Highland · Scotland
Fire Rated Sealant in Loans of Tullich
Our applicators work in Loans of Tullich on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly.
- Gaps where walls meet ceilings or slabs
- Gaps flagged on a fire risk assessment
- Old fire sealant that has split or come away
Fire rated sealant for homes and businesses in Loans of Tullich
Until it’s heated, intumescent sealant behaves like an ordinary sealant; then it swells to help close the gap. Which product suits a gap depends on its width, the materials either side and what runs through it. We work on linear gaps, service penetrations and plasterboard & masonry, and people most often call us about gaps where walls meet ceilings or slabs and fire seals that have cracked with movement.
For holiday lets, guest houses and community buildings in or near Loans of Tullich, the washrooms and kitchens need the same care as any city building, and fire-rated joints should be kept in good order.
Every job comes with a 12-month guarantee.
- Place
- Loans of Tullich (IV20)
- Wider area
- Highland
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Fire rated sealant in Loans of Tullich: local notes
If you run a hotel, guest house or holiday let in a coastal place like Loans of Tullich, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. We install fire-rated sealant to the product’s tested details; we do not certify buildings or carry out fire risk assessments.
In and around Loans of Tullich, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Loans of Tullich is about 13 miles north of Nairn, in Highland. We provide fire rated sealant to homes and businesses in Loans of Tullich and the surrounding area, as part of our work across Highland. We cover 253 towns and villages across Highland, large and small. We also work in Aberdeen, around 79 miles away.
All of IV20 is within our area for fire rated sealant, from the main roads to the quietest streets. Being close to the B9166, Loans of Tullich is simple for us to get to for fire rated sealant. Close by, we work in Balintore (1 mile south-east), Shandwick (1 mile south-east), Fearn (1 mile north-west), Hilton of Cadboll (1 mile east) and Hill of Fearn (2 miles north-west). Further out, we also cover Nairn (13 miles south), Tain (6 miles north-west), Alness (13 miles west), Dornoch (9 miles north-west), Invergordon (10 miles south-west) and Fortrose (14 miles south-west). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
What’s near Loans of Tullich
For rail, the closest station is Fearn station, roughly 2.5 miles north-west of the centre. Green spaces nearby include Loch Eye.
Landlord and commercial work in Loans of Tullich
Failed sealant is one of the commonest items on a check-out report. Several properties can be quoted together.
For anyone letting property in or around Loans of Tullich, several properties can be quoted together. Send us the addresses and the work at each, and photos by email help.
How we quote for fire rated sealant
We don’t publish a price list. The quote depends on:
- Any mould that needs treating
- Any working-time requirements on site
- Access and height
- How much old sealant there is and how hard it is to remove
We don’t show prices on the website, because each job is priced on what it involves. For a quick quote, please email us at info@mrmastic.co.uk and we’ll talk you through it.
What we need to know
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Whether it has been sealed before
- Access, such as stairs, a lift or height
- Pictures of the joints, sent by email
- What the problem is, such as mould, gaps, leaks or cracking
Every job is quoted individually, so the first step is telling us about yours. Simply drop us a line at info@mrmastic.co.uk and describe the job and send pictures if you have them.
What the job involves on each surface
Plasterboard walls
Holes in plasterboard are often cut roughly for services. Gaps that are too big for sealant alone need a different detail and we’ll flag it.
Masonry and concrete
Brick, block and concrete walls and floors are sealed with products tested in masonry. We clean out dust and debris before sealing.
When it isn’t the sealant
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- Issuing a fire rating or certificate for a building
- Large holes that need a different fire-stopping system
- Assessing a building’s fire safety
If in doubt, email us at info@mrmastic.co.uk and we will say what we think before booking.
Surfaces we seal
- Door frames
- Pipe & cable gaps
- Service penetrations
- Flats & HMOs
- Linear gaps
- Plasterboard & masonry
Places near Loans of Tullich
More services for Loans of Tullich
Signs you need fire rated sealant in Loans of Tullich
In some buildings the gap was filled with the wrong thing in the first place: general-purpose foam, everyday silicone or caulk where a fire-rated seal was needed. It may look fine, but it is not a fire-rated seal.
If you can see any of these, it’s time to have the joints looked at:
- Ordinary sealant used where a fire-rated product was needed
- New service routes left unsealed after building work
- Open gaps behind door architraves
- Open holes round services passing through fire walls
For landlords with property near Fearn station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
What to look for in a quote
- How the colour is chosen
- What insurance they hold
- Whether the sealant suits the joint
- How much experience the applicator has
How the visit works
You do not need to clear the whole room or building before we come, only the area right around the joints. Everything nearby is protected, and the job takes from a few hours to a few days, depending on the number of gaps and the access in most cases. For a place like Loans of Tullich, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out and the faces cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used.
Before we arrive
- For indoor joints, keep the area dry beforehand if you can
- Let us know about earlier repairs to the joints
- Move anything stored near the joints
Ask for a quote
Getting a quote is simple: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand, and we’ll take it from there.
Related advice
Keeping the joints in good condition
No joint lasts for ever, but care makes a real difference. Our tips:
- Ask every contractor to reseal any fire stopping they disturb
- Don’t fill fire-stopping gaps with ordinary foam or silicone
- Report cracked or damaged seals as soon as you notice them
- Plan fire stopping into any work that goes through walls or floors
Follow the cure time we give you before decorating over the sealant. Some fire-rated sealants can be painted and some cannot, so ask us which we used.
Small gaps around services are simple to deal with while there are only a few. Over time, more work adds more holes and the job gets bigger.
Your questions about fire rated sealant in Loans of Tullich
How do Scotland’s building regulations apply to fire-rated sealant in Loans of Tullich?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We do not certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Will you come out to Loans of Tullich?
Yes. Loans of Tullich is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Just mention lanes, gates or anything else about the route when you book.
Can ordinary silicone be used in a fire-stopping gap?
No. It might close the gap, but it isn’t a fire-rated seal. A tested fire-rated product is needed, or ask us to do it.
What do you need from me for a quote?
Only a few details: the address or postcode, what’s wrong and any access issues. Then send an email to info@mrmastic.co.uk.
How much does fire rated sealant cost in Loans of Tullich?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote.
Do the sealants smell?
Some sealants have a smell while they cure. Ventilation helps.
How long will you be here?
Most jobs take from a few hours to a few days, depending on the number of gaps and the access. We will confirm how long when we quote.
Does someone need to be in?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.