Kent · England
Molash Gutter Sealing
Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims for homes and businesses in Molash and across Kent. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Leaking gutter joints and stop ends
- Streaks down the brickwork from a leaking joint
- Earlier gutter repairs that have peeled off
Your questions about gutter sealing in Molash
Do you cover Molash for gutter sealing?
Yes, Molash is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear price.
Will you come out to Molash?
Yes, Molash is covered. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
What do you need from me for a quote?
Only a few details: the address or postcode, what’s wrong and any access issues. Then call 0345 464 0079 or email us.
Can you fit new guttering?
No. We seal leaking joints, end caps and trims. Replacement needs a gutter installer or roofer.
What about gutters on a second or third storey?
That depends on the building. Let us know the height and the ground below and we’ll confirm what’s needed.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned.
Will it make a mess?
We keep the work tidy. Nearby surfaces are protected, and we clear up when we are done.
Can sealant stop a sagging gutter leaking?
No. If the gutter sags, the joints keep opening so it needs refixing before sealing.
Gutter sealing in Molash
Across Molash, we reseal gutter joints, end caps and roofline trims. Single-storey and low gutters are simple to reach and if it’s higher up, let us know and we’ll confirm what access is needed. If you are dealing with stop ends leaking at the end of a run and garage door frames letting rain in, we can help.
Outside joints can only be sealed when they’re dry, so work in Molash is booked around the forecast. Let us know about access to every wall, plus any garages or outbuildings.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Place
- Molash (CT4)
- Region
- Kent
- Cover
- A year, on every job
- Price
- A clear price before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
When to call us in Molash
Sealant on fascias and trims weathers like any outdoor joint. It hardens, shrinks and splits after some years.
Signs it’s time to call us include:
- End caps that drip every time it rains
- Cracked sealant along roofline trims
- Wet patches on the wall under a gutter joint
- Water dripping where gutter sections meet
For landlords with property near Wye station, a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.
Questions to ask before you book
- Whether all the old sealant comes out first
- Whether they’re fully insured
- Who turns up on the day
- What product goes in the joint
The process
When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. Most jobs then take anything from an hour or two to a few hours. Somewhere like Molash needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We find where the water is coming from and check the gutter is sound.
- The old sealant and dirt are cleaned out of the joint.
- The joint is dried before sealing.
- A gutter sealant is applied to the joint.
- We check the run and clear debris near the joints.
Preparing for the visit
- Mention any tricky access
- Let us know about earlier repairs to the joints
- Keep pets and children clear of the area while we work
How to get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.
Read more
What happens if it’s left?
You don’t need to replace a garage door because rain gets in round the frame. Sealing the frame usually stops it. Where a wall is exposed, as many are in small places like Molash, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part, and we’ll explain the quote if you ask.
Why choose Mr Mastic in Molash
- White, clear, grey or another colour, product permitting
- An ARBOMaster approved applicator
- Trusted Arbo and Everbuild sealants
- One-year guarantee on every job
See what affects the cost and our reviews.
What affects the quote in Molash
We quote each job individually. These are the things that affect it:
- The amount of work
- How easy the joints are to reach
- The old material and how stubborn it is
- The type of sealant required
Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs, plus any working-time requirements on site. Call for a quick quote and we’ll go through it with you.
What to tell us for a quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- How we’d reach the joints
- Whether it has been sealed before
- The rough size of the job
- The type of property
If you are in Molash and need gutter sealing, phone 0345 464 0079 or email us. Tell us what the problem is and where, and you’ll get a clear quote before we start.
Landlord and commercial work in Molash
Housing providers, facilities teams and property managers book us too in Molash and across Kent. We can quote a run of properties together.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
How the job changes by surface
Gutter joints
A gutter joint has to cope with movement and standing water. A dedicated gutter sealant suits them.
uPVC fascias
Gaps in fascias spoil the roofline. Sealing them closes the gap.
What gutter sealing looks like in Molash
Rainfall in the South East is lower than in much of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day. Historic houses like Belmont House and Gardens (about 3.8 miles north-west) are a reminder that the area around Molash has older buildings as well as new. Where a home is older, older walls and rooflines need a sealant that moves with them and suits the material.
Homes close to Church of St Peter include some older properties, and the joints between older walls, newer extensions and the roofline need a sealant that can move.
Molash is about 6 miles south of Faversham, in Kent. Whether you are in the middle of Molash or further out, we cover gutter sealing for every kind of property. Our area takes in 922 places across Kent. There’s also a page for Chelmsford, roughly 39 miles from Molash.
Jobs for gutter sealing in CT4 is quoted and booked the same way as anywhere else. Gutter sealing is available to properties on The Street, Pound Lane and Church Lane. Other places close to Molash include Shottenden (2 miles north-east), Bilting (2 miles south-east), Perrywood (3 miles north), Mountain Street (3 miles east) and Godmersham (3 miles east). Within a short drive, we also cover Ashford (6 miles south), Canterbury (9 miles north-east), Sittingbourne (11 miles north-west), Folkestone (15 miles south-east), Whitstable (10 miles north-east) and Faversham (6 miles north).
Landmarks near Molash
We work in homes and buildings around George Inn. The nearest railway station is Wye station, roughly 3.2 miles south of the centre. A little further out are Tower keep castle at Chilham (2.7 miles east).
How to look after the new joints
Looking after new joints is easy, and it makes a real difference:
- Watch for drips in a downpour
- Keep the gutters clear of debris
- Get a dropping gutter looked at quickly
- Check that water runs out of the downpipes
Leave the new sealant to cure as we advise and avoid disturbing it.
A leaking garage frame lets water reach stored items. Resealing the frame is a quick job.