Kent · England
Bathroom Resealing in Shottenden
Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Shottenden and across Kent. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- A reseal done over the top of the old bead
- A messy, uneven bead from a previous reseal
- Mouldy sealant that has gone black
How we handle bathroom resealing in Shottenden
It is not only bathrooms. Worktop upstands, sink edges and splashback joints get wet every single day, and water that gets into the back edge of a worktop can swell the board. We reseal them with a kitchen-suitable silicone, matched to the worktop where it’s on show. If you’re dealing with a bead that has pulled away from the tiles and splits where the tray meets the wall, we can help, whatever the surface.
For a small place like Shottenden, bathroom resealing is planned like any other job: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.
- Location
- Shottenden (CT4)
- Wider area
- Kent
- Cover
- A year, on every job
- Price
- A clear price before work begins
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
How the job changes by surface
Basins & vanity units
Vanity units have long, worktop-style joints against the wall. Water that gets behind can damage the unit, so a neat, continuous bead matters.
Sinks & splashbacks
Water getting under the rim of an inset sink can soak the worktop. We reseal the visible edge of the sink where it has failed.
Quotes for bathroom resealing in Shottenden
We don’t publish a price list. What we look at:
- How many areas need sealing
- How easy the joints are to reach
- Whether there’s mould to deal with
- The amount of work
We don’t show prices on the website, because each job is priced on what it involves. For a quick quote, please call 0345 464 0079 or drop us an email and we will talk you through it.
Asking for a quote
To help us quote quickly, let us know:
- Any previous sealing or DIY work
- The rough size of the job
- If it’s domestic, commercial or a hotel
- Access, such as stairs, a lift or height
Need a quote? Please phone 0345 464 0079 or send us an email with a few details. We will explain what we’d do and give you a clear quote before we start.
Also near Shottenden
What else we do in Shottenden
When to call us in Shottenden
Black mould is behind a lot of resealing. Steamy rooms that do not dry out keep the silicone damp for hours, and mould that has grown into the silicone usually won’t clean off.
Look out for these signs:
- Black spots spreading through the bead
- A reseal done over the top of the old bead
- Water getting behind the kitchen upstand
- Water escaping at the shower enclosure
Around Shottenden, as everywhere, bathroom resealing is only as good as the preparation behind it.
Before you book anyone
- When the joint can take water or movement
- How the surfaces are prepared before sealing
- Which sealant they’ll use, and why
- Who does the work, and how experienced they are
Landlord and commercial work in Shottenden
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
In hotels, rooms out of use cost money, so the work can be planned room by room. We’ve worked in hotels as well as homes and businesses.
Why act early in Shottenden
Bleach and mould sprays may lighten black marks for a while, but where mould is inside the silicone it generally comes back. The lasting answer is to remove the bead and start again. Where a wall is exposed, as many are in small places like Shottenden, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Doing several joints on one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. You’ll get one clear quote for the whole job.
Why book with us
- Neat joints and a tidy finish
- Sanitary silicone with an anti-fungal additive in wet areas
- Sealant colour chosen to suit
- Homes, businesses and hotels
Read what affects the cost or customer reviews.
Shottenden homes and their sealant
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
For landlords with property near Selling station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Shottenden is about 5 miles south of Faversham, in Kent. Anywhere in CT4, we can carry out bathroom resealing at your property. We cover 922 towns and villages across Kent, large and small. You can also see our page for Chelmsford, roughly 39 miles from Shottenden.
Here we cover the CT4 postcode area for bathroom resealing. Streets in the area include Shottenden Road, Goldups Lane and Beaney's Lane, and we cover them all. We also cover the places around Shottenden: Perrywood (1 mile north), Selling (1 mile north), Hogben's Hill (2 miles north), Molash (2 miles south-west) and Mountain Street (2 miles south-east). We also work in nearby towns such as Ashford (8 miles south), Canterbury (7 miles east), Sittingbourne (10 miles north-west), Whitstable (8 miles north-east), Faversham (5 miles north) and Herne Bay (12 miles north-east).
Around Shottenden
The closest station to Shottenden is Selling station, about 2 miles north of the centre. Other landmarks nearby include Tower keep castle at Chilham (1.6 miles east).
When it is not the sealant
We’d rather tell you now than do work that will not last, so here’s what sealant cannot put right:
- Water coming from the plumbing rather than the joint
- Cracked or missing grout between tiles (that’s regrouting)
- Loose or hollow tiles, or failed tanking behind them
If you’re not sure, just phone 0345 464 0079 or drop us an email and we’ll give you a straight answer.
Joints and surfaces we work on
- Shower trays & enclosures
- Sinks & splashbacks
- Basins & vanity units
- Kitchen worktops & upstands
- Wet rooms
- Baths
Your questions about bathroom resealing in Shottenden
Is Shottenden in your area for bathroom resealing?
Yes, Shottenden is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or drop us an email with a few details of the job, and we’ll give you a clear quote.
Do you work for landlords with property near Selling station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just ring 0345 464 0079 or email us with the address and what needs doing, and we’ll give you a clear price.
Do you do kitchens as well as bathrooms?
Yes. Worktops, sinks and splashbacks are all part of the job, in a kitchen-suitable sealant, matched to the worktop where it’s on show.
What do you put in the joint?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
Do you hold any approvals?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
What does bathroom resealing cost?
It depends on the job, so we quote each one individually. To get one, ring 0345 464 0079 or drop us an email and let us know what needs doing and where.
When can I use the bath or shower again?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Leave it around 24 hours before it gets wet, or as long as we advise for that product.
Is white the only colour available?
White, clear and a range of colours are available. On a worktop we colour-match where the joint shows.
What we do, step by step
Good joint work is mostly preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it usually takes a morning or an afternoon for most single baths and showers. For a village or hamlet like Shottenden, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
Before we arrive
- Where the joints are inside, avoid wetting them before we arrive
- Plan for the work area to be out of bounds to pets and children
- Clear items away from the joints we’re working on
Get a quote
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we’ll explain what’s involved.