotels
Take a look at how sealant jobs are priced and our reviews.
Aftercare tips
A little care helps the new joints last. Our advice:
- Wipe up water along the back of the worktop
- Squeegee the walls and tray after use
- Keep an eye on the corners, where splits start
- Open a window or run the fan so the room dries
Good ventilation does more than any cleaner. Run the extractor fan during and after a shower, so the bead dries out between uses.
Mould that starts as a few spots spreads through the bead. Once it’s deep in the silicone, cleaning generally will not remove it. Catching it early keeps it a simple reseal.
Nearby places to Loans of Tullich
Other services in Loans of Tullich
Landlord and commercial work in Loans of Tullich
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Do you need bathroom resealing in Loans of Tullich?
Black mould is behind a lot of resealing. Steamy rooms that don’t dry out give mould all the damp it needs, and mould that has grown into the silicone usually will not clean off.
If you can see any of these, it’s time to have the joints looked at:
- Black spots spreading through the bead
- Smears of silicone across the tiles
- Sealant that has split, shrunk or peeled away
- Shrunken sealant along the back of a worktop
Letting a property close to Fearn station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
What your quote should include
- How long the guarantee is
- Are they insured?
- Who does the work, and how experienced they are
- Whether the sealant suits the joint
Loans of Tullich questions
Can you do bathroom resealing in Loans of Tullich?
Yes, Loans of Tullich is within the area we cover. We work across all of Scotland. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing, and we’ll give you a clear price.
Do you work for landlords with property near Fearn station?
Yes, rental work is part of what we do. You can email us at info@mrmastic.co.uk with the address and a few details, and we’ll give you a fixed price before we start.
Can you quote for more than one area?
Yes. Tell us about everything you’d like done.
How long will the resealing take?
That depends on the number of joints and the state of the old sealant. Allow a couple of hours for a typical bath or shower.
Is the work guaranteed?
Yes, a 12-month guarantee. Good ventilation and gentle cleaning help it last.
What colours of sealant can you use?
White, clear and a range of colours are available. On a worktop we colour-match where the joint shows.
When can I use the bath or shower again?
We give you the cure time before we leave, and it’s usually around 24 hours. Getting it wet too early can spoil the new joint.
Is it OK to put new sealant on top of the old bead?
No. New silicone will not bond to old silicone, so it lifts and traps water and mould underneath. We always take the old sealant out completely.