Kent · England
Bathroom & kitchen resealing in Mountain Street, Kent
Problem with your baths, showers and worktops in Mountain Street? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- A messy, uneven bead from a previous reseal
- Gaps between the worktop and the wall
- Black spots spreading through the bead
About our bathroom resealing in Mountain Street
Resealing is a small job that makes a big difference. Black, patchy sealant makes clean tiles look tired, and a neat new joint puts that right in a short visit. Just as important, it closes the gaps water would otherwise get through. We work on wet rooms, baths and sinks & splashbacks, and common reasons people get in touch are two layers of silicone, both failing and a joint torn by a bath that flexes.
Somewhere as small as Mountain Street, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Location
- Mountain Street (CT4)
- Wider area
- Kent
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
When it is not the sealant
Before you book, it’s worth knowing the limits too:
- Cracks in the tray itself rather than the joint
- Loose or hollow tiles, or failed tanking behind them
- Cracked or missing grout between tiles (that’s regrouting)
If in doubt, call 0345 464 0079 or email us and we will say what we think before you book.
What we seal
- Baths
- Kitchen worktops & upstands
- Wet rooms
- Shower trays & enclosures
- Basins & vanity units
- Sinks & splashbacks
When to call us in Mountain Street
Black mould is behind a lot of resealing. Steamy rooms that do not dry out give mould all the damp it needs, and once it has grown into the bead, cleaning rarely gets it out.
People generally contact us after spotting something like this:
- Cracked, shrunken or lifting silicone
- Black spots spreading through the bead
- Failed sealant on the screen profile
- Water getting behind the bath panel
In the older streets around Church of St Mary, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
What to look for in a quote
- What happens if the job turns out different
- Whether VAT is included
- Whether they seal over old material or remove it
- What guarantee comes with the work
Looking after it afterwards
To keep the joints looking good and working properly:
- Look for lifting corners and small gaps now and then
- Avoid abrasive pads on the sealant
- Give the silicone its full cure time
- Open a window or run the fan so the room dries
Clean the silicone with care: warm soapy water and a soft cloth do the job. Avoid scouring pads and anything sharp, and a nicked bead lets mould in sooner.
A split bead lets water through every time the bath or shower is used. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Resealing early stops it.
Landlord and commercial work in Mountain Street
We also work for property managers and facilities teams. We can quote a run of properties together, and we’re fully insured.
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
Bathroom resealing around Mountain Street
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Chilham station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Mountain Street is about 6 miles south-west of Canterbury, in Kent. If you need bathroom resealing in Mountain Street, please ring 0345 464 0079 or drop us an email for a quick quote. We cover Kent from our Crawley base, Mountain Street included. We cover 922 towns and villages across Kent, from the larger towns to small villages. We also work in Chelmsford, around 40 miles away.
We work across CT4 for bathroom resealing. If you’re just outside Mountain Street, we cover Chilham (1 mile north-east), Godmersham (1 mile south), Old Wives Lees (1 mile north), Shottenden (2 miles north-west) and Bilting (2 miles south). Further out, we also cover Ashford (8 miles south-west), Canterbury (6 miles north-east), Sittingbourne (12 miles north-west), Folkestone (14 miles south-east), Whitstable (9 miles north) and Faversham (6 miles north-west).
Local landmarks in Mountain Street
Typical jobs here are in homes near Woolpack Inn and Broadham Down, among other places. The closest station to Mountain Street is Chilham station, about 0.8 miles north-east. A little further out are Kent and Canterbury Hospital (5.7 miles east) and Chilham Castle (under half a mile north).
Why act early in Mountain Street
Mould removers can fade the surface of a stained bead, but mould that has grown into the sealant tends to return. Cutting it out and resealing with anti-fungal silicone is the fix that lasts. Older cottages and farmhouses around Mountain Street can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re unsure, phone 0345 464 0079 or email us and we will give you an honest view and a quote.
Why book with us
- You choose the colour before work begins
- Domestic, commercial and hotel work
- An ARBOMaster approved applicator
- Sealant colour chosen to suit
FAQs for Mountain Street
Do you work for landlords with property near Chilham station?
Yes, rental work is part of what we do. You can call 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before we start.
Is Mountain Street within the area you cover?
Yes. Mountain Street is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you quote for more than one area?
Yes. Just list everything you need.
Can you reseal around my kitchen sink and worktop?
Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then a colour-matched bead is laid.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned.
How long will the resealing take?
That depends on the number of joints and the state of the old sealant. Allow a couple of hours for a typical bath or shower.
What sealant do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Is it OK to put new sealant on top of the old bead?
No. Fresh silicone cannot stick to the old bead, so it peels away and hides mould and water. All the old sealant comes out first.
What the job involves on each surface
Wet rooms
Not every wet room leak is a sealant problem. We reseal the joints and will tell you if the water seems to be coming from somewhere else.
Shower trays & enclosures
There are usually two jobs in a shower: the tray-to-wall joint and the enclosure joints. Both take water every day, so both are resealed with anti-fungal sanitary silicone.
Nearby places to Mountain Street
What else we do in Mountain Street
The process
We keep the work tidy and contained to the area we are working on, so you can get on with your day. The job normally takes two to three hours for a typical bath, depending on how much old sealant there is. For a village or hamlet like Mountain Street, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We protect the area and cut out all of the old sealant.
- Next, the joint is cleaned and any mould is treated.
- We let it dry fully and fill the bath with water before sealing.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We clear away and tell you when it can get wet, generally after around 24 hours.
Getting ready for the visit
- Clear the area around the work
- Tell us about any previous sealing or DIY attempts
- Plan for the work area to be out of bounds to pets and children
Get a quote
For a quote, call 0345 464 0079 or email us with the location and a short description of the problem. You will have a clear quote before we start.