Kent · England
Floor Joint Sealing in Molash
Problem with your floor joints in Molash? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Gaps at thresholds between rooms
- Open gaps along the bottom of skirting boards
- Floor edges that trap water and grime
Floor joint sealing in Molash, done properly
Floor joint sealing is mostly about choosing the right product and preparing the joint. Old caulk, grout or failed sealant comes out first, the joint is cleaned and backed where needed, then the new sealant goes in. Common call-outs are for failed seals where bathroom floors meet baths and panels and skirting that has pulled away from the floor, across commercial floors, concrete floor joints and skirting boards.
Older homes in small places like Molash often have timber floors that move with the seasons, so skirting and threshold joints need a flexible sealant rather than a rigid filler.
You are covered for a year from the day we finish. If anything is not right with it, phone 0345 464 0079 or send us an email.
- Place
- Molash (CT4)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Questions from Molash
Can you help a landlord with a rental near Wye station?
Yes. We work for letting agents and landlords as well as householders. Just ring 0345 464 0079 or send us an email with the address and what needs doing, and we will give you a clear quote.
Will you come out to Molash?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
What do you put in the joint?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we will tell you what we are using.
Will the old sealant be removed?
Yes, always, and completely. New sealant won’t bond properly to old, so any old material comes out before anything new goes in.
Is there a guarantee?
Yes: twelve months. If anything is not right with the work within the year, let us know and we’ll sort it.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Do you seal kitchen plinths to the floor?
Yes. Wet-area floor joints are sealed with a flexible, water-resistant silicone.
Can you quote for more than one area?
Yes. More than one area can be quoted together.
Nearby places to Molash
What else we do in Molash
What we’re called out for in Molash
Grout is rigid, so a tiled floor with nowhere to move cracks along a grout line. Cracks often run straight along a line of joints, showing where a movement joint was needed.
Look out for these signs:
- Caulk that has cracked where the floor moves
- Perimeter joints in tiled floors filled with grout
- Concrete floor joints that have broken down
- Gaps between floors and kitchen plinths
Community buildings like Church of St Peter are part of the picture too: floor and skirting joints in halls and kitchens wear like any others.
What to look for in a quote
- Is VAT in the price?
- Whether you can choose the colour
- What the cure time is
- What happens if the job turns out different
Landlord and commercial work in Molash
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
We work for landlords and letting agents as well as householders. Resealing between tenancies is a simple way to keep a property in good order.
What affects the cost of floor joint sealing
Every job gets its own quote. These are the things that affect it:
- How easy the joints are to reach
- The old material and how stubborn it is
- The number of rooms or windows
- Any working-time requirements on site
Doing several joints on one visit generally makes better use of the time than several visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
Asking for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- How many joints, rooms or windows are involved
- If someone has resealed it before
- Where the property is
- What the problem is, such as mould, gaps, leaks or cracking
Every job is quoted individually. Simply call 0345 464 0079 or email us and describe the job and send pictures if you have them.
When something else is needed
Before booking, it’s worth knowing the limits:
- Leaks from a failed tanking system
- A tiled floor that needs relaying
- Movement too big for a sealant joint
If in doubt, call 0345 464 0079 or email us and we’ll say what we think before you book.
Where we work in Molash
- Thresholds
- Commercial floors
- Concrete floor joints
- Tiled floors
- Wet room & bathroom floors
- Skirting boards
Different surfaces, different methods
Tiled floors
Perimeter joints in tiled floors should be sealant, not grout. Grout at the edge is removed and replaced with sealant.
Thresholds
Thresholds take daily traffic, so we choose a hard-wearing, flexible product.
Floor joint sealing around Molash
Across Kent, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they don’t all move the same way. The joint at the skirting or threshold has to allow for that.
Letting a property close to Wye station? Then open skirting and floor joints collect dirt and water, so seal them while the property is empty.
Molash is about 6 miles south of Faversham, in Kent. Our applicators cover floor joint sealing for homes and businesses in Molash and nearby. 922 places in Kent are on our list, large and small. Our Chelmsford page covers work nearby (39 miles or so).
All of CT4 is within our area for floor joint sealing, from the main roads to the quietest streets. Whether your property is on The Street, Pound Lane and Church Lane or anywhere close by, we can help. We also cover Shottenden (2 miles north-east), Bilting (2 miles south-east), Perrywood (3 miles north), Mountain Street (3 miles east) and Godmersham (3 miles east). We also work in nearby towns such as Ashford (6 miles south), Canterbury (9 miles north-east), Sittingbourne (11 miles north-west), Folkestone (15 miles south-east), Whitstable (10 miles north-east) and Faversham (6 miles north).
Around Molash
Typical jobs here are in homes near George Inn, among other places. The closest station to Molash is Wye station, roughly 3.2 miles south. Well-known places in the area include Tower keep castle at Chilham (2.7 miles east).
How it works
We keep the work tidy and contained to the area we’re working on. Expect the work to take a few hours, depending on the length of joint, and we explain the cure time before we leave. In a small place like Molash, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we check the joint and the floor and agree which sealant suits it.
- Whatever is in the joint now, whether caulk, grout or sealant, comes out.
- We clean and vacuum the joint and fit backing where the depth needs setting.
- We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
- We tool the joint neatly and tell you when it can be walked on and cleaned.
Before we arrive
- Mention any sign-in or site rules at work premises
- Keep children and pets away from the work area
- Clear items away from the joints we are working on
Get a quote
Need a quote? Please phone 0345 464 0079 or email us with a few details. You’ll know what we plan to do, and what it will cost, before any work begins.
Related advice
Should I try it myself first?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.