Kent · England
Gutter Sealing in Murston
Gutter sealing in Murston from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Old gutter sealant that has let go
- Open joints in fascias and soffits
- Leaking gutter joints and stop ends
Do you need gutter sealing in Murston?
Sealant on fascias and trims weathers like any outdoor joint. It goes hard, cracks and pulls away after some years.
Any of these means the joints need attention:
- End caps that drip every time it rains
- Failed sealant on a garage door frame
- Internal damp traced to a gutter joint
- Water dripping where gutter sections meet
Letting a property close to Sittingbourne station? Then a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking.
Before you book anyone
- How hidden problems are handled
- Whether VAT is included
- Is the old sealant removed completely?
- Whether the sealant suits the joint
Gutter sealing in Murston, done properly
Failed sealant round a garage door frame lets rain blow in. The frame joint is cut out and resealed using a sealant made for outdoor use. Typical jobs include rain getting in around a garage door and cracked sealant along roofline trims, across gutter joints, garage door frames and roofline trims.
Houses in smaller places like Murston can stand more in the open than those in a built-up town, and walls and rooflines facing the weather take the worst of it. That’s where gutter joints and wall joints tend to fail first.
We guarantee the work for a year. If something is not right with it in that time, tell us and we will put it right.
- Where
- Murston (ME10, ME9)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
What happens on the day
We bring everything the job needs with us, so you don’t need to buy or prepare anything. Once we have agreed what’s being done, we protect the area and start. It normally takes an hour or two for a few joints, longer for a full run. For a job in Murston, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We find where the water is coming from and check the gutter is sound.
- We remove the old sealant and clean the joint.
- The joint is dried before sealing.
- A gutter sealant is applied to the joint.
- We check the run and clear debris near the joints.
Preparing for the visit
- Tell us about any previous sealing or DIY attempts
- Tell us if parking is tricky
- Keep children and pets away from the work area
Get a quote
We don’t publish a price list, because every job is different. Instead, we give you a clear price for your job. To arrange one, ring 0345 464 0079 or email us.
Related advice
Why it’s worth doing now in Murston
A dripping gutter joint keeps wetting the same patch of wall. Left, it can stain walls and lead to damp so early sealing is worthwhile. In an older home around Murston, damp from a failed joint can get into timber and plaster, which is far harder to put right than the sealant itself.
A failed joint rarely gets cheaper to fix by waiting. If you are not sure whether it needs doing, ring 0345 464 0079 or drop us an email and we will give you an honest view and a quote.
Why us?
- We leave the area clean and tidy
- Quality sealants from Arbo and Everbuild
- Rated 4.9 stars on Google
- Sealant colour chosen to suit
For landlords and businesses
We work for landlords and letting agents as well as homeowners. Resealing between tenancies keeps a property looking cared for before the next move-in.
For anyone letting property in or around Murston, jobs at different addresses can go on one quote. Send us the addresses and the work at each.
What gutter sealing looks like in Murston
Murston is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That’s hard on gutter, fascia and roofline joints, especially on the side facing the sea. London and the South East are among the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
If you live in an older home near Church of All Saints, the joints between older walls, newer extensions and the roofline need a sealant that can move. If you look after a building such as Sunny Bank Primary School, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
Murston is about 1 mile east of Sittingbourne, in Kent. We provide gutter sealing to householders, landlords and businesses in Murston and the surrounding area, as part of our work across Kent. Our Kent coverage runs to 922 places, and Murston is one of them. We also work in Chelmsford, around 30 miles away.
All of ME10 and ME9 is covered for gutter sealing, from the main roads to the quietest streets. If you need gutter sealing at a property on Oak Road, Glebe Lane and Leigh Road or a nearby road, our applicators can take on the job. We also cover the places around Murston: Milton Regis (1 mile north), Sittingbourne (1 mile west), Tonge Corner (1 mile east), Rodmersham (1 mile south) and Kemsley (1 mile north). Within a short drive, we also cover Maidstone (11 miles south-west), Ashford (15 miles south), Canterbury (15 miles east), Whitstable (12 miles east), Faversham (6 miles east) and Minster (6 miles north).
Local landmarks in Murston
We work in homes and buildings around Sittingbourne Community College, Milton Creek Country Park and The New Inn. For rail, the closest station is Sittingbourne station, about 0.7 miles west of the centre. A little further out are Sittingbourne Heritage Museum (within half a mile west) and Bayford Court (within half a mile west).
What sealant work cannot fix
Some problems need a builder, plumber or other trade rather than us:
- Brackets that have snapped or loosened
- Boards that have decayed or split
- Guttering that needs replacing
If you’re not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer before booking.
What we seal
- uPVC fascias
- Gutter joints
- Garage door frames
- Roofline trims
- Soffit joints
- Gutter end caps
Surface by surface
uPVC fascias
Fascia board joints can open up. They’re sealed tidily in a suitable colour.
Soffit joints
We choose a sealant colour that suits the soffit.
Places near Murston
Also in Murston
How we quote for gutter sealing
Call for a quick quote. The main things that affect it are:
- The number of rooms or windows
- Which sealant suits the joint
- Whether the work is at height
- Whether there’s mould to deal with
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
Helping us quote
When you contact us, it’s useful to know:
- Whether it has been sealed before
- Roughly how big the job is
- Any access issues, like height or stairs
- Where the job is, and your postcode
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email photos if that’s easy.
Questions from Murston
Is Murston within the area you cover?
Yes. Murston is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you work for landlords with property near Sittingbourne station?
Yes, rental work is part of what we do. You can call 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before work begins.
Is it OK to seal over old sealant?
No, and we never do. It may look fine at first, but the new layer lifts away from the old one. The old sealant has to come out completely.
Will it make a mess?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
Do you hold any approvals?
Yes. We are an ARBOMaster approved applicator.
Do you replace gutters or fascias?
No, we reseal joints, end caps and trims. Replacement needs a gutter installer or roofer.
Are you fully insured?
Yes, we’re fully insured for every job we do.
How long does gutter sealing take?
A typical job takes an hour or two for a few joints, longer for a full run, including the preparation. Your quote will say how long we expect yours to take.