Kent · England
Bathroom & kitchen resealing in Nash, Kent
Bath, shower, basin, wet room, worktop and sink resealing in Nash, with a one-year guarantee on every job. Ask us for a quote.
- Mouldy sealant that has gone black
- Gaps between the worktop and the wall
- A reseal done over the top of the old bead
Why act early in Nash
Mould removers can fade the surface of a stained bead, but where mould is inside the silicone it normally comes back. Cutting it out and resealing with anti-fungal silicone is the fix that lasts. Where a wall is exposed, as many are in small places like Nash, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Combining jobs into one visit normally makes better use of the time than several visits, so tell us about everything that needs sealing. We will send you a clear quote for the lot.
Why choose Mr Mastic in Nash
- Anti-fungal silicone where joints get wet
- We never seal over old sealant
- A 12-month guarantee on all work
- 180+ five-star Google reviews
Read what affects the cost or our reviews.
Bathroom resealing for homes and businesses in Nash
Kitchens need the same care as bathrooms. The joint between worktop and wall, the edge of the sink and the bottom of the splashback all take splashes every day, and water behind a laminate worktop can make it swell. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. Common call-outs are for leaking joints on a shower screen and lumpy, uneven sealant from a DIY attempt, on baths, wet rooms and sinks & splashbacks.
Homes around Nash are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
We stand behind the work with a 12-month guarantee, so you’re covered after we’ve gone.
- Place
- Nash (CT3)
- Region
- Kent
- Cover
- 12 months on all our work
- Quotes
- A clear price before we start
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Honest limits
In fairness, some problems need a different trade:
- Tiles that have come away from the wall
- Movement from a bath with loose feet or no proper support
- A cracked shower tray or bath (that needs repair or replacement)
If you are not sure, just call 0345 464 0079 or email us and we will give you a straight answer.
Surfaces we seal
- Basins & vanity units
- Wet rooms
- Shower trays & enclosures
- Sinks & splashbacks
- Kitchen worktops & upstands
- Baths
What affects the cost of bathroom resealing
Your quote is based on your job. We take into account:
- Mould in or behind the old joints
- The type of sealant required
- The number of rooms or windows
- Whether old sealant or filler has to be cut out
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
Asking for a quote
What to tell us when you ask for a quote:
- What the problem is, such as mould, gaps, leaks or cracking
- The address or postcode of the job
- The type of property
- Pictures of the joints, sent by email
Need a quote? Please phone 0345 464 0079 or drop us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Landlords, agents and businesses in Nash
We work for landlords and agents as well as householders. Resealing between tenancies is a simple way to keep a property in good order.
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
Nash questions
Will you come out to Nash?
Yes. Nash is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you help a landlord with a rental near Adisham station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can phone 0345 464 0079 or drop us an email with the details for a clear quote.
Do you guarantee your resealing?
Yes, a 12-month guarantee. Good ventilation and gentle cleaning help it last.
Where is Mr Mastic based?
Our base is in Crawley, West Sussex, and we work across South East England, London and Scotland.
Do you hold any approvals?
Yes. We’re approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.
How do I get a quote for bathroom resealing in Nash?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote.
How long before the new sealant can get wet?
Around 24 hours is typical, and we confirm the time for the product used. Getting it wet too early can spoil the new joint.
Can you do several jobs on one visit?
Of course. Combining jobs makes good use of the visit.
Aftercare tips
No joint lasts for ever, but care makes a real difference. A few tips:
- Wipe the sealant dry after showering
- Check the joints every few months for splits or lifting
- Keep scourers and sharp tools away from the bead
- Don’t leave water standing on kitchen joints
Keep water off the new bead until it has cured, which is generally around 24 hours. Once it’s cured, wiping it down after use keeps it looking new.
There’s no need to wait for a full refurbishment. Like paintwork, sealant needs renewing from time to time, and replacing it when it fails protects the rest of the room.
Towns and villages near Nash
More services for Nash
Bathroom resealing in Nash: local notes
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Letting a property close to Adisham station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Nash is about 7 miles east of Canterbury, in Kent. We carry out bathroom resealing for homeowners, landlords and businesses in Nash and the surrounding area, as part of our work across Kent. We cover 922 towns and villages across Kent. Our Chelmsford page covers work nearby.
We cover every part of the CT3 postcode area for bathroom resealing and the streets around it. Close by, we work in Hoaden (1 mile north-east), Perry (1 mile west), Shatterling (1 mile south-west), Elmstone (1 mile north) and Durlock (1 mile south-east). Within a short drive, we also cover Canterbury (7 miles west), Margate (9 miles north-east), Dover (10 miles south), Folkestone (14 miles south), Ramsgate (8 miles north-east) and Broadstairs (10 miles north-east).
Near you in Nash
For rail, the closest station is Adisham station, roughly 3.7 miles south-west. A little further out are White Mill (3.6 miles east) and St Martins Hospital (6 miles west). The countryside around Nash includes Monk's Wall nature reserve.
What we’re called out for in Nash
Older sealant shrinks and hardens. Along worktops it tends to pull back from the wall, opening a hairline gap that lets water and crumbs in. Hot pans and harsh cleaners do not help.
People normally contact us after spotting something like this:
- A reseal done over the top of the old bead
- A bead that has pulled away from the tiles
- Smears of silicone across the tiles
- Black mould in the silicone that will not clean off
For an older house near a landmark such as Elmstone Church, older homes can move a little, which is hard on rigid grout and tired sealant.
What to look for in a quote
- Who does the work, and how experienced they are
- How the colour is chosen
- Are they insured?
- How the joint is cleaned and prepared
How the visit works
Before we leave, we go over the finished joints with you and explain the cure time. The work normally takes two to three hours for a typical bath, depending on how much old sealant there is, depending on the size of the job. Somewhere like Nash needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We cover the area around the joints we are working on.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
How to prepare
- Mention any tricky access
- On commercial sites, let us know about site rules
- Try not to wet indoor joints just before the visit
How to get a quote
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved.