Argyll and Bute · Scotland
Bathroom & kitchen resealing in Tobermory, Argyll and Bute
Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Tobermory and across Argyll and Bute. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Black spots spreading through the bead
- Smears of silicone across the tiles
- Sealant that has split, shrunk or peeled away
The process
We bring everything the job needs with us. After a quick look at the joints together, we protect the area and start. It normally takes half a day or less for one room, longer when the kitchen is included. In smaller Scottish places, parking is generally less of an issue than access and distance. Tell us how to find the property and how to reach the work.
- We cover the area around the joints we are working on.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
Getting ready for the visit
- Clear the area around the work
- Let us know if you’ve seen damp or leaks
- Let us know about earlier repairs to the joints
Getting a quote
To get a quote, email us at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We’ll send you a clear quote before any work starts.
Related advice
About our bathroom resealing in Tobermory
Sealant that is mouldy, cracked or peeling shouldn’t be left until there’s a leak. A photo of the joints helps when you email us at info@mrmastic.co.uk, and we will give you a clear quote for bathroom resealing in Tobermory. We work on kitchen worktops & upstands, baths and wet rooms, and the jobs we see most are gaps between the worktop and the wall and a joint torn by a bath that flexes.
Bathrooms in smaller places like Tobermory work just as hard as those in the cities. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.
A 12-month guarantee comes as standard, so you’re covered after we’ve gone.
- Location
- Tobermory (PA75)
- Region
- Argyll and Bute
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
For landlords and businesses
We work for landlords and agents as well as householders. Resealing between tenancies is a simple way to keep a property in good order.
In hotels, rooms out of use cost money, so the work can be planned room by room. Hotel work is part of what we do, alongside homes and businesses.
Tobermory questions
Do you cover Tobermory for bathroom resealing?
Yes, Tobermory is within the area we cover. Our work covers the whole of Scotland. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing, and we will give you a clear quote.
What guarantee comes with bathroom resealing in Tobermory?
All our work, in Tobermory and everywhere else, comes with a 12-month guarantee. We are also fully insured and ARBOMaster approved.
Where is Mr Mastic based?
Our base is in Crawley, and we work across South East England, London and Scotland.
Do you do commercial work?
Yes. Commercial and hotel work is a large part of what we do, as well as homes. We can talk about working times when we quote.
Are you ARBOMaster approved?
Yes. We are an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
How long before the new sealant can get wet?
Silicone is touch-dry quite quickly, but it takes longer to cure. Leave it around 24 hours before it gets wet, or follow the cure time we give you.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are glad to have it sorted.
Can you do several jobs on one visit?
Yes. Several rooms, windows or areas can go on one quote.
What sealant work cannot fix
To be straight with you, there are a few things sealant will not fix:
- Water coming from the plumbing rather than the joint
- A cracked shower tray or bath (that needs repair or replacement)
- A tray that rocks until it’s re-bedded
If you’re not sure, just send an email to info@mrmastic.co.uk and we will give you a straight answer before you book.
What we seal
- Baths
- Basins & vanity units
- Sinks & splashbacks
- Wet rooms
- Kitchen worktops & upstands
- Shower trays & enclosures
Surface by surface
Basins & vanity units
Basins take less water than showers, but the joint behind them is splashed every day. Old sealant there often goes black at the corners, and we treat it exactly as we would a bath.
Kitchen worktops & upstands
Upstands and back edges are cut out, cleaned of grease and resealed, because cooking grease stops sealant bonding. Proper degreasing is what helps the new joint last.
How to look after the new joints
No joint lasts for ever, but care makes a real difference. A few tips:
- Check the joints every few months for splits or lifting
- Let new sealant cure fully before it gets wet
- Don’t let bottles sit on the bead
- Wipe up water along the back of the worktop
Good ventilation does more than any cleaner. Run the extractor fan during and after a shower, so the silicone gets a chance to dry.
A split bead lets water through every time the bath or shower is used. Over time that water reaches floors, walls and ceilings. Resealing early stops it.
What else we do in Tobermory
Why deal with it now?
Running new silicone over the old joint can look tidy for a few weeks, but it will not bond. It lifts, traps water and grows mould behind it, so the next person has twice as much to remove. Around Tobermory, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
Leaving a failed joint usually makes the job bigger, not smaller. If you are unsure, send an email to info@mrmastic.co.uk for an honest opinion and a quote.
Why book with us
- Neat joints and a tidy finish
- Sanitary silicone with an anti-fungal additive in wet areas
- Over 20 years’ experience
- An ARBOMaster approved applicator
See what affects the cost and what customers say.
What bathroom resealing looks like in Tobermory
Tobermory is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that doesn’t dry out.
For an older house near a landmark such as Parish Church, walls and floors in older homes can move, and sealant and grout show it first. If you look after a building such as Tobermory High School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Tobermory is in Argyll and Bute. If you need bathroom resealing in Tobermory, it’s easy to get a quote: please email us at info@mrmastic.co.uk. We are based in Crawley and cover Argyll and Bute. Tobermory is one of 118 towns and villages in Argyll and Bute where we work for bathroom resealing.
Jobs for bathroom resealing in PA75 works the same way as everywhere else we cover. That includes homes and businesses on Main Street, Breadalbane Street and Albert Street and the roads around them. Being close to the A848 and B882, Tobermory is easy for our applicators to reach. We also cover Baliscate (1 mile south), Kilchoan (5 miles north), Ballygown (9 miles south-west), Salen (9 miles south-east) and Lochaline (13 miles south-east). Tobermory is one of the larger places we cover in Argyll and Bute. If you are somewhere remote, the job takes a little more planning.
What’s near Tobermory
Around Tobermory, our work takes us to homes and buildings near Aros Park. Other landmarks nearby include Mull Museum (within half a mile east) and St Columba's Roman Catholic Church and Drimnin Castle (2.8 miles east). Not far away are 'S Àirde Beinn and Loch Peallach.
Quotes for bathroom resealing in Tobermory
Call for a quick quote. What matters most is:
- Mould in or behind the old joints
- Whether the work is at height
- Which sealant suits the joint
- How many areas need sealing
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs. Ask us for a quote and we’ll go through it with you.
Helping us quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Where the job is, and your postcode
- Any previous sealing or DIY work
- Photos by email, if that is easy
- The rough size of the job
It all starts with a short chat. Describe the problem, the location and the size of the job. Whenever you’re ready, email us at info@mrmastic.co.uk.