Kent · England
Remedial sealant & repairs in Kemsley, Kent
Removing failed, mouldy or leaking sealant and putting it right for homeowners, landlords and businesses in Kemsley. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Worktop sealant that has shrunk and split
- Over-sealed joints coming away
- Sealant peeling off a dusty or damp surface
Landlord and commercial work in Kemsley
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.
We regularly work with letting and managing agents. Tell us the address, the job and how access works.
How we handle remedial sealant in Kemsley
If a joint fails again and again, something is causing it. Movement, the wrong product or a leak from somewhere else will defeat even a perfect bead. We look for the cause before we reseal. We work on expansion joints, botched or over-sealed joints and failed movement joints, and common reasons people get in touch are wide, uneven beads that look worse than the old ones and caulk or the wrong sealant used in a wet area.
Even in a smaller place like Kemsley, bathrooms and kitchens see heavy daily use. Older or newer, every room gets the same approach: all the old material out, the joint cleaned and dried, then new sealant or grout.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Place
- Kemsley (ME10, ME9)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Price
- A clear price before work begins
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
FAQs for Kemsley
Do you cover smaller places like Kemsley?
Yes, Kemsley is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
I let a flat near Kemsley station. Can you help?
Yes. We work for letting agents and landlords as well as homeowners. You can ring 0345 464 0079 or drop us an email with the details for a clear quote.
Is there any odour?
Possibly a little. It fades as the sealant cures.
What happens if the problem is the tray or the plumbing?
Then we explain what we’ve found. A plumber or fitter may be needed before any new sealant goes on.
Do you work for hotels and businesses?
Yes. Commercial and hotel work is a large part of what we do. We can talk about working times when we quote.
Someone resealed my shower and it’s leaking again. Can you help?
Yes. First we check whether the leak is the sealant at all, then strip and reseal the joints.
Do you guarantee remedial jobs?
Yes, with our 12-month guarantee. Where we have flagged another fault, it needs fixing for the joint to last.
Can you remove old sealant without damaging the bath?
Yes. We avoid heavy scraping and use the right cleaner for each surface, so the new sealant bonds cleanly.
Do you need remedial sealant in Kemsley?
Products get mixed up: caulk where it gets wet, rigid sealant where things move, or an acetoxy silicone on a surface it can mark. Each fails in its own way.
Look out for these signs:
- Floor or wall movement joints that have failed
- Leaks that keep coming back after resealing
- Products that weren’t meant for the joint
- Sealant peeling off a dusty or damp surface
If you look after a building such as Kemsley Primary Academy, we reseal washrooms and kitchens in schools and businesses as well as homes.
Comparing quotes
- Whether all the old sealant comes out first
- Is VAT in the price?
- What insurance they hold
- How much experience the applicator has
The process
Most of a good job is in the preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours for most joints, depending on how much old sealant has to come out. Parking around Kemsley is generally easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- We start by checking the joint for movement, leaks and the reason it failed.
- We strip the joint completely, removing any layers below.
- Next, any mould is treated and the joint dried.
- Where the joint moves, backing and a flexible sealant suited to the movement go in.
- The new joint is tooled neatly and we explain anything else we found.
How to prepare
- Try not to wet indoor joints just before the visit
- Mention any sign-in or site rules at work premises
- Clear the area around the work
Ask for a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will explain how we’d tackle it. Whenever you are ready, phone 0345 464 0079 or send us an email.
Advice
Bathrooms and kitchens in Kemsley
Kemsley is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Kemsley has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
If you live in an older home near Parish Church of the Holy Trinity, older homes can move a little, which is hard on rigid grout and tired sealant. Rented homes near Kemsley station change hands often, and failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Kemsley is about 1 mile north of Sittingbourne, in Kent. Anywhere in ME10, we can carry out remedial sealant at your property. We cover 922 towns and villages across Kent. There’s also a page for Chelmsford, about 28 miles away.
All of ME10 and ME9 is covered for remedial sealant. You will find streets such as Court Road, Menin Road and Hurst Lane, all of which we cover. Neighbouring places we cover for remedial sealant include Howt Green (1 mile west), Milton Regis (1 mile south-east), Sittingbourne (1 mile south), Iwade (1 mile north-west) and Murston (1 mile south). Within a short drive, we also cover Maidstone (11 miles south-west), Whitstable (13 miles east), Faversham (7 miles south-east), Minster (5 miles north-east), Davington (7 miles south-east) and Foley Park (10 miles south-west).
Near you in Kemsley
In Kemsley, that means homes and buildings near Milton Creek Country Park, The Three Hats Inn and Borden Grammar School. Kemsley has its own railway station: Kemsley station. Other landmarks nearby include Castle Rough (0.6 miles east) and Court Hall Museum (0.8 miles south-west).
Quotes for remedial sealant in Kemsley
We quote each job individually. This is what makes a difference:
- Which sealant suits the joint
- The number of rooms or windows
- The old material and how stubborn it is
- How easy the joints are to reach
What it costs depends on the size of the job, how hard the old material is to remove and access to the work. We give a clear quote before we start, so you know where you stand.
Asking for a quote
You do not need to know the technical terms. Just tell us:
- Any access issues, like height or stairs
- Whether it’s a home or a business
- A few pictures by email, if you can
- How many joints, rooms or windows are involved
If you’re in Kemsley and need remedial sealant, ring 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and you will get a clear quote before we start.
DIY sealant or a professional job?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Places near Kemsley
More services for Kemsley
What we cannot put right
Sealant isn’t the answer to every problem, and we’d rather say so up front. It will not solve:
- Sealant in an older building that needs testing for asbestos first
- A tray or worktop that needs refixing first
- A cracked shower tray or bath (that needs repair or replacing)
If in doubt, call 0345 464 0079 or drop us an email and we’ll say what we think before you book.
Surfaces we seal
- Leaking tray & enclosure joints
- Expansion joints
- Mouldy bath & shower sealant
- Botched or over-sealed joints
- Shrunken worktop sealant
- Failed movement joints
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Use a soft cloth, not a scourer, on silicone
- Keep the room well ventilated
- Always have old sealant cut out, not covered
- Keep an eye on the ceiling below the bathroom
If we’ve found a cause, such as a loose tray or a leaking waste, get it fixed, because the new sealant can’t hold back a problem underneath.
A failing joint rarely gets better on its own. Each use pushes more water behind the bead, into floors, walls or ceilings. Early action keeps it to a sealant job.