Perth and Kinross · Scotland
Fire-rated sealant in Ardler, Perth and Kinross
Our applicators work in Ardler on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly and a one-year guarantee.
- Gaps flagged on a fire risk assessment
- Seals cut through by electricians, plumbers or data installers
- Holes left by a change of layout
Surface by surface
Masonry and concrete
Brick, block and concrete walls and floors are sealed with products tested in masonry. We clean out dust and debris before sealing so the seal has something sound to bond to.
Plasterboard walls
Holes in plasterboard are often cut roughly for services. Where a hole is bigger than the sealant’s tested range, it needs another approach and we’ll flag it.
About our fire rated sealant in Ardler
Fire stopping only performs as intended if it’s done to the detail: correct depth, correct backing and a product suited to the surfaces. That’s the part we focus on, gap by gap. We are often asked to deal with seals cut through by electricians, plumbers or data installers and open gaps behind door architraves, across service penetrations, pipe & cable gaps and linear gaps.
If you look after holiday lets, a guest house or a community building in or near Ardler, the washrooms and kitchens need the same care as any city building, and fire-rated joints should be kept in good order.
We stand behind the work with a one-year guarantee, so you are covered after we’ve gone.
- Where
- Ardler (PH12)
- Region
- Perth and Kinross
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Landlord and commercial work in Ardler
Landlords and letting agents in Ardler can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for.
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
What fire rated sealant looks like in Ardler
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. We install fire-rated sealant to the product’s tested details; we do not certify buildings or carry out fire risk assessments.
In and around Ardler, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint. Community buildings like Ardler Church are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
Ardler is about 6 miles east of Blairgowrie and Rattray, in Perth and Kinross. Every kind of property in Ardler can book us for fire rated sealant. The work is guaranteed for a year. Our Perth and Kinross coverage runs to 107 places, Ardler among them. There’s also a page for Dundee, about 10 miles away.
Every address in PH12 is within our area for fire rated sealant. Whether your property is on Main Street, Wallace Street and Cartwright Place or a nearby road, we can help. Nearby, we also carry out fire rated sealant in Meigle (2 miles north-east), Newtyle (2 miles east), Markethill (3 miles south-west), Coupar Angus (3 miles south-west) and New Alyth (4 miles north-west). Further out, we also cover Perth (15 miles south-west), Blairgowrie and Rattray (6 miles west), Scone (13 miles south-west), Tulloch (15 miles south-west), Rattray (5 miles west) and Stanley (11 miles south-west).
Landmarks near Ardler
Other landmarks nearby include Belmont Castle (1.7 miles north-east) and Blairgowrie Community Hospital (5.9 miles west). Green spaces nearby include Long Loch and Newtyle Hill.
What affects the quote in Ardler
Your quote is based on your job. We take into account:
- The number and length of the joints
- Any working-time requirements on site
- Mould in or behind the old joints
- Which sealant suits the joint
What you pay reflects the work, not guesswork. That is why we ask a few questions first and give you a clear quote before any work starts.
What to tell us for a quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- The address or postcode of the job
- How many joints, rooms or windows are involved
- Photos by email, if that is easy
- Any access issues, like height or stairs
For fire rated sealant in Ardler, send an email to info@mrmastic.co.uk. Tell us what the problem is and where, and we will agree the price before any work begins.
Ardler questions
Is Ardler within the area you cover?
Yes, we do. We work across all of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
Is Ardler in your area for fire rated sealant?
Yes, Ardler is within the area we cover. We work across all of Scotland. Just send an email to info@mrmastic.co.uk with a few details of the job.
Can you quote for more than one area?
Yes. Several rooms, windows or areas can go on one quote.
Where do you work from?
Our base is in Crawley, West Sussex, and we work across South East England, London and Scotland.
Does someone need to be in?
Access is agreed with you when the job is booked. Indoors, that normally means someone at home.
Do you carry out fire risk assessments?
No. We follow the requirements from your assessor, designer or building control.
How long will you be here?
Most jobs take from a few hours to a few days, depending on the number of gaps and the access, including the preparation. Your quote will say how long we expect yours to take.
Is there any odour?
Possibly a little. Any smell clears as the sealant cures, and ventilation helps.
What else we do in Ardler
How the visit works
When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. After that, the work takes a few hours for a handful of gaps, and longer for a whole building. Somewhere like Ardler may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We start with the survey or action list, checking the size and surfaces of every gap.
- We remove any old or unsuitable filler and clean the gap.
- Where the tested detail needs backing or fill, we fit it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- We record the locations and products used for your records.
How to prepare
- For business premises, tell us about site rules or sign-in
- Let us know about stairs, lifts or work at height
- Plan for the work area to be out of bounds to pets and children
Getting a quote
Every job is quoted individually, so the first step is telling us about yours. Simply send an email to info@mrmastic.co.uk and describe the job.
Read more
Why act early in Ardler
For some gaps, sealant is not the right answer and another system is needed. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. We’ll say so if a gap needs something other than sealant. Around Ardler, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
What it costs depends on the size of the job, how much old material has to come out and access to the work. You’ll have a clear quote before any work starts.
What you get with us
- Anti-fungal silicone where joints get wet
- We are fully insured
- ARBOMaster approved applicator
- Every job guaranteed for a year
When it isn’t the sealant
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- Walls or floors that weren’t built to resist fire
- Problems with the door itself rather than the gap around the frame
- Assessing a building’s fire safety
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we will tell you honestly.
Joints and surfaces we work on
- Linear gaps
- Service penetrations
- Flats & HMOs
- Plasterboard & masonry
- Pipe & cable gaps
- Door frames
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Never patch a fire seal with standard sealant
- Ask which product was used before you paint
- Include hidden areas like risers in routine checks
- Ask every contractor to reseal any fire stopping they disturb
Keep the record we give you with the building’s fire safety documents. It helps whoever checks the building next.
When you plan work that goes through walls or ceilings, plan the fire stopping too. Doing it at the time avoids leaving gaps behind.