Kent · England
Bathroom Resealing in Tonge
Our applicators work in Tonge on bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly and a 12-month guarantee.
- Gaps between the worktop and the wall
- Smears of silicone across the tiles
- Sealant that has split, shrunk or peeled away
Questions from Tonge
Will you come out to Tonge?
Yes, Tonge is covered. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Can you help a landlord with a rental near Teynham station?
Yes, we work for landlords and letting agents. Just ring 0345 464 0079 or drop us an email and tell us about the property, and we’ll give you a clear quote.
Will it make a mess?
Tidy work is part of the job. We protect what’s around the joints.
Does someone need to be in?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Do you have insurance?
Yes, we’re fully insured for domestic and commercial work.
How long before the new sealant can get wet?
Around 24 hours is typical, and we confirm the time for the product used. Getting it wet too early can spoil the new joint.
Can you quote for more than one area?
Yes. Tell us about everything you’d like done and we will quote it together.
Are you an approved applicator?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
About our bathroom resealing in Tonge
Resealing is a small job that makes a big difference. Mouldy silicone makes even a new bathroom look neglected, and a clean white or clear joint fixes it quickly. Just as important, it closes the gaps water would otherwise get through. If you have black mould in the silicone that won’t clean off and sealant that has split, shrunk or peeled away, we can help, on basins & vanity units, kitchen worktops & upstands and shower trays & enclosures alike.
In a village or hamlet like Tonge, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Where
- Tonge (ME9)
- Region
- Kent
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
What affects the cost of bathroom resealing
Some jobs are bigger than they look, and some smaller. What affects the quote:
- The amount of work
- The product the joint needs
- Whether the work is at height
- Any mould that needs treating
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
Asking for a quote
When you call or email, these details help:
- Roughly how big the job is
- Photos by email, if that is easy
- Any previous sealing or DIY work
- How we’d reach the joints
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. When it suits you, call 0345 464 0079 or email us.
Leave it or put it right?
Leaving a split or mouldy bead only stores up trouble. Water that gets behind a bath soaks into the floor, the panel and sometimes the ceiling below, turning a small job into a building repair. In a small place like Tonge, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Combining jobs into one visit is generally more efficient than separate visits. You’ll get one clear quote for the whole job.
What you get with us
- Homes, businesses and hotels
- 12-month guarantee on every job
- You choose the colour before work begins
- Colour picked to suit the job
See what affects the cost and our reviews.
How the job changes by surface
Kitchen worktops & upstands
Water behind a laminate worktop can make the edge swell. A sound joint along the back edge stops that, as long as the worktop itself is firmly fixed.
Sinks & splashbacks
Splashbacks in glass, tile or acrylic meet the worktop in a long joint. It’s resealed in white, clear or a colour to suit.
Common problems we fix in Tonge
A bath shifts a little every time it’s filled and emptied. An acrylic bath flexes under load, and a tray that is not fully bedded can rock. That movement works at the bead until it splits or peels away.
The most common problems we see are:
- Black mould in the silicone that will not clean off
- A reseal done over the top of the old bead
- Lumpy, uneven sealant from a DIY attempt
- Failed sealant on the screen profile
If you look after a building such as Sittingbourne Community College, we reseal washrooms and kitchens in schools and businesses as well as homes.
Before you book anyone
- Is the old sealant removed completely?
- Which colour the sealant will be
- Whether the sealant suits the joint
- Who turns up on the day
For landlords and businesses
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Bathroom resealing around Tonge
Tonge is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Rented homes near Teynham station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. If you live in an older home near Church of St Giles, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Tonge is about 2 miles east of Sittingbourne, in Kent. Our applicators cover bathroom resealing for householders, landlords and businesses in Tonge. Our Kent coverage runs to 922 places, Tonge among them. For nearby work, see our Chelmsford page (30 miles or so).
Here we cover the ME9 postcode area for bathroom resealing. If you are just outside Tonge, we cover Tonge Corner (1 mile south), Milton Regis (1 mile west), Murston (1 mile south-west), Radfield (1 mile south) and Kemsley (2 miles west). We also work in nearby towns such as Maidstone (12 miles south-west), Ashford (15 miles south), Canterbury (14 miles east), Whitstable (11 miles east), Faversham (5 miles south-east) and Herne Bay (15 miles east).
What’s near Tonge
Typical jobs here are in homes near Milton Creek Country Park. The nearest railway station is Teynham station, roughly 1.7 miles south-east. A little further out are Dolphin Sailing Barge Museum (1.6 miles west) and Castle Rough (1.3 miles north-west).
What happens on the day
There isn’t much for you to do on the day. Point us to the joints and we’ll get on with it. The job generally takes a morning or an afternoon for most single baths and showers, including the tidy-up. In a small place like Tonge, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We cover the area around the joints we’re working on.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
How to prepare
- Clear items away from the joints we’re working on
- Let us know about parking restrictions
- Let us know if you’ve seen damp or leaks
Getting a quote
For a quote, phone 0345 464 0079 or email us with the location and a short description of the problem. We’ll send you a clear quote before any work starts.
Read more
Towns and villages near Tonge
More services for Tonge
DIY versus a professional finish
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.