Kent · England
Window Mastic in Ripple
Our applicators work in Ripple on mastic around window and door frames, sills and patio doors. Old sealant removed completely, joints prepared properly.
- Mastic that is falling out in pieces
- Hard, cracked sealant around windows
- Rushed sealant from a window installation
Window mastic for homes and businesses in Ripple
A window frame and the wall around it expand and shrink at different rates. Heat and cold make frames grow and shrink against brick or render that hardly moves. That is why the joint needs a flexible, low-modulus sealant rather than something rigid. If you’re dealing with gaps left after new windows were fitted and mastic that has split away from the wall, we can help, on aluminium frames, window sills and patio & French doors alike.
Around Ripple, many homes face open ground, so their windows and doors take the full weather. That exposure dries out and cracks the mastic around frames and sills faster.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Where
- Ripple (CT14)
- Region
- Kent
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
What we do, step by step
Most of a good job is in the preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes a morning for a couple of windows and a door. In a small place like Ripple, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we look at every frame and agree the list.
- The old mastic is cut out and the surfaces cleaned back.
- Where gaps are deep, backing rod goes in first.
- New exterior sealant goes on in a matching colour and is tooled smooth.
- Every joint is checked before we leave.
Preparing for the visit
- Mention if the joints have been sealed before
- On commercial sites, let us know about site rules
- Mention any parking rules near the property
How to get a quote
For a quote, phone 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. You will have a clear quote before work begins.
Related advice
How to look after the new joints
Looking after new joints is easy:
- Paint up to the joint, not over it
- Make sure the drainage slots aren’t blocked
- Keep jet washers away from the mastic
- Keep timber frames painted
On timber frames, keep the paintwork in good order, since wood that gets wet swells and shrinks more. Keep paint off the silicone itself.
Water trapped behind a failed joint can start rot in timber frames and sills. Rotten timber needs a joiner, not a sealant, so early resealing is worth it.
Questions from Ripple
Can you help a landlord with a rental near Walmer station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can ring 0345 464 0079 or drop us an email with the details for a clear quote.
Is Ripple within the area you cover?
Yes. Ripple is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Are you ARBOMaster approved?
Yes. We hold ARBOMaster approved applicator status, and we are fully insured.
Will the old sealant be removed?
Yes. We cut out all the old sealant and clean the joint.
What sealant do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
Can I do it myself?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.
Do you work for hotels and businesses?
Yes. We have worked for hotels, offices and other businesses.
Do you have sealant for grey or black windows?
Yes. We can use white, brown, anthracite grey, black or clear.
Landlord and commercial work in Ripple
Mouldy or split sealant often shows up at the end of a tenancy. Several properties can be quoted together.
Housing providers, facilities teams and property managers book us too in Ripple and across Kent. We can quote a run of properties together, and we’re fully insured.
How we quote for window mastic
We quote each job individually. This is what makes a difference:
- Whether there’s mould to deal with
- Whether the work is at height
- How much old sealant there is and how hard it is to remove
- How much there is to do
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
What to tell us for a quote
You don’t need to know the technical terms. It helps if you can tell us:
- Where the job is, and your postcode
- How we’d reach the joints
- Photos by email, if that’s easy
- What the problem is, such as mould, gaps, leaks or cracking
Need a quote? Please phone 0345 464 0079 or drop us an email with a few details. We’ll explain what we’d do and give you a clear price before we start.
What the job involves on each surface
Patio & French doors
The joints around patio doors run a long way, top, sides and threshold. Most leaks start at the bottom corners, so they get particular care.
Aluminium frames
Large aluminium doors have long joints down each side and across the head, and the bottom joint sees the most water. We prepare and reseal every joint, backing the deep ones.
Ripple homes and the weather
Ripple is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. Both are hard on the mastic around window and door frames, which can dry out and crack sooner where a building faces the weather. Compared with the north and west, the South East gets less rain, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
For an older house near a landmark such as Church of St Mary the Virgin, the joint between an old wall and a newer frame is normally the first place rain gets in. Schools such as St Mary's Catholic Primary School are buildings too, and the mastic around its windows and doors needs looking after like any other building’s. For landlords with property near Walmer station, sound mastic around windows and doors keeps out the draughts and damp that tenants notice first.
Ripple is about 2 miles south-west of Deal, in Kent. Whether you are in the middle of Ripple or further out, window mastic is available for homes and businesses alike. Our Kent coverage runs to 922 places, Ripple among them. Chelmsford is on our list too, around 53 miles away.
Jobs for window mastic in CT14 is quoted and booked the same way as anywhere else. If you need window mastic at a property on Mongeham Road, Sunnyside Close and Sutton Lane or a nearby road, our applicators can take on the job. We also cover the places around Ripple: Great Mongeham (1 mile north), Mill Hill (1 mile north-east), Northbourne (2 miles north-west), Sholden Meadows (2 miles north) and Sholden (2 miles north-east). Further out, we also cover Canterbury (13 miles north-west), Margate (12 miles north), Dover (5 miles south-west), Folkestone (12 miles south-west), Ramsgate (10 miles north) and Broadstairs (12 miles north).
Local landmarks in Ripple
Typical jobs here are in homes near Goodwin Academy. For rail, the closest station is Walmer station, about 1.1 miles east of the centre. Well-known places in the area include Royal Victoria Hospital (5.5 miles south-west) and Kent Museum of the Moving Image (2.4 miles north-east).
Towns and villages near Ripple
More services for Ripple
Why it’s worth doing now in Ripple
Once mastic fails, rain can get between the frame and the wall. Left long enough, it can stain inside walls, spoil plaster and rot wooden frames. A reseal is a much smaller job. Where a wall is exposed, as many are in small places like Ripple, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
We do not show prices on the website, because each job is priced on what it involves. Call for a quick quote and we will talk you through it.
Why Ripple customers choose us
- 180+ five-star Google reviews
- An ARBOMaster approved applicator
- You choose the colour before work begins
- We leave the area clean and tidy