Kent · England
Sand Mastic in Ripple
Sand mastic in Ripple from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Weathered mastic on the most exposed windows
- Mastic dropping out of the joint
- Silicone on a period window that looks wrong
How it works
Once we are on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take anything from a few hours to a full day, depending on how many windows. In a small place like Ripple, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we agree which joints need doing.
- We remove the old, loose mastic.
- Deep gaps are packed so the mastic sits at the right depth.
- We apply the mastic by hand and shape it.
- We dress the finish so it sits neatly against the masonry.
Getting ready for the visit
- Mention any parking rules near the property
- Mention if the joints have been sealed before
- On commercial sites, let us know about site rules
Ask for a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that is easy.
Related advice
Sand mastic in Ripple, done properly
Fresh sand mastic forms a skin quite soon but full hardening takes longer. Traditional guidance is not to paint over it, so ask us before you decorate. We work on stone surrounds, timber door frames and period & listed homes, and the jobs we see most are patchy fillers round a sash window and cracked mastic round a front door frame.
Around Ripple, many homes face open ground, so their windows and doors take the full weather. Exposed frames and sills lose their mastic sooner than sheltered ones.
All of our work is guaranteed for twelve months.
- Where
- Ripple (CT14)
- Region
- Kent
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Windows and doors in Ripple
Ripple is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That is hard on the mastic around older windows and doors, especially on the side facing the sea. With historic houses such as Walmer Castle (about 1.9 miles east) nearby, there’s older building stock in the area around Ripple as well as newer homes. Where a home is older, older timber frames in brick or stone need a different approach from a modern uPVC window.
If you let a flat or house near Walmer station, older sash windows in a rental need their mastic kept sound to keep the weather out. Managing a site like St Mary's Catholic Primary School? Then the mastic around its windows and doors needs looking after like any other building’s.
Ripple is about 2 miles south-west of Deal, in Kent. Ripple gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Ripple is one of 922 places in Kent where we work for sand mastic. We also work in Chelmsford, about 53 miles from Ripple.
Our applicators cover all of CT14 for sand mastic. Local streets include Mongeham Road, Sunnyside Close and Sutton Lane, and we cover them all. Neighbouring places we cover for sand mastic include Great Mongeham (1 mile north), Mill Hill (1 mile north-east), Northbourne (2 miles north-west), Sholden Meadows (2 miles north) and Sholden (2 miles north-east). Within a short drive, we also cover Canterbury (13 miles north-west), Margate (12 miles north), Dover (5 miles south-west), Folkestone (12 miles south-west), Ramsgate (10 miles north) and Broadstairs (12 miles north).
Local landmarks in Ripple
Around Ripple, our work takes us to homes and buildings near Goodwin Academy and the streets around them. Ripple’s nearest station is Walmer station, roughly 1.1 miles east of the centre. Nearby you’ll also find Royal Victoria Hospital (5.5 miles south-west) and Kent Museum of the Moving Image (2.4 miles north-east).
For landlords and businesses
Letting agents often deal with us directly. Tell us the address, the job and how access works.
Housing providers, facilities teams and property managers book us too in Ripple and across Kent. Several sites can be quoted together, and we are fully insured for the work.
How we quote for sand mastic
There’s no set price list, because no two jobs are the same. What we look at:
- Any mould that needs treating
- The type of sealant required
- The number and length of the joints
- How many rooms, windows or areas are involved
The cost reflects the work involved, not guesswork. That is why we ask a few questions first and give you a clear quote before work begins.
What we need to know
There’s no need for technical detail. Just tell us:
- The problem you’ve noticed
- Where the property is
- Whether it has been sealed before
- How many joints, rooms or windows are involved
Want a quote for sand mastic? Please call 0345 464 0079 or drop us an email and tell us about the job. We will explain what we’d do and give you a clear quote before work begins.
Common problems we fix in Ripple
Sand mastic slowly weathers. It dries out, cracks and loses its grip on the stone or timber.
Any of these means the joints need attention:
- Gaps where the frame meets the masonry
- Crumbling sand mastic round a window
- Window mastic to renew ahead of painting
- Mastic worn away on windows facing the weather
For an older house near a landmark such as Church of St Mary the Virgin, the joint between an old wall and a newer frame is generally the first place rain gets in.
Questions to ask before booking
- Who turns up on the day
- How the surfaces are prepared before sealing
- What the quote includes, VAT included or not
- What happens if the job turns out different
What else we do in Ripple
FAQs for Ripple
Do you cover smaller places like Ripple?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you help a landlord with a rental near Walmer station?
Yes, we work for landlords and letting agents. Just call 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear quote.
Can I add another job to the visit?
Yes, and it often makes sense. Doing several areas at once is usually more efficient, so mention them when you ask for a quote.
Where are you based?
Our base is Crawley. Our area covers South East England, London and Scotland.
Which products do you use?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we’ll tell you what we’re using.
Will you leave a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint before resealing.
Do the sealants smell?
Possibly a little. Any smell clears as the sealant cures.
What the job involves on each surface
Stone surrounds
Sand mastic sits naturally against stone. It finishes to look like part of the surround.
Sash and case windows
Sash windows are where we do most sand mastic work. Each joint round the box is raked out and renewed.
What we can’t put right
Honest advice matters more to us than a booking, so here’s what new sealant will not do:
- Sashes that need overhauling
- Putty and glazing repairs
- Planning or listed building consent (your local planning authority decides)
Not sure which it is? You can phone 0345 464 0079 or send us an email and we will tell you honestly before booking.
Joints and surfaces we work on
- Stone surrounds
- Timber door frames
- Tenement windows
- Period & listed homes
- Sash and case windows
- Brick reveals
How to look after the new joints
So the new joints stay in good condition:
- Leave the new mastic unpainted
- Take care around the mastic when scraping paint
- Keep sills and gutters clear so water drains away
- Renew mastic before redecorating the windows
Do not touch or press the mastic while it hardens. It skins over quickly, but takes longer to harden fully.
Fine cracks show the mastic is starting to fail. Renewing it then is simpler than waiting until it falls out.