Kent · England
Remedial Sealant in Ripple
Removing failed, mouldy or leaking sealant and putting it right for homes and businesses in Ripple and across Kent. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Kitchen joints letting water behind the worktop
- Repeat leaks from the same joint
- A second bead peeling off the first
Signs you need remedial sealant in Ripple
Silicone only bonds to surfaces that are clean and dry. Residue, moisture or dust left in the joint weaken the bond, so it starts lifting sooner than it should.
Keep an eye out for these signs:
- Worktop sealant that has shrunk and split
- Smears and lumps from a botched reseal
- Sealant peeling off a dusty or damp surface
- Leaks that keep coming back after resealing
In the older streets around Church of St Mary the Virgin, older homes can move a little, which is hard on rigid grout and tired sealant.
Before booking anyone
- What insurance they hold
- Whether you can choose the colour
- What preparation is included
- What product goes in the joint
How we handle remedial sealant in Ripple
Not every leak is a sealant leak. A cracked tray, a failed shower valve or a leaking waste can look just the same. If that’s what we find, we’ll tell you rather than reseal something that will not fix it. We’re often asked to deal with sealant applied over old sealant that has lifted and caulk or the wrong sealant used in a wet area, across leaking tray & enclosure joints, botched or over-sealed joints and expansion joints.
Somewhere as small as Ripple, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
There’s a 12-month guarantee on every job.
- Place
- Ripple (CT14)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
How we quote for remedial sealant
Your quote is based on your job. We take into account:
- When we can work, for business premises
- The old material and how stubborn it is
- Whether there’s mould to deal with
- How easy the joints are to reach
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
What to tell us for a quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- Pictures of the joints, sent by email
- The address or postcode of the job
- If someone has resealed it before
- Roughly how big the job is
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. Whenever you’re ready, call 0345 464 0079 or email us.
How the job changes by surface
Over-sealed & botched joints
A thick bead smeared across tiles often hides mould or gaps. Taking it back shows what’s underneath, and then we reseal it neatly.
Mouldy bath & shower sealant
Where mould keeps coming back, ventilation is usually part of the cause. We’ll reseal and tell you if extraction looks to be the issue.
The process
The work is kept neat and contained to the joints we’re treating, so you can get on with your day. Expect the work to take a few hours for a typical bath or shower, longer where several layers have been applied. Somewhere as small as Ripple, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We look at how the sealant has failed and check for movement or a leak path.
- We strip the joint completely, removing any layers below.
- Next, any mould is treated and the joint dried.
- Moving joints get backing and a flexible sealant to suit.
- The new joint is tooled neatly and we explain anything else we found.
Getting ready for the visit
- Mention any sign-in or site rules at work premises
- Keep pets and children clear of the area while we work
- Let us know about parking restrictions
Getting a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
Read more
Should I try it myself first?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
Your questions about remedial sealant in Ripple
Do you work for landlords with property near Walmer station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can call 0345 464 0079 or send us an email with the details for a clear quote.
Will you come out to Ripple?
Yes. Ripple is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you quote for more than one area?
Yes, we can. More than one area can go on one quote.
How long does remedial resealing take?
The number of joints and layers decides it. We will tell you before any work starts.
What does remedial sealant cost?
We don’t publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. You’ll get a clear quote before we start.
Do I have to be there?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Are you an approved applicator?
Yes. Mr Mastic is an ARBOMaster approved applicator and we are fully insured too.
Will there be a smell?
That depends on the sealant. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Ripple homes and their sealant
Ripple is within about 3 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
Schools such as St Mary's Catholic Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. If you let a flat or house near Walmer station, botched sealant from a previous quick fix is easier to strip out between tenants.
Ripple is about 2 miles south-west of Deal, in Kent. If you need remedial sealant in Ripple, it’s easy to get a quote: please call 0345 464 0079 or email us. We are based in Crawley and cover Kent. Across Kent, we cover 922 places, and Ripple is one of them. Chelmsford is on our list too, about 53 miles from Ripple.
Here we cover the CT14 postcode area for remedial sealant. Whether your property is on Mongeham Road, Sunnyside Close and Sutton Lane or anywhere close by, we can help. If you’re just outside Ripple, we cover Great Mongeham (1 mile north), Mill Hill (1 mile north-east), Northbourne (2 miles north-west), Sholden Meadows (2 miles north) and Sholden (2 miles north-east). Further out, we also cover Canterbury (13 miles north-west), Margate (12 miles north), Dover (5 miles south-west), Folkestone (12 miles south-west), Ramsgate (10 miles north) and Broadstairs (12 miles north).
Landmarks near Ripple
Around Ripple, our work takes us to homes and buildings near Goodwin Academy, among other places. The closest station to Ripple is Walmer station, roughly 1.1 miles east. A little further out are Royal Victoria Hospital (5.5 miles south-west) and Kent Museum of the Moving Image (2.4 miles north-east).
Towns and villages near Ripple
What else we do in Ripple
Why it’s worth doing now in Ripple
Ripping out a bathroom is not normally needed. When the fittings are sound, stripping and resealing the joints is often enough. Where something else has failed, you’ll hear it from us. Around Ripple, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs, along with when we can work on site. Ask us for a quote and we will go through it with you.
What you get with us
- Fully insured
- Colour agreed with you before work begins
- More than 20 years in sealant work
- Anti-fungal silicone where joints get wet
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Check ceilings under showers for marks
- Keep bleach and abrasives off the bead
- Check trays and worktops don’t move
- Find out why the sealant failed first
Don’t let anyone seal over it later. Over-sealing is how many remedial jobs start.
Mould trapped under over-sealed joints spreads unseen. By the time it shows through, the joint is well past saving.