Kent · England
Molash Bathroom Resealing
We cover Molash for bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly and a one-year guarantee.
- A messy, uneven bead from a previous reseal
- Sealant that has split, shrunk or peeled away
- Splits where the tray meets the wall
Landlord and commercial work in Molash
In hotels, rooms out of use cost money, so the work can be planned room by room. Hotel work is part of what we do, alongside homes and businesses.
For anyone letting property in or around Molash, jobs at different addresses can go on one quote. Send us the addresses and the work at each.
Bathroom resealing in Molash
The bead of silicone around a bath, tray or worktop is what keeps water out of the gaps. Once it cracks or goes mouldy, water starts to find its way through. Our team cut the old bead out completely and lay a new one in anti-fungal sanitary silicone. If you are dealing with damp behind the bath or under the tray and water escaping at the shower enclosure, we can put it right.
Homes around Molash are mostly houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
A one-year guarantee comes as standard, so you are covered after we’ve gone.
- Where
- Molash (CT4)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Molash questions
Is Molash within the area you cover?
Yes. Molash is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
I let a flat near Wye station. Can you help?
Yes, we work for landlords and letting agents. Just ring 0345 464 0079 or email us and tell us about the property, and we’ll give you a clear price.
Can you just seal over the old silicone?
No. New silicone will not bond to old silicone, so it lifts and traps water and mould underneath. We always take the old sealant out completely.
Do you have insurance?
Yes. We are fully insured.
What should I tell you?
Only a few details: where it is, what you’ve noticed and how we reach it. Then phone 0345 464 0079 or drop us an email.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We explain the product when we quote.
Is there any odour?
It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Do you do kitchens as well as bathrooms?
Yes. Where it’s needed by the sink, we use a food-safe sealant.
What we do, step by step
The work is kept neat and contained to the area we are working on, so you can carry on as normal. Expect the work to take two to three hours for a typical bath, depending on how much old sealant there is. For a village or hamlet like Molash, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We cover the area around the joints we’re working on.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
How to prepare
- Tell us about access, such as stairs, a lift or high-level joints
- Move anything stored near the joints
- Tell us about any previous sealing or DIY attempts
Getting a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
Advice
What bathroom resealing looks like in Molash
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For an older house near a landmark such as Church of St Peter, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Rented homes near Wye station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Molash is about 6 miles south of Faversham, in Kent. Whether you’re in the middle of Molash or further out, we cover bathroom resealing for every kind of property, from flats and houses to offices and hotels. Our area takes in 922 places across Kent, large and small. Chelmsford is on our list too, around 39 miles away.
Here we cover the CT4 postcode area for bathroom resealing. That includes homes and businesses on The Street, Pound Lane and Church Lane and the roads around them. If you’re just outside Molash, we cover Shottenden (2 miles north-east), Bilting (2 miles south-east), Perrywood (3 miles north), Mountain Street (3 miles east) and Godmersham (3 miles east). Further out, we also cover Ashford (6 miles south), Canterbury (9 miles north-east), Sittingbourne (11 miles north-west), Folkestone (15 miles south-east), Whitstable (10 miles north-east) and Faversham (6 miles north).
Local landmarks in Molash
Typical jobs here are in homes near George Inn and the streets around them. The nearest railway station is Wye station, about 3.2 miles south of the centre. Other landmarks nearby include Tower keep castle at Chilham (2.7 miles east).
Can I do it myself?
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
What affects the cost of bathroom resealing
There’s no set price list. The quote depends on:
- Whether there’s mould to deal with
- When we can work, for business premises
- Which sealant suits the joint
- How easy the joints are to reach
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
Asking for a quote
To make quoting easier, let us know:
- The address or postcode of the job
- If someone has resealed it before
- The rough size of the job
- Access, such as stairs, a lift or height
Getting a quote is simple: let us know what needs doing and where. A few photos by email make the job easier to understand.
Honest limits
In fairness, some problems need a different trade:
- Water coming from the plumbing rather than the joint
- Damage behind the tiles that needs a tiler
- Water getting in through the grout rather than the sealant
If you are not sure, just phone 0345 464 0079 or send us an email and we’ll give you a straight answer.
Where we work in Molash
- Sinks & splashbacks
- Basins & vanity units
- Kitchen worktops & upstands
- Wet rooms
- Shower trays & enclosures
- Baths
How to look after the new joints
Simple care keeps the joints in good condition. We recommend:
- Open a window or run the fan so the room dries
- Dry the bead with a towel now and then
- Keep an eye on the corners, where splits start
- Stick to a soft cloth and a mild cleaner
Wipe up standing water along the worktop joint. The drier the joint stays, the longer it lasts.
Mould that starts as a few spots spreads through the bead. When it has grown right through, it rarely cleans out. Replacing the sealant early keeps the job small.
Why act early in Molash
Running new silicone over the old joint can look tidy for a few weeks, but it will not bond. Water creeps under it and mould follows. In a small place like Molash, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re not sure whether it needs doing, phone 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.
What you get with us
- One-year guarantee on every job
- Over 20 years’ experience
- Arbo and Everbuild products
- We agree the colour with you first
Read our cost guide and what customers say.