Kent · England
Regrouting in Sittingbourne, Kent
Regrouting across Sittingbourne and nearby, with old sealant always removed completely and a 12-month guarantee.
- Cracked grout along the bath or tray
- Kitchen splashback grout stained by grease
- Cracked or crumbling grout lines
Regrouting for homes and businesses in Sittingbourne
Our applicators rake out the old grout to an even depth, taking care not to chip the tile edges. After vacuuming, new grout goes in and the tiles are wiped clean, and the corners get fresh silicone. If you have greasy, stained grout behind the hob and floor grout that has worn and darkened, we can help.
Homes around Sittingbourne have been extended and refitted over the decades, some more than once. Sealant run over the top of an old bead is a common cause of leaks and mould, so we take every joint back to clean before anything new goes in.
The work is covered for a year after we finish. If anything is not right with it, phone 0345 464 0079 or email us.
- Place
- Sittingbourne (ME10, ME9)
- Wider area
- Kent
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Bathrooms and kitchens in Sittingbourne
Sittingbourne is within about 2 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. There are hotels and other places to stay in and around Sittingbourne. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room.
In the older streets around Church of the Holy Trinity, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. For landlords with property near Sittingbourne station, a regrout while the flat is empty is quicker than working around a tenant.
Sittingbourne is about 37 miles east of London, in Kent. Anywhere in ME10, our applicators can take on regrouting. Our area takes in 922 places across Kent, large and small. Our Chelmsford page covers work nearby.
Every address in ME10 and ME9 is within our area for regrouting. That includes homes and businesses on High Street, Roman Square and Moonstone Square and the roads around them. Being close to the A2 and A249, Sittingbourne is simple for us to get to. Nearby, we also carry out regrouting in Murston (1 mile east), Milton Regis (1 mile north-east), Kemsley (1 mile north), Howt Green (1 mile north-west) and Heart's Delight (1 mile south-west). Within a short drive, we also cover Maidstone (10 miles south-west), Ashford (15 miles south), Whitstable (13 miles east), Faversham (7 miles east), Minster (6 miles north-east) and Kings Hill (15 miles west). Sittingbourne is among the bigger towns we cover in Kent.
Near you in Sittingbourne
Locally, jobs take us to homes and businesses close to Milton Court Primary Academy, The Golden Hope pub and Milton Creek Country Park. Sittingbourne has its own railway station: Sittingbourne station. Other landmarks nearby include Bayford Court (less than half a mile east) and Court Hall Museum (less than half a mile north).
How it works
We bring everything the job needs with us, so there’s nothing for you to buy. Once we have agreed what’s being done, the area is protected and the work begins. Most jobs take a few hours, or longer for a fully tiled room. Parking in a town like Sittingbourne is generally straightforward, but tell us if there’s a driveway or any restrictions, and let us know if the work is upstairs, in a flat or up high outside.
- Every tile area is checked for hollow or loose tiles first.
- The old grout is removed to an even depth.
- The joints are vacuumed clean.
- We regrout the joints and clean the tile faces.
- We finish with silicone in the moving joints.
Getting ready for the visit
- Let us know about parking restrictions
- Tell us about any previous sealing or DIY attempts
- Clear items away from the joints we are working on
Getting a quote
Asking for a quote is easy: let us know the job and the location. Photos by email help us understand the job, and we’ll take it from there.
Related advice
Do you need regrouting in Sittingbourne?
A bathroom that stays damp keeps the grout wet, and damp grout is where mould grows. Black marks that come back after cleaning are often in the grout itself.
Signs it’s time to call us include:
- Splashback grout that has darkened
- Old grout in a dated colour
- Grout that’s cracking and breaking up
- Gaps where the shower grout has gone
If you look after a building such as Borden Grammar School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
What to look for in a quote
- The length of the guarantee
- Who turns up on the day
- Which sealant they’ll use, and why
- What the quote includes, VAT included or not
Landlord and commercial work in Sittingbourne
Housing providers, facilities teams and property managers book us too. Several sites can be quoted together, and we’re fully insured.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
How the job changes by surface
Corners and edges
We reseal edges at the same time as regrouting, so everything is renewed at once.
Bathroom wall tiles
We can regroute all the walls in a bathroom, depending on size. It’s a good time to change the grout colour.
What affects the quote in Sittingbourne
The quote reflects the job in front of us. We look at:
- Any working-time requirements on site
- Whether there’s mould to deal with
- How many rooms, windows or areas are involved
- The type of sealant required
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
Helping us quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- A few pictures by email, if you can
- How we’d reach the joints
- Whether it’s a home or a business
- Roughly how big the job is
Need a quote? Please ring 0345 464 0079 or email us with a few details. We’ll explain what we’d do and give you a clear price before work begins.
DIY versus a professional finish
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Sittingbourne: your questions answered
I let a flat near Sittingbourne station. Can you help?
Yes, we work for landlords and letting agents. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before we start.
Do you take on hotel work around Sittingbourne?
Yes, hospitality work, including hotels, is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
Do I have to be there?
Access is agreed with you when the job is booked. Indoors, that normally means someone at home.
Can you regrout if a few tiles are loose?
Loose tiles need refixing before regrouting. We will show you which ones before any grout comes out.
What goes in the corners, grout or silicone?
Flexible sealant. Grout belongs between the tiles, while corners and edges need a joint that can move.
Do you take out the old sealant first?
Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.
Do you cover Sittingbourne?
Yes. We are based in Crawley and work across South East England, London and Scotland.
Can new sealant go over the old?
No, and we never do. It can look neat for a few weeks, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
Nearby places to Sittingbourne
More services for Sittingbourne
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Keep an eye on the silicone along the edges
- Clean with a soft brush, not anything metal
- Rinse the tiles after showering
- Wipe water off the walls when you are done
If a tile starts to feel loose, get it looked at early. A loose tile cracks the grout around it and lets water in.
Grout that is washing out of a shower shouldn’t be left. Each shower drives water into the open joints and it can end up in the wall or the ceiling below.