Kent · England
Bathroom & kitchen resealing in Ripple, Kent
Bath, shower, basin, wet room, worktop and sink resealing in Ripple, with a 12-month guarantee on every job. Ask us for a quote.
- Black mould in the silicone that will not clean off
- A messy, uneven bead from a previous reseal
- Gaps where the bath or tray has moved
What happens if it’s left?
A quick bead over the top of the old one might look better for a while, but it can’t stick to what’s underneath. It lifts, traps water and grows mould behind it, and the next reseal means two layers to cut out. Older cottages and farmhouses around Ripple can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
We don’t show prices on the website, because each job is priced on what it involves. For a quick quote, please ring 0345 464 0079 or email us and we’ll talk you through it.
Why us?
- Colour agreed with you before any work starts
- Trusted Arbo and Everbuild sealants
- Tidy, careful work
- A sealant colour to suit the surroundings
Read our cost guide and our reviews.
About our bathroom resealing in Ripple
Sealant is the soft line between a bath, shower or worktop and the wall. Once it cracks or goes mouldy, water starts to find its way through and into the wall or floor. Our team cut the old bead out completely and lay a new one in anti-fungal sanitary silicone. Common call-outs are for lumpy, uneven sealant from a DIY attempt and damp behind the bath or under the tray, across baths, shower trays & enclosures and basins & vanity units.
For a small place like Ripple, bathroom resealing is planned like any other job: the journey and access are simply agreed in advance. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
A 12-month guarantee comes as standard, so you’re not left on your own once the job is done.
- Where
- Ripple (CT14)
- Region
- Kent
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Quotes for bathroom resealing in Ripple
We quote each job individually. This is what makes a difference:
- Whether the work is at height
- The type of sealant required
- The old material and how stubborn it is
- How many areas need sealing
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
What to tell us for a quote
To help us quote quickly, let us know:
- Where the job is, and your postcode
- A few pictures by email, if you can
- If someone has resealed it before
- How many joints, rooms or windows are involved
To get a quote, ring 0345 464 0079 or send us an email with the location and a short description of the problem. We’ll send you a clear quote before any work starts.
For landlords and businesses
For anyone letting property in or around Ripple, several properties can be quoted together. Just tell us the addresses and what each one needs.
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
What the job involves on each surface
Wet rooms
In a wet room, the joints between floor and walls take standing water. They get anti-fungal sanitary silicone, working on the surface joints, not the tanking or drainage.
Sinks & splashbacks
Next to the sink, the sealant has to cope with constant water, including a food-safe sealant where that’s needed. The joint is laid neatly so it’s easy to wipe.
Common questions in Ripple
Do you cover Ripple for bathroom resealing?
Yes. Our work covers London and the South East, and Ripple is part of that. Just phone 0345 464 0079 or send us an email with a few details of the job.
Is Ripple within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are glad to have it sorted.
Can you reseal around my kitchen sink and worktop?
Yes. Where it’s needed by the sink, we use a food-safe sealant.
Will it make a mess?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
Can new silicone go straight over the old?
No. It’s a common reason for reseals failing. The old joint is stripped, cleaned and resealed from scratch.
Do you work for hotels and businesses?
Yes. Hotels, offices and other businesses use us and we’re fully insured.
Where is Mr Mastic based?
We’re a Crawley-based firm. We work across South East England, London and Scotland.
How to look after the new joints
So the new joints stay in good condition:
- Avoid abrasive pads on the sealant
- Keep an eye on the corners, where splits start
- Keep bottles off the sealant line
- Wipe the sealant dry after showering
Keep water off the new bead until it has cured, following the cure time we give you. Once it’s cured, wiping it down after use keeps it looking new.
A failed kitchen joint is easy to miss. Water gets behind the upstand and into the edge of a laminate worktop, where it can make the board swell. A reseal in time can save the worktop.
Towns and villages near Ripple
More services for Ripple
Ripple homes and their sealant
Ripple is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
Rented homes near Walmer station change hands often, and fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. If you live in an older home near Church of St Mary the Virgin, walls and floors in older homes can move, and sealant and grout show it first.
Ripple is about 2 miles south-west of Deal, in Kent. Ripple gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Ripple is one of 922 places in Kent where we work. Chelmsford is on our list too, around 53 miles away.
Here we cover the CT14 postcode area for bathroom resealing. If you need bathroom resealing at a property on Mongeham Road, Sunnyside Close and Sutton Lane or a nearby road, our applicators can take on the job. We also cover Great Mongeham (1 mile north), Mill Hill (1 mile north-east), Northbourne (2 miles north-west), Sholden Meadows (2 miles north) and Sholden (2 miles north-east). Within a short drive, we also cover Canterbury (13 miles north-west), Margate (12 miles north), Dover (5 miles south-west), Folkestone (12 miles south-west), Ramsgate (10 miles north) and Broadstairs (12 miles north).
Near you in Ripple
Locally, jobs take us to homes and businesses close to Goodwin Academy. For rail, the closest station is Walmer station, about 1.1 miles east. Nearby you’ll also find Royal Victoria Hospital (5.5 miles south-west) and Kent Museum of the Moving Image (2.4 miles north-east).
How it works
You don’t need to clear the whole room or building before we come, only the area right around the joints. Everything nearby is protected, and the work takes around two hours for one bath or shower, longer for a whole bathroom for a typical job. Somewhere like Ripple needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First, each joint is checked for movement and signs of water.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- The joint is cleaned, degreased and treated for mould.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- The bead is tooled smooth and you are told the cure time, generally around 24 hours.
Getting ready for the visit
- On commercial sites, let us know about site rules
- Tell us if parking is tricky
- Clear the area around the work
Ask for a quote
Want a quote for bathroom resealing? Please ring 0345 464 0079 or email us and tell us about the job. We will explain what we’d do and give you a clear price before we start.
Related advice
Common problems we fix in Ripple
Not every tube in the shop is meant for a shower. Decorators’ caulk and all-purpose sealants aren’t made for constant wetting, so they crack, discolour or grow mould quickly. Wet areas call for a sanitary silicone with an anti-fungal additive.
Common reasons people contact us include:
- Sealant that has split, shrunk or peeled away
- Damp behind the bath or under the tray
- Splits where the tray meets the wall
- Lumpy, uneven sealant from a DIY attempt
For site and facilities teams at buildings such as St Mary's Catholic Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Comparing quotes
- Whether you can choose the colour
- Who does the work, and how experienced they are
- When the joint can take water or movement
- How the joint is cleaned and prepared