Kent · England
Gutter, fascia & soffit sealing in Sittingbourne, Kent
Problem with your gutter and fascia joints in Sittingbourne? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Open joints in fascias and soffits
- Damp patches inside below a leaking gutter
- Leaking gutter joints and stop ends
Gutter sealing in Sittingbourne, done properly
Our work covers gutter joints and end caps as well as fascias and soffits, along with roofline trims and garage door frames. It’s all about the joints rather than new guttering. If you are dealing with drips from gutter joints and end caps and wet patches on the wall under a gutter joint, we can put it right, whatever the surface.
Sittingbourne mixes older houses and their gutters with newer estates of brick, render and uPVC trims. Gutter joints, fascia trims and the movement joints in newer brickwork all need sealant that can flex.
Our work is backed for twelve months.
- Place
- Sittingbourne (ME10, ME9)
- Region
- Kent
- Guarantee
- A year, on every job
- Quote
- A clear price before we start
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
What affects the quote in Sittingbourne
We don’t publish a price list, because no two jobs are the same. What we look at:
- The size of the job
- The type of sealant required
- How easy the joints are to reach
- How much old sealant there is and how hard it is to remove
What you pay reflects the work, not guesswork. That’s why we ask about the job first and agree the price before starting.
Helping us quote
Photos help, but a description is a good start. Please mention:
- The address or postcode of the job
- Roughly how big the job is
- Any access issues, like height or stairs
- Pictures of the joints, sent by email
For a quote, phone 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We’ll give you a clear quote before any work starts.
Outside joints around Sittingbourne
Sittingbourne is within about 2 miles of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on gutter, fascia and roofline joints, which can dry out and crack sooner where a building faces the weather. London and the South East are among the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Schools such as Borden Grammar School are buildings too, and larger buildings have long runs of movement joint that eventually need resealing. If you let a flat or house near Sittingbourne station, leaking gutter joints on a rental are best caught before they stain the walls. If you live in an older home near Church of the Holy Trinity, the joints between older walls, newer extensions and the roofline need a sealant that can move.
Sittingbourne is about 37 miles east of London, in Kent. Across the ME10 area, we can carry out gutter sealing at your property. Sittingbourne is one of 922 towns and villages in Kent where we work. Chelmsford is on our list too, about 29 miles from Sittingbourne.
We cover every part of the ME10 and ME9 postcode area for gutter sealing. If you need gutter sealing at a property on High Street, Roman Square and Moonstone Square or a nearby road, we can help. Sittingbourne is on the A2 and A249, which makes it straightforward to reach. If you’re just outside Sittingbourne, we cover Murston (1 mile east), Milton Regis (1 mile north-east), Kemsley (1 mile north), Howt Green (1 mile north-west) and Heart's Delight (1 mile south-west). Further out, we also cover Maidstone (10 miles south-west), Ashford (15 miles south), Whitstable (13 miles east), Faversham (7 miles east), Minster (6 miles north-east) and Kings Hill (15 miles west). As one of the bigger places in Kent, Sittingbourne has homes, rented property and businesses of every kind.
What’s near Sittingbourne
We work in homes and buildings around Milton Court Primary Academy, The Golden Hope pub and Milton Creek Country Park. There’s a railway station in Sittingbourne itself: Sittingbourne station. A little further out are Bayford Court (under half a mile east) and Court Hall Museum (less than half a mile north).
For landlords and businesses
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
We work for landlords and agents as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order before the next move-in.
Questions from Sittingbourne
Can you help a landlord with a rental near Sittingbourne station?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or drop us an email and tell us about the property, and we’ll send you a clear quote.
Is gutter sealing in a coastal place like Sittingbourne any different?
Coastal homes put outside sealant through more weather than inland ones, so preparation and the right sealant matter all the more. It’s worth checking the walls that face the sea first.
Is it messy?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
Is the work guaranteed?
Our 12-month guarantee applies to all our work.
Should I try DIY first?
That depends on the joint. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.
How long does gutter sealing take?
Typically it takes anything from an hour or two to a few hours. Bigger jobs take longer, and we will tell you how long to expect.
Do the sealants smell?
Possibly a little. It fades as the sealant cures.
How long before the joint can be used?
Most sealants are touch-dry well before they’re fully cured. We’ll tell you how long to leave the joint.
Surface by surface
Garage door frames
Frame-to-brick joints face the weather. An exterior sealant suits them.
Gutter joints
Joints between gutter lengths are the most common leak point. They’re cleaned out, dried and resealed.
Places near Sittingbourne
What else we do in Sittingbourne
Why it’s worth doing now in Sittingbourne
If the problem is a blocked downpipe, sealing will not help. We look at what’s really happening and point you to the right trade if needed. In Sittingbourne, as anywhere, most leaks start as a small gap in a joint, and they’re far easier to fix early.
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please ring 0345 464 0079 or drop us an email and we’ll talk you through it.
Why book with us
- Anti-fungal silicone where joints get wet
- 180+ five-star Google reviews
- We’re fully insured
- Arbo and Everbuild products
See our cost guide and what customers say.
DIY sealant or a professional job?
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
How the visit works
There’s no need to move everything out before we come, only the area right around the joints. Everything nearby is protected, and the job takes a few hours, depending on the number of joints and the access for a typical job. A visit in Sittingbourne needs access to the work and a place to park close by. If the job is outside, mention gates, side access and anything above ground floor.
- First we trace the drip and check the gutter isn’t damaged.
- We remove the old sealant and clean the joint.
- We dry the joint so the new sealant can bond.
- We seal the joint with a sealant made for gutters.
- We check the run and clear debris near the joints.
Preparing for the visit
- Mention if the joints have been sealed before
- Let us know about stairs, lifts or work at height
- Mention any sign-in or site rules at work premises
Get a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we will talk you through what we’d do. When it suits you, ring 0345 464 0079 or drop us an email.
Related advice
Aftercare tips
No joint lasts for ever, but care makes a real difference. Our tips:
- Look along the fascias for open joints
- Clear leaves and moss from the gutters
- Check that water runs out of the downpipes
- Watch for drips in a downpour
Keep the gutters clear of leaves and moss, so water drains away past the joints. Standing water strains every seal.
If an end cap is dripping, deal with it before winter. Water down the wall all winter can cause damp inside.