Highland · Scotland
External Mastic in Loans of Tullich
Our applicators work in Loans of Tullich on sealing brickwork movement joints, render, cladding and façade joints. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Failed seals between different materials
- Panel joints letting water in
- Hard, crazed mastic that has stopped moving
How the visit works
A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, do the work and clear up. It normally takes anything from a few hours to several days, depending on the building. Around Loans of Tullich, distance and access matter more than parking. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- We start by checking each joint, agreeing the ones to redo and how we will reach them.
- We cut out the failed sealant and rake out any dirt or growth.
- The joint faces are cleaned and primed where the sealant needs it.
- Backing rod goes in next, setting the depth and keeping the sealant off the back of the joint.
- A flexible exterior sealant is applied and tooled in a colour to suit the wall.
How to prepare
- Tell us about any water getting in
- Clear the area around the work
- Keep children and pets away from the work area
Get a quote
Asking for a quote is easy: let us know what needs doing and where and its rough size. A few pictures by email make the job easier to understand, and we will come back to you with a quote.
Advice
External mastic in Loans of Tullich
Movement joints let brickwork, render and cladding expand and shrink without cracking. The sealant in it has to stretch and squeeze for years, and when it fails, the wall takes the strain and water finds a way in. If you are dealing with panel joints letting water in and gaps where render, brick and frames meet, we can put it right, whatever the surface.
Across smaller places in Scotland, stone and harled cottages, farm buildings and newer houses often stand exposed to wind and rain. Gutter joints and wall joints take a battering, so they need a sealant that moves with the building.
A one-year guarantee comes as standard, so you are not left on your own once the job is done.
- Where
- Loans of Tullich (IV20)
- Region
- Highland
- Guarantee
- 12 months on all our work
- Price
- A clear price before we start
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Towns and villages near Loans of Tullich
Other services in Loans of Tullich
Looking after it afterwards
After the cure time, these simple habits help:
- Have failed joints looked at early
- Keep soil, plants and ivy away from the joints
- Keep water from gutters off the wall
- Wash walls gently around the sealant
Keep pressure washers away from the sealant. High-pressure water can lift the edges.
Water getting behind cladding or render can go unnoticed for a long time. By the time there’s a damp patch, the damage can be well established, so it’s worth resealing at the first signs.
What affects the cost of external mastic
Jobs vary more than people expect. The main factors:
- Any working-time requirements on site
- The old material and how stubborn it is
- The product the joint needs
- Access and height
We do not show prices on the website, because the cost depends so much on the job itself. For a quick quote, please send an email to info@mrmastic.co.uk.
Helping us quote
To make quoting easier, let us know:
- A few pictures by email, if you can
- How many joints, rooms or windows are involved
- What the problem is, such as mould, gaps, leaks or cracking
- Whether it has been sealed before
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.
Loans of Tullich questions
Is external mastic in a coastal place like Loans of Tullich any different?
Coastal weather is harder on outside sealant: there’s more wind-driven rain and, closer to the shore, salt in the air. The right product, a clean joint and the right depth all help it cope.
Will you come out to Loans of Tullich?
Yes. Loans of Tullich is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
What information do you need?
Only a few details: where it is, what you’ve noticed and how we reach it. Then send an email to info@mrmastic.co.uk.
Can you match the colour of my brickwork?
We choose a sealant colour to suit the brick, stone or render. There’s a wide choice of exterior colours.
Do I need to be at home?
If the work is inside, we need someone to let us in. Once we have agreed the job, you don’t need to watch us work.
How long should I leave it?
Most sealants are touch-dry well before they’re fully cured. We’ll tell you how long to leave the joint.
Can you reach joints on upper floors?
It depends on the height and the site. Low-level joints are straightforward; for higher work, tell us about the building and we will confirm what’s needed.
How long does external mastic take?
As a guide, most jobs take a few hours for a handful of joints, longer for a whole elevation. Bigger jobs take longer, and we’ll say how long yours will take.
What we can’t put right
Some problems need a builder, plumber or other trade rather than us:
- Damp that is not coming from the joint
- Cracks in the bricks or render themselves, away from the joints
- Subsidence or other structural problems
If in doubt, email us at info@mrmastic.co.uk and we’ll say what we think.
Joints and surfaces we work on
- Render & cladding joints
- Copings & trims
- Concrete & block
- Façade panels
- Brickwork movement joints
- Joints between brick and frames
Outside joints around Loans of Tullich
Loans of Tullich is within about 2 miles of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on movement joints and outside wall joints, which can dry out and crack sooner where a building faces the weather. Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and failed outside joints work against that.
If you let a flat or house near Fearn station, split movement joints are easy to miss on a rental until damp shows inside.
Loans of Tullich is about 13 miles north of Nairn, in Highland. From the centre of Loans of Tullich to the outskirts, external mastic is available for homes and businesses alike. Loans of Tullich is one of 253 places in Highland we cover for external mastic. You can also see our page for Aberdeen, roughly 79 miles from Loans of Tullich.
We work across the IV20 postcode area for external mastic. With the B9166 close by, Loans of Tullich is simple for us to get to. Close by, we work in Balintore (1 mile south-east), Shandwick (1 mile south-east), Fearn (1 mile north-west), Hilton of Cadboll (1 mile east) and Hill of Fearn (2 miles north-west). Larger places within reach include Nairn (13 miles south), Tain (6 miles north-west), Alness (13 miles west), Dornoch (9 miles north-west), Invergordon (10 miles south-west) and Fortrose (14 miles south-west). Remote and island addresses need a little more planning, so please mention your location when you send an email to info@mrmastic.co.uk.
Near you in Loans of Tullich
The nearest railway station is Fearn station, roughly 2.5 miles north-west. Green spaces nearby include Loch Eye.
What we are called out for in Loans of Tullich
Some movement joints have been pointed up with mortar by mistake. With the joint locked solid, the movement turns into cracks elsewhere in the wall.
Signs it’s time to call us include:
- Panel joints letting water in
- Joints with sealant missing in places
- Rigid filler in a joint that should flex
- Water getting into walls through failed joints
In and around Loans of Tullich, as anywhere, good external mastic starts with a clean, dry, properly prepared joint.
Comparing quotes
- Who does the work, and how experienced they are
- What the quote includes, VAT included or not
- What the cure time is
- Whether all the old sealant comes out first
Different surfaces, different methods
Joints between dissimilar materials
Where a frame or panel meets masonry, water often finds a way in. We cut out the old sealant and reseal with a product suited to both surfaces.
Concrete and blockwork
The face of concrete or block is often dusty, so preparation is key. A primer goes on where the product requires one.
Landlords, agents and businesses in Loans of Tullich
For anyone letting property in or around Loans of Tullich, jobs at different addresses can be quoted together. Send us the addresses and the work at each.
Letting agents often deal with us directly. Tell us the address, the job and how access works and we will quote.