Kent · England
Bathroom Resealing in Kemsley
Bathroom resealing in Kemsley from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Damp behind the bath or under the tray
- Black mould in the silicone that won’t clean off
- A reseal done over the top of the old bead
Bathroom resealing in Kemsley, done properly
Sealant that’s mouldy, cracked or peeling is worth sorting before it lets water through. A photo of the joints helps when you phone 0345 464 0079 or email us, and you’ll get a clear quote for bathroom resealing in Kemsley. If you have a bead that has pulled away from the tiles and smears of silicone across the tiles, we can put it right, on baths, shower trays & enclosures and basins & vanity units alike.
Around Kemsley, you will mostly find houses and bungalows, from older cottages to newer builds. Bathrooms and kitchens here get the same daily wear as anywhere, and the sealant and grout show it first.
There’s a 12-month guarantee on every job, whatever its size.
- Location
- Kemsley (ME10, ME9)
- Wider area
- Kent
- Cover
- A year, on every job
- Quotes
- A clear price before we start
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Why deal with it now?
You do not need a new bathroom because the sealant looks bad. A new bead often brings the whole room back, as long as the fittings themselves are sound. If we find a deeper problem, you will hear it from us. Homes in smaller places like Kemsley can face more weather, and failed outside joints let damp into walls. Indoors, a failed seal lets water into floors and panels as it would anywhere.
The cost reflects the work involved, not guesswork. That is why we ask about the job first and send you a clear quote before work begins.
Why us?
- Domestic, commercial and hotel work
- 12-month guarantee on every job
- We never seal over old sealant
- ARBOMaster approved applicator
Read our cost guide or customer reviews.
Looking after it afterwards
A little care helps the new joints last. We recommend:
- Avoid abrasive pads on the sealant
- Squeegee the walls and tray after use
- Clean with a mild bathroom cleaner and a soft cloth
- Give the silicone its full cure time
Wipe up standing water along the worktop joint and keep hot pans off the bead. The drier the joint stays, the longer it lasts.
Do not wait for a refit to deal with failed sealant. Like paintwork, sealant needs renewing from time to time, and renewing it as soon as it fails protects everything around it.
What bathroom resealing looks like in Kemsley
Kemsley is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Letting a property close to Kemsley station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. Schools such as Kemsley Primary Academy are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Homes close to Parish Church of the Holy Trinity include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Kemsley is about 1 mile north of Sittingbourne, in Kent. Every kind of property in Kemsley is covered for bathroom resealing. The work is guaranteed for a year. Kemsley is one of 922 towns and villages in Kent we cover for bathroom resealing. You can also see our page for Chelmsford, about 28 miles away.
We cover every part of the ME10 and ME9 postcode area for bathroom resealing. Whether your property is on Court Road, Menin Road and Hurst Lane or anywhere close by, our applicators can take on the job. Other places close to Kemsley include Howt Green (1 mile west), Milton Regis (1 mile south-east), Sittingbourne (1 mile south), Iwade (1 mile north-west) and Murston (1 mile south). Within a short drive, we also cover Maidstone (11 miles south-west), Whitstable (13 miles east), Faversham (7 miles south-east), Minster (5 miles north-east), Davington (7 miles south-east) and Foley Park (10 miles south-west).
Local landmarks in Kemsley
Around Kemsley, our work takes us to homes and buildings near Milton Creek Country Park, The Three Hats Inn and Borden Grammar School. There’s a railway station in Kemsley itself: Kemsley station. A little further out are Castle Rough (0.6 miles east) and Court Hall Museum (0.8 miles south-west).
Kemsley: your questions answered
Is Kemsley within the area you cover?
Yes, Kemsley is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you take on hotel work around Kemsley?
Yes. Hotel and guest-house work is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
Can tenants book the work?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Is there any odour?
Sometimes, a little. Any smell clears as the sealant cures, and ventilation helps.
Can you reseal around my kitchen sink and worktop?
Yes. We reseal worktop upstands, sinks and splashbacks, with a sealant suited to kitchens, colour-matched where it shows.
Will it make a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
Do you have insurance?
Yes, we are fully insured for domestic and commercial work.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
What the job involves on each surface
Kitchen worktops & upstands
Upstands and back edges are cut out, cleaned of grease and resealed, since cooking leaves a film that stops silicone sticking. The extra cleaning is what makes the bead last.
Sinks & splashbacks
Around the sink, we use a product suited to kitchens, including a food-safe sealant where that’s needed. The bead is finished smooth so it wipes clean.
Nearby places to Kemsley
What else we do in Kemsley
Quotes for bathroom resealing in Kemsley
The quote reflects the job in front of us. We look at:
- How many rooms, windows or areas are involved
- Any mould that needs treating
- The number and length of the joints
- Whether old sealant or filler has to be cut out
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all make a difference.
Helping us quote
There’s no need for technical detail. Just tell us:
- Pictures of the joints, sent by email
- What the problem is, such as mould, gaps, leaks or cracking
- Access, such as stairs, a lift or height
- Whether it has been sealed before
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.
What happens on the day
When we get to you, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes two to three hours for a typical bath, depending on how much old sealant there is. In a smaller place like Kemsley, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- Next, the joint is cleaned and any mould is treated.
- We let it dry fully and fill the bath with water before sealing.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- Finally we tidy up and explain the cure time before we leave.
Getting ready for the visit
- Keep children and pets away from the work area
- Mention any parking rules near the property
- Mention if the joints have been sealed before
Get a quote
Asking for a quote is easy: let us know what needs doing and where and its rough size. Photos by email help us understand the job, and we’ll take it from there.
Related advice
When something else is needed
Honest advice matters more to us than a booking, so here’s what sealant can’t fix:
- Cracks in the tray itself rather than the joint
- Loose or hollow tiles, or failed tanking behind them
- A leaking waste, trap or valve
If in doubt, phone 0345 464 0079 or send us an email and we’ll say what we think.
What we seal
- Wet rooms
- Shower trays & enclosures
- Kitchen worktops & upstands
- Baths
- Sinks & splashbacks
- Basins & vanity units
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.