Kent · England
Nonington Bathroom Resealing
Problem with your baths, showers and worktops in Nonington? We remove the old material, prepare the joints and seal them properly.
- Mouldy sealant that has gone black
- A joint torn by a bath that flexes
- Sealant that has split, shrunk or peeled away
When something else is needed
To be straight with you, some problems need a different trade:
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Tiles that have come away from the wall
- A tray or bath that is cracked through
Not sure which it is? You can phone 0345 464 0079 or email us and we’ll tell you honestly before you book.
Surfaces we seal
- Sinks & splashbacks
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
- Baths
- Kitchen worktops & upstands
How we handle bathroom resealing in Nonington
Sealant is the soft line between a bath, shower or worktop and the wall. Once it cracks or goes mouldy, water starts to find its way through and into the wall or floor. Every trace of the old sealant is taken out and replaced with anti-fungal sanitary silicone. We work on shower trays & enclosures, basins & vanity units and kitchen worktops & upstands, and common reasons people get in touch are failed sealant on the screen profile and smears of silicone across the tiles.
Somewhere as small as Nonington, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
We stand behind the work with a one-year guarantee.
- Where
- Nonington (CT15)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Places near Nonington
Also in Nonington
Why it’s worth doing now in Nonington
Most of the work in a good reseal happens before any silicone goes on: cutting out every trace of the old bead, cleaning, treating mould and letting the joint dry. Without that preparation, the new bead won’t last. In a small place like Nonington, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Combining jobs into one visit generally makes better use of the time than several visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
Why us?
- Sealant colour chosen to suit
- We agree the colour with you first
- 20+ years of sealant experience
- Neat joints and a tidy finish
Take a look at our cost guide and what customers say.
Can I do it myself?
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Nonington questions
Do you work for landlords with property near Aylesham station?
Yes, rental work is part of what we do. Just call 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear quote.
Is Nonington in your area for bathroom resealing?
Yes. We work across London and the South East, and Nonington is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job.
Do I need to be at home?
For indoor joints, yes, someone needs to let us in. Once we have agreed the job, you do not need to watch us work.
Can new silicone go straight over the old?
No, never. A bead laid over old silicone soon starts to come away. Every trace of the old bead is removed first.
Can you reseal around my kitchen sink and worktop?
Yes. Worktops, sinks and splashbacks are all part of the job, with a sealant suited to kitchens, colour-matched where it shows.
How long does it take to reseal a bath or shower?
Allow two to three hours for a typical bath, depending on how much old sealant there is. You’ll know how long to expect before work begins.
Do you take out the old sealant first?
Yes, always, and completely. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
Should I try DIY first?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
What bathroom resealing looks like in Nonington
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Schools such as Nonington Church of England Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For an older house near a landmark such as Church of St Mary, walls and floors in older homes can move, and sealant and grout show it first. Rented homes near Aylesham station change hands often, and a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Nonington is about 7 miles north-west of Dover, in Kent. Wherever you are in the CT15 postcode area, we can carry out bathroom resealing at your property. 922 places in Kent are on our list. For nearby work, see our Chelmsford page.
Postcode districts we cover here for bathroom resealing: CT15. Bathroom resealing is available to properties on Vicarage Lane, St Mary's Close and Park View Rise. If you’re just outside Nonington, we cover Snowdown (1 mile south-west), Frogham (1 mile south), Ratling (1 mile north-west), Chillenden (1 mile north-east) and Barfrestone (1 mile south-east). Further out, we also cover Canterbury (7 miles north-west), Margate (13 miles north-east), Dover (7 miles south-east), Folkestone (10 miles south), Ramsgate (11 miles north-east) and Broadstairs (13 miles north-east).
Landmarks near Nonington
For rail, the closest station is Aylesham station, roughly 0.8 miles west.
How it works
We bring everything the job needs with us. After a quick look at the joints together, the area is protected and the work begins. Most jobs take a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. In a small place like Nonington, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by protecting the area and stripping out the old bead.
- Next, the joint is cleaned and any mould is treated.
- Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We clear away and tell you when it can get wet, normally after around 24 hours.
How to prepare
- Let us know about stairs, lifts or work at height
- Mention if the joints have been sealed before
- Keep pets and children clear of the area while we work
Getting a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. When it suits you, phone 0345 464 0079 or send us an email.
Advice
How to look after the new joints
So the new joints stay in good condition:
- Don’t let bottles sit on the bead
- Keep an eye on the corners, where splits start
- Dry the bead with a towel now and then
- Stick to a soft cloth and a mild cleaner
Good ventilation does more than any cleaner. Run the extractor fan during and after a shower, so the bead dries out between uses.
A failed kitchen joint is easy to miss. Splashes run behind the back edge and soak into the worktop, and the board underneath can swell. Resealing before that happens protects the worktop.
Different surfaces, different methods
Wet rooms
Wet rooms rely on sound joints at floor and wall junctions. They get anti-fungal sanitary silicone, and our work is on the visible joints only.
Sinks & splashbacks
Splashbacks in glass, tile or acrylic meet the worktop in a long joint. It’s resealed in white, clear or a colour to suit.
What affects the quote in Nonington
Every job gets its own quote. These are the things that affect it:
- The size of the job
- How many rooms, windows or areas are involved
- Mould in or behind the old joints
- Whether old sealant or filler has to be cut out
The cost depends on the size of the job, how hard the old material is to remove and access to the work. We give a clear quote before any work starts.
Asking for a quote
To make quoting easier, let us know:
- If someone has resealed it before
- What the problem is, such as mould, gaps, leaks or cracking
- Where the job is, and your postcode
- Photos by email, if that is easy
Call for a quick quote, or email us if that’s easier. Describe what needs sealing and we’ll talk you through the work before giving you a price.