Greater London · England

Regrouting in Victoria, Greater London

Problem with your tiled areas in Victoria? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.

  • Old grout in a dated colour
  • Good tiles let down by tired grout
  • Crumbling grout between the tiles

Regrouting in Victoria

Regrouting in Victoria, done properly

Our applicators rake out the old grout to an even depth, taking care not to chip the tile edges. After vacuuming, new grout goes in and the tiles are wiped clean, and the corners get fresh silicone. If you have gaps where the shower grout has gone and grout in a colour the owner wants to change, we can put it right.

London homes include a lot of flats, conversions and mansion blocks, and many bathrooms sit right above someone else’s ceiling. That makes worn sealant and cracked grout in Victoria more than a cosmetic job.

Every job comes with a one-year guarantee.

Place
Victoria (SW1V, SW1P, SW1X)
Region
Greater London
Cover
12 months on all our work
Price
Quoted before any work starts
Call
0345 464 0079
Page updated
26 October 2026
Silicone being applied where a shower enclosure meets beige wall tiles

When something else is needed

It helps to know what we cannot do:

  • Damaged tiles that need replacing
  • Tiles that have come away from the wall
  • Leaks from pipes, valves or wastes (a plumber’s job)

If in doubt, ring 0345 464 0079 or send us an email and we’ll say what we think before booking.

Where we work in Victoria

  • Tiled floors
  • Shower walls
  • Wet rooms
  • Bathroom wall tiles
  • Kitchen splashbacks
  • Bathroom floors

What happens on the day

There’s no need to move everything out before we come, just the space around the work. We protect the rest, and the work takes a few hours, or longer for a fully tiled room in most cases. In Victoria, as in most of London, parking needs a little planning. It helps if you can point us to a visitor permit or a bay close to the door.

  1. First we agree what’s being done and flag any loose tiles.
  2. We remove the old grout carefully.
  3. Dust is cleared from every joint.
  4. The new grout goes in, then the tile faces are cleaned.
  5. Internal corners and edges are resealed.

Before we arrive

  • Tell us about any water getting in
  • Plan for the work area to be out of bounds to pets and children
  • On commercial sites, let us know about site rules

Getting a quote

Asking for a quote is easy: let us know the job and the location and its rough size. Photos by email help us understand the job, and we’ll take it from there.

Get a quick quote

Related advice

Landlord and commercial work in Victoria

Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.

For anyone letting property in or around Victoria, several properties can go on one quote. Just tell us the addresses and what each one needs, and pictures by email help.

Regrouting around Victoria

London has a lot of flats and conversions, and a failed shower or bath seal in one can show up on the ceiling below, which is why it’s worth fixing early. There are hotels and other places to stay in and around Victoria. Hotel bathrooms are part of our work as well as homes, and can be done room by room.

Managing a site like St Peter's Eaton Square CofE Primary School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s. As a London address, Victoria can be tricky for parking: let us know about parking bays, permits or a driveway.

Victoria is about 1 mile south of City of Westminster, in Greater London. Victoria gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. We cover 764 towns and villages across Greater London.

We work across the SW1V, SW1P and SW1X postcode area for regrouting. Whether your property is on Eaton Lane, Gerald Road and Wilton Road or a nearby road, we can help. Main roads around Victoria include the A202 and A302, which makes travel easy. We also cover Belgravia (1 mile north-west), Pimlico (1 mile south-east), Westminster (1 mile north-east), Millbank (1 mile north-east) and Brompton (1 mile west). Larger places within reach include Shoreditch (4 miles north-east), Walthamstow (8 miles north-east), Hoxton (4 miles north-east), Whitechapel (4 miles north-east), Hampstead (4 miles north) and Ruislip (13 miles north-west).

Around Victoria

Around Victoria, our work takes us to homes and buildings near Westminster Cathedral Choir School, Wetherspoons pub and Green Park. Nearby too are Westminster City School (less than half a mile north-east) and London Library (0.9 miles north). Victoria has its own railway station: London Victoria station. A little further out are Baynard's Castle (2.2 miles north-east) and Harrods (0.9 miles west). Green spaces nearby include Ludgate Hill and St. James's Park Lake.

Map of Victoria © OpenStreetMap contributors

Signs you need regrouting in Victoria

Harsh cleaners and scrubbing wear grout away. Bleach and acidic limescale removers can attack it over time, until the joints are rough and low.

The most common problems we see are:

  • Good tiles let down by tired grout
  • Grout in corners that has cracked
  • Grout that’s cracking and breaking up
  • A grout colour that no longer suits the room

Letting a property close to London Victoria station? Then stained grout drags a rental down, and regrouting between lets puts that right.

Questions to ask before booking

  • How the colour is chosen
  • Who turns up on the day
  • Is VAT in the price?
  • Which sealant they’ll use, and why

10 questions to ask before you book

FAQs for Victoria

Do you work in hotels near Victoria?

Yes, hotels and guest houses are among the places we work. Rooms can be done a few at a time, so the building stays open.

Can you help a landlord with a rental near London Victoria station?

Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just call 0345 464 0079 or send us an email with the address and what needs doing, and we’ll give you a clear quote.

Will there be a smell?

Possibly a little. Any smell clears as the sealant cures.

What do you need from me for a quote?

The location, the problem and the rough size of the job. If you can, email a few pictures.

Do you cover Victoria?

Yes, we do. Our applicators work in Victoria.

Do you regrout part of a bathroom, like the shower?

Yes. Many jobs are just the shower walls, or the area where the grout has gone.

Do you guarantee regrouting?

You get our 12-month guarantee on every job, and we are fully insured.

Can you change the grout colour?

Yes, regrouting is the time to do it. Tell us the colour you’d like when you ask for a quote.

How to look after the new joints

No joint lasts for ever, but care makes a real difference. Our tips:

  • Get any tile that moves checked promptly
  • Use a squeegee on the tiles after showering
  • Skip wire brushes and scourers
  • Use gentle cleaners on grout

Check the corner silicone now and then. Corners flex, so it’s generally the first thing to need attention.

Leaving failed grout can mean tiles come loose. By then, new grout alone is not enough so early action pays.

What affects the cost of regrouting

For a quick quote, just ask. The main things that affect it are:

  • Mould in or behind the old joints
  • How much old sealant there is and how hard it is to remove
  • The type of sealant required
  • Access and height

No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part.

Asking for a quote

To help us quote quickly, please include:

  • The type of property
  • What the problem is, such as mould, gaps, leaks or cracking
  • Where the property is
  • A few pictures by email, if you can

For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we’ll talk you through the work.

Can I do it myself?

A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job