Kent · England
Floor Joint Sealing in Nonington
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for homes and businesses in Nonington and across Kent. Fully insured, ARBOMaster approved and guaranteed for a year.
- Threshold joints that have opened or worn
- Grout used at the floor edge instead of sealant
- Open joints that fill with dirt
How we handle floor joint sealing in Nonington
Every floor moves a little, so its edges need a joint that can flex. We seal skirting gaps, tiled floor movement joints and concrete floor joints using a product that suits the floor. If you’re dealing with cracked caulk along skirting in bathrooms and kitchens and failed joint filler in concrete floors, we can help, whatever the surface.
Somewhere as small as Nonington, new homes tend to be conversions, self-builds or a few houses rather than an estate. Each still needs its sealant and floor joints finished properly.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.
- Where
- Nonington (CT15)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Joints and finishes in Nonington homes
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. That is why the skirting and threshold joints need a flexible seal.
Community buildings like Church of St Mary are part of the picture too: joints in its floors, skirtings and thresholds need resealing as they wear. If you let a flat or house near Aylesham station, a tidy floor and skirting joint helps a rental look ready for the next tenant. Managing a site like Nonington Church of England Primary School? Then entrance and corridor floor joints take a lot of traffic.
Nonington is about 7 miles north-west of Dover, in Kent. We provide floor joint sealing to homes and businesses in Nonington and nearby, as part of our work across Kent. Across Kent, we cover 922 places, and Nonington is one of them. Chelmsford is on our list too, around 48 miles away.
All of CT15 is within our area for floor joint sealing. If you need floor joint sealing at a property on Vicarage Lane, St Mary's Close and Park View Rise or a nearby road, our applicators can take on the job. Other places close to Nonington include Snowdown (1 mile south-west), Frogham (1 mile south), Ratling (1 mile north-west), Chillenden (1 mile north-east) and Barfrestone (1 mile south-east). We also work in nearby towns such as Canterbury (7 miles north-west), Margate (13 miles north-east), Dover (7 miles south-east), Folkestone (10 miles south), Ramsgate (11 miles north-east) and Broadstairs (13 miles north-east).
Landmarks near Nonington
The closest station to Nonington is Aylesham station, roughly 0.8 miles west.
FAQs for Nonington
Can you help a landlord with a rental near Aylesham station?
Yes. We work for landlords and letting agents as well as householders, and several properties can go on one quote. You can call 0345 464 0079 or send us an email with the details for a clear quote.
Do you cover smaller places like Nonington?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you reseal concrete floor joints in an industrial unit?
Yes, from warehouses and units to offices and shops. We can plan around your opening times, and out-of-hours work can be arranged.
Can you match the sealant colour?
Generally, yes. White, clear and grey are common, and other colours are available for many products, and we agree the colour with you before we start.
What does floor joint sealing cost?
Size, access and the old material all affect the cost. Call for a quick quote and we’ll talk you through it.
Do you use a paintable sealant?
If you tell us beforehand, yes. We use a paintable flexible sealant on joints you plan to paint, and silicone elsewhere.
Can you use decorators’ caulk instead?
Caulk works on still, dry joints, but it splits where the joint moves or gets wet. For most floor joints, we use a flexible sealant.
When can I walk on the floor?
We give you a cure time for each joint. Feet are generally fine first, then mopping, then heavy wheels in most cases.
How the visit works
Once we’re on site, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. After that, the work takes a few hours, depending on the length of joint. For a village or hamlet like Nonington, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We start by looking at the floor, the gap and the traffic, then choose the product.
- We take out any old caulk, sealant or grout along the line.
- The joint is vacuumed clean, with backing fitted wherever depth matters.
- We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
- The joint is tooled to a neat finish and we tell you when it can take feet and a mop.
Getting ready for the visit
- Tell us about any water getting in
- Keep children and pets away from the work area
- For indoor joints, keep the area dry beforehand if you can
Ask for a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. When it suits you, phone 0345 464 0079 or email us.
Advice
What happens if it’s left?
Open joints along wet floors let water into the subfloor and behind skirting. Dealing with it early keeps the repair to the joint. Where a wall is exposed, as many are in small places like Nonington, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Doing several joints on one visit is normally more efficient than separate visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
Why book with us
- Old sealant always removed completely
- An ARBOMaster approved applicator
- Full insurance on every job
- Rated 4.9 stars on Google
See our cost guide or what customers say.
Looking after it afterwards
Aftercare is simple:
- Check the sealant is paintable before decorating
- Look at floor joints each spring
- Avoid sloshing water against skirting
- Have a cracking tiled floor checked before tiles break
Avoid flooding the floor when you clean. Less water at the edges helps the joints last.
Small gaps are quick to seal. Left alone, they collect dirt and widen.
What the job involves on each surface
Skirting boards
Skirting pulls away from the floor as floors shrink and settle. A flexible sealant closes the gap without cracking in a colour to suit.
Commercial floors
Commercial washrooms and kitchens have floor joints that get wet constantly. They’re resealed with a flexible, water-resistant sealant.
When something else is needed
A few problems are outside what sealant work can do:
- Loose, hollow or cracked tiles, which need a tiler
- Concrete repairs beyond the joint
- Floors that are uneven or need levelling
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we will tell you honestly before you book.
Joints and surfaces we work on
- Concrete floor joints
- Thresholds
- Skirting boards
- Wet room & bathroom floors
- Commercial floors
- Tiled floors
Places near Nonington
What else we do in Nonington
What affects the cost of floor joint sealing
Call for a quick quote. What matters most is:
- The type of sealant required
- Access and height
- Whether old sealant or filler has to be cut out
- The number of rooms or windows
The cost reflects the work involved, not guesswork. That is why we ask a few questions first and give you a clear price before we start.
What we need to know
There’s no need for technical detail. It helps if you can tell us:
- The rough size of the job
- Whether it has been sealed before
- The address or postcode of the job
- Pictures of the joints, sent by email
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and email pictures if that is easy.
Work for landlords, hotels and businesses
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.
In hotels, rooms out of use cost money, so the work can be planned room by room. We’ve worked in hotels as well as homes and businesses.