Kent · England
Bathroom & kitchen resealing in Frogham, Kent
Professional bathroom resealing in and around Frogham, with old sealant always removed completely and a 12-month guarantee.
- Lumpy, uneven sealant from a DIY attempt
- Failed sealant on the screen profile
- Black spots spreading through the bead
About our bathroom resealing in Frogham
With over 20 years in the trade, we reseal baths, showers and kitchens in homes across Frogham. We are fully insured ARBOMaster approved applicators, and the work comes with a 12-month guarantee. We work on sinks & splashbacks, baths and kitchen worktops & upstands, and common reasons people get in touch are gaps between the worktop and the wall and two layers of silicone, both failing.
Being in a small place like Frogham makes no difference to the job itself: the journey and access are simply agreed in advance. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
All our work is covered by our one-year guarantee, wherever you are in Kent.
- Where
- Frogham (CT15)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Can I do it myself?
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
When to call us in Frogham
A bath shifts a little every time it’s filled and emptied. An acrylic bath flexes under load, and a tray that is not fully bedded can rock. That movement works at the bead until it splits or peels away.
People normally contact us when they notice something like this:
- Black spots spreading through the bead
- Leaking joints on a shower screen
- Lumpy, uneven sealant from a DIY attempt
- Leaks into the floor or ceiling below
For landlords with property near Snowdown station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
What your quote should include
- How hidden problems are handled
- Whether the sealant suits the joint
- What the cure time is
- Which colour the sealant will be
Bathroom resealing around Frogham
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
Homes close to Church of St Nicholas include some older properties, and walls and floors in older homes can move, and sealant and grout show it first. For site and facilities teams at buildings such as Nonington Church of England Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Frogham is about 6 miles north-west of Dover, in Kent. For bathroom resealing in and around Frogham, please call 0345 464 0079 or email us for a quick quote. We are based in Crawley and cover Kent, Frogham included. 922 places in Kent are on our list, from the larger towns to small villages. There’s also a page for Chelmsford, about 49 miles away.
We work across the CT15 postcode area for bathroom resealing. We also cover the places around Frogham: Barfrestone (1 mile south-east), Snowdown (1 mile north-west), Nonington (1 mile north), Woolage Village (1 mile west) and Elvington (1 mile east). We also work in nearby towns such as Canterbury (8 miles north-west), Margate (14 miles north-east), Dover (6 miles south-east), Folkestone (9 miles south), Ramsgate (12 miles north-east) and Broadstairs (14 miles north-east).
What’s near Frogham
Frogham’s nearest station is Snowdown station, roughly 0.8 miles north-west. Well-known places in the area include Buckland Hospital (6 miles south-east).
Nearby places to Frogham
Also in Frogham
Quotes for bathroom resealing in Frogham
We quote each job individually. These are the things that affect it:
- The old material and how stubborn it is
- Whether there’s mould to deal with
- The number of rooms or windows
- Working hours on commercial sites
Leaving a failed joint usually makes the job bigger, not smaller. If you are not sure whether it needs doing, phone 0345 464 0079 or email us for an honest opinion and a quote.
What to tell us for a quote
Before you ask for a quote, have a think about:
- Roughly how big the job is
- Any access issues, like height or stairs
- Where the property is
- If someone has resealed it before
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that’s easy.
How to look after the new joints
Once the sealant has cured, a few habits help it last:
- Wait for the cure time we give you
- Dry worktop joints after washing up
- Don’t let bottles sit on the bead
- Look for lifting corners and small gaps now and then
Treat the new bead gently when you clean: a mild bathroom cleaner and a soft cloth is enough. Scourers and blades can nick the surface, and a nicked bead lets mould in sooner.
Do not wait for a refit to deal with failed sealant. Like paintwork, sealant needs renewing from time to time, and replacing it when it fails protects the rest of the room.
Honest limits
To be straight with you, some problems need a different trade:
- Failed grout lines across the wall
- A tray that rocks until it’s re-bedded
- A cracked shower tray or bath (that needs repair or replacement)
If in doubt, call 0345 464 0079 or drop us an email and we will say what we think.
Where we work in Frogham
- Basins & vanity units
- Wet rooms
- Baths
- Shower trays & enclosures
- Sinks & splashbacks
- Kitchen worktops & upstands
Frogham: your questions answered
Do you cover smaller places like Frogham?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for landlords with property near Snowdown station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just call 0345 464 0079 or drop us an email with the address and what needs doing, and we will send you a clear quote.
Do you guarantee your resealing?
Yes, a 12-month guarantee. Looking after the joint as we suggest helps it last.
Is white the only colour available?
White, clear and a range of colours are available. On a worktop we colour-match where the joint shows.
Is it OK to put new sealant on top of the old bead?
No. It’s a common reason for reseals failing. The old joint is stripped, cleaned and resealed from scratch.
Can you quote for more than one area?
Yes. Just list everything you need and we will quote it together.
Will it make a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
What do you put in the joint?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Why act early in Frogham
A clean new bead makes a room look cared for, which matters if you’re letting a property or selling it. A smeared, uneven DIY bead does the opposite. Older cottages and farmhouses around Frogham can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
What you pay reflects the work, not guesswork. That is why we ask a few questions first.
Why us?
- Quality sealants from Arbo and Everbuild
- 12-month guarantee on every job
- A sealant colour to suit the surroundings
- You choose the colour before work begins
Read our cost guide and what customers say.
What happens on the day
All our tools and materials come with us in the van, so there’s nothing for you to buy. After a quick look at the joints together, we protect the area and start. Most jobs take two to three hours for a typical bath, depending on how much old sealant there is. For a village or hamlet like Frogham, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First, each joint is checked for movement and signs of water.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, usually around 24 hours.
Getting ready for the visit
- Let us know if you’ve seen damp or leaks
- Let us know about stairs, lifts or work at height
- For business premises, tell us about site rules or sign-in
Getting a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll talk you through the work and give you a clear quote.