Highland · Scotland
Fire Rated Sealant in Arabella
Specialist fire rated sealant for Arabella: careful preparation, the right product and tidy work. Call for a quick quote.
- New service routes left unsealed after building work
- Gaps filled with a product that is not fire-rated
- Open joints along the top of partitions
How we handle fire rated sealant in Arabella
A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. We check the size and the substrate before choosing the product, then the sealant goes in to the depth the product’s details set. If you are dealing with gaps filled with a product that isn’t fire-rated and fire seals that have cracked with movement, we can put it right.
For a place like Arabella, the journey and timings are planned in advance, so the job can fit around guests, residents or opening hours where possible.
There’s a 12-month guarantee on every job, large or small.
- Location
- Arabella (IV19)
- Region
- Highland
- Cover
- One year on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Why act early in Arabella
Leaving a gap until a refurbishment comes round can mean years with it open. On its own, sealing it now is a small job that doesn’t depend on other work. Around Arabella, water from a failed joint in an older stone home can soak into timber and plaster.
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
Why Arabella clients choose us
- An ARBOMaster approved applicator
- Anti-fungal silicone where joints get wet
- Full insurance on every job
- 180+ five-star Google reviews
Take a look at our cost guide and our reviews.
Towns and villages near Arabella
Other services in Arabella
Can I do it myself?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
How the visit works
Once we’re on site, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. Most jobs then take a few hours for a handful of gaps, and longer for a whole building. Outdoor work around Arabella depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- We record what was done and flag anything that needs a different system.
Before we arrive
- Let us know about stairs, lifts or work at height
- Mention any parking rules near the property
- Let us know about earlier repairs to the joints
Ask for a quote
Need a quote? Please drop us a line at info@mrmastic.co.uk with a few details. You’ll know what we plan to do, and what it will cost, before any work begins.
Read more
What we cannot put right
Before booking, it’s worth knowing the limits too:
- Doors that aren’t fire doors in the first place
- Construction that does not provide fire resistance on its own
- Sign-off of the building, which sits with building control or your assessor
Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly.
What we seal
- Pipe & cable gaps
- Linear gaps
- Flats & HMOs
- Plasterboard & masonry
- Door frames
- Service penetrations
How the job changes by surface
Door frames
Behind most architraves is a gap between frame and wall. Where it’s open, we seal it to the product’s details for that gap size so the architrave can be refitted.
Service penetrations
New gaps tend to show up where services have been added. Old or unsuitable filler comes out before the right sealant goes in over any backing the detail calls for.
Landlords, agents and businesses in Arabella
Hotels need rooms back in use, so the work can be planned room by room. Hotel work is part of what we do, alongside homes and businesses.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
Commercial buildings in Arabella
For seaside hotels, guest houses and holiday lets around Arabella, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. We install fire-rated sealant to the product’s tested details, though we do not certify buildings or do fire risk assessments.
If you let a flat or house near Fearn station, any gap left by new services in shared walls should be closed with a fire-rated product.
Arabella is about 13 miles north of Nairn, in Highland. Every kind of property in Arabella can book us for fire rated sealant. The work is guaranteed for a year. Arabella is one of 253 towns and villages in Highland we cover for fire rated sealant.
We cover every part of the IV19 postcode area for fire rated sealant and the streets around it. We also cover Hill of Fearn (2 miles north-east), Fearn (2 miles north-east), Pitcalnie (2 miles south), Kildary (2 miles west) and Nigg (3 miles south). We also work in nearby towns such as Nairn (13 miles south), Tain (4 miles north-west), Alness (10 miles south-west), Dornoch (9 miles north), Invergordon (8 miles south-west) and Fortrose (13 miles south). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
What’s near Arabella
For rail, the closest station is Fearn station, about 1.5 miles north. Other landmarks nearby include Milntown Castle (2.6 miles south-west). Open spaces near Arabella include Loch Eye.
Do you need fire rated sealant in Arabella?
In some buildings the gap was filled with the wrong thing in the first place: general-purpose foam, everyday silicone or caulk where a fire-rated seal was needed. It looks sealed, but it isn’t fire-rated.
Most people get in touch when they notice one of these:
- Door frames with gaps between frame and wall
- Gaps where walls meet ceilings or slabs
- Joints picked up in a fire-stopping survey
- Cracked or shrunken fire-rated sealant
Around Arabella, as everywhere, fire rated sealant is only as good as the preparation behind it.
Questions to ask before booking
- What happens if they find a problem under the old sealant
- Is the old sealant removed completely?
- How the joint is cleaned and prepared
- The length of the guarantee
Your questions about fire rated sealant in Arabella
How do Scotland’s building regulations apply to fire-rated sealant in Arabella?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We do not certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
I let a flat near Fearn station. Can you help?
Yes, we work for letting agents and landlords. Just email us at info@mrmastic.co.uk and tell us about the property, and we will send you a clear quote.
Can you tell me which gaps need fire stopping?
No, assessment isn’t something we do. Once you have a specification or action list from your assessor or designer, we can quote for the fire-rated sealant items.
Do you work in flats, HMOs and commercial buildings?
Yes. We work in flats, HMOs, schools, offices and other commercial buildings, including occupied ones. The order of work and access are planned with you.
Can I add another job to the visit?
Yes, we can. More than one area can go on one quote.
Will it make a mess?
We keep the work tidy. We protect what’s around the joints, and we clear up when we’re done.
Can new sealant go over the old?
No, and we never do. It may look fine at first, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
Can I do it myself?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.