Kent · England
Remedial Sealant in Murston
Remedial sealant in Murston from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Products that weren’t meant for the joint
- Worktop sealant that has shrunk and split
- Leaks that keep coming back after resealing
Honest limits
Sealant is not the answer to every problem, and we’d rather say so up front. Sealant will not put right:
- A bath, tray or worktop that moves until it’s properly fixed
- Tiles that have come away from the wall
- Sealant in an older building that needs testing for asbestos first
If in doubt, ring 0345 464 0079 or drop us an email and we’ll say what we think.
What we seal
- Failed movement joints
- Expansion joints
- Leaking tray & enclosure joints
- Botched or over-sealed joints
- Shrunken worktop sealant
- Mouldy bath & shower sealant
About our remedial sealant in Murston
Decorators’ caulk in a shower, bathroom silicone on a window, a rigid filler in a movement joint fails however neatly it’s applied. Out it comes, and in goes a sealant suited to the job. We work on botched or over-sealed joints, leaking tray & enclosure joints and shrunken worktop sealant, and common reasons people get in touch are beads that never stuck properly and a shower that leaks however often it’s resealed.
In a smaller place like Murston, homes are mostly houses and bungalows rather than flats, some older and some much newer. Sealant and grout wear out here just as they do in a big town.
The work is covered for a year after we finish. If there’s a problem with it, please ring 0345 464 0079 or send us an email.
- Where
- Murston (ME10, ME9)
- Region
- Kent
- Guarantee
- One year on every job
- Price
- A clear price before work begins
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
How to look after the new joints
Simple care keeps the joints in good condition. Our advice:
- Report a tray that rocks or a worktop that lifts
- Keep the room well ventilated
- Don’t add new sealant on top of old
- Get the cause of a repeat leak found before resealing
Leave the new joint to cure fully before it gets wet or moves: generally around 24 hours, or as long as we advise.
If a joint has failed more than once, stop resealing it. Have someone find out why, otherwise the next attempt will fail too.
What remedial sealant looks like in Murston
Murston is within about 2 miles of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Schools such as Sunny Bank Primary School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s. For an older house near a landmark such as Church of All Saints, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Letting a property close to Sittingbourne station? Then failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Murston is about 1 mile east of Sittingbourne, in Kent. Every kind of property in Murston is covered for remedial sealant, old or new, large or small. Every job comes with our 12-month guarantee. Murston is one of 922 places in Kent where we work for remedial sealant. We also work in Chelmsford, about 30 miles from Murston.
Here we cover the ME10 and ME9 postcode area for remedial sealant. Local streets include Oak Road, Glebe Lane and Leigh Road, and we cover them all. If you are just outside Murston, we cover Milton Regis (1 mile north), Sittingbourne (1 mile west), Tonge Corner (1 mile east), Rodmersham (1 mile south) and Kemsley (1 mile north). We also work in nearby towns such as Maidstone (11 miles south-west), Ashford (15 miles south), Canterbury (15 miles east), Whitstable (12 miles east), Faversham (6 miles east) and Minster (6 miles north).
Around Murston
Typical jobs here are in homes near Sittingbourne Community College, Milton Creek Country Park and The New Inn and the streets around them. The closest station to Murston is Sittingbourne station, about 0.7 miles west. A little further out are Sittingbourne Heritage Museum (less than half a mile west) and Bayford Court (within half a mile west).
Murston: your questions answered
Is Murston within the area you cover?
Yes. Murston is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for hotels and guest houses in Murston?
Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.
What does remedial sealant cost?
Size, access and the old material all affect the cost. Ask us for a quote.
How long will it take to strip and reseal the joint?
That depends on how many layers there are and how many joints. We’ll tell you before we start.
What information do you need?
Only a few details: where it is, what you’ve noticed and how we reach it. After that, simply phone 0345 464 0079 or drop us an email.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Where are you based?
Mr Mastic is based in Crawley. We cover Murston and the rest of Kent.
Can you take off two layers of silicone?
Yes. Stripping layered sealant takes longer than a normal reseal, but it’s the only way the new joint will last.
Why deal with it now?
A failed seal rarely means a new bathroom. If the bath, tray and tiles are sound, remedial resealing generally puts it right. Where something else has failed, you will hear it from us. Around Murston, water from a failed joint in an older home can soak into timber and plaster, and that’s a much bigger job than renewing the sealant.
Combining jobs into one visit usually makes better use of the time than several visits. You will get one clear quote for the whole job.
Why us?
- White, clear, grey or another colour, product permitting
- We agree the colour with you first
- Tidy, careful work
- 4.9 on Google from 180+ five-star reviews
Read how sealant jobs are priced and customer reviews.
Work for landlords, hotels and businesses
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
Surface by surface
Over-sealed & botched joints
Thick, smeared sealant looks messy and hides problems. We strip it back so we can see the joint, then reseal neatly.
Movement & expansion joints
Some movement joints have been filled with mortar or grout. We rake that out where it can be removed and seal with a flexible product.
What happens on the day
Before we leave, we go over the finished joints with you and explain the cure time. The visit itself generally takes a few hours for most joints, depending on how much old sealant has to come out, depending on how much there is to do. In a smaller place like Murston, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- First we find out how and where the joint has failed.
- Every layer of old sealant is cut and cleaned out.
- We clean the joint, treat any mould and let it dry.
- Where the joint moves, backing and a flexible sealant suited to the movement go in.
- Finally we finish the joint and talk you through what we found.
Preparing for the visit
- Mention if the joints have been sealed before
- Clear the area around the work
- Let us know if you’ve seen damp or leaks
Get a quote
We quote each job on its own, so the first step is telling us about yours. Simply ring 0345 464 0079 or email us and describe the job and send pictures if you have them.
Related advice
Places near Murston
More services for Murston
What affects the cost of remedial sealant
For a quick quote, just ask. The main things that affect it are:
- When we can work, for business premises
- Whether old sealant or filler has to be cut out
- Mould in or behind the old joints
- How many areas need sealing
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Call for a quick quote and we’ll explain what it covers.
What to tell us for a quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- Any previous sealing or DIY work
- The type of property
- Any access issues, like height or stairs
- What the problem is, such as mould, gaps, leaks or cracking
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. When it suits you, phone 0345 464 0079 or send us an email.