Kent · England

Bathroom & kitchen resealing in Minster, Kent

Bath, shower, basin, wet room, worktop and sink resealing for homeowners, landlords and businesses in Minster. Fully insured, ARBOMaster approved and guaranteed for a year.

  • Damp behind the bath or under the tray
  • Water escaping at the shower enclosure
  • Gaps between the worktop and the wall

Bathroom resealing near Minster

For landlords and businesses

Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.

Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.

About our bathroom resealing in Minster

Across Minster, the joints we reseal are the ones that fail in any home: bath edges, tray joints, basin backs and kitchen upstands. Every joint is cut out, cleaned and left dry before it’s resealed. Common call-outs are for water escaping at the shower enclosure and a reseal done over the top of the old bead, across wet rooms, sinks & splashbacks and shower trays & enclosures.

Most bathrooms in a town like Minster are in family homes, used every day, where sealant and grout take a lot of daily wear. The usual signs are mould in the bead, gaps by the sink and grout that is cracked or stained.

All our work comes with our one-year guarantee, wherever you are in Kent.

Fresh white silicone going into the corner where a shower screen meets the tiled wall
Where
Minster (ME12)
Wider area
Kent
Cover
12 months on all our work
Price
A clear price before work begins
Call
0345 464 0079
Page updated
26 October 2026

What happens on the day

All our tools and materials come with us in the van, so there’s nothing for you to buy. Once we have agreed what’s being done, we protect the area and start. Most jobs take two to three hours for a typical bath, depending on how much old sealant there is. For a job in Minster, we need access to where the work is and somewhere nearby to park. If the job is outside, mention gates, side access and anything above ground floor.

  1. First, each joint is checked for movement and signs of water.
  2. Every trace of the old bead is removed, including the thin smear on the tiles.
  3. Joints are degreased and any mould is treated.
  4. With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
  5. We tool the bead to a neat finish and give you the cure time, generally around 24 hours.

How to prepare

  • Try not to wet indoor joints just before the visit
  • Clear items away from the joints we are working on
  • Let us know about earlier repairs to the joints

How to get a quote

For bathroom resealing in Minster, call 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.

Get a quick quote

Related advice

Can I do it myself?

The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.

A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

Honest limits

We’d rather tell you now than do work that will not last, so here’s what sealant can’t put right:

  • Tiles that have come away from the wall
  • Failed grout lines across the wall
  • A bath or tray that moves because it is not properly supported

Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly before booking.

Joints and surfaces we work on

  • Wet rooms
  • Basins & vanity units
  • Sinks & splashbacks
  • Kitchen worktops & upstands
  • Shower trays & enclosures
  • Baths

Aftercare tips

Simple care keeps the joints in good condition. Our advice:

  • Check the joints every few months for splits or lifting
  • Let new sealant cure fully before it gets wet
  • Do not let bottles sit on the bead
  • Don’t leave water standing on kitchen joints

Keep bottles and razors off the sealant line, as they hold water against it. A quick squeegee after showering keeps water from sitting on the joint.

A few black dots in the silicone soon become a black line. Once it’s deep in the silicone, cleaning generally won’t remove it, and nearby grout often goes the same way. Catching it early keeps it a simple reseal.

Bathroom resealing in Minster: local notes

Minster is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.

For site and facilities teams at buildings such as Thistle Hill Academy, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. For an older house near a landmark such as The Abbey Church Of St Mary And St Sexburga, timber floors under older bathrooms flex, so joints need a sealant that moves with them. Rented homes near Queenborough station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.

Minster is about 6 miles north-east of Sittingbourne, in Kent. Anywhere in ME12, our applicators can take on bathroom resealing. Across Kent, we cover 922 places, and Minster is one of them. We also work in Chelmsford, around 26 miles away.

Every address in ME12 is covered for bathroom resealing. That includes homes and businesses on High Street, Lapwing Close and Copland Avenue. Minster sits on or near the A2500 and B2008, so getting to you is simple. Other places close to Minster include Halfway Houses (1 mile west), Sheerness (2 miles north-west), Queenborough (2 miles west), Eastchurch (3 miles east) and Rushenden (3 miles west). Larger places within reach include Canterbury (15 miles south-east), Sittingbourne (6 miles south-west), Whitstable (11 miles south-east), Faversham (8 miles south-east), Herne Bay (15 miles east) and Davington (8 miles south-east).

Local landmarks in Minster

We work in homes and buildings around Barton's Point Coastal Park, Oasis Academy Isle of Sheppey and Leigh Academy Minster, among other places. Minster’s nearest station is Queenborough station, roughly 2.3 miles west. Nearby you’ll also find Minster Gatehouse Museum (within half a mile north-east) and Castle Rough (4.5 miles south-west).

Map of Minster © OpenStreetMap contributors

What the job involves on each surface

Basins & vanity units

On a basin, neatness shows: the bead is right in front of you, so it’s tooled cleanly and evenly, finished in a colour that suits the basin.

Kitchen worktops & upstands

Worktop joints get wet and wiped every day. The new bead is colour-matched where it shows.

Minster questions

Is bathroom resealing in Minster guaranteed?

All our work, in Minster and everywhere else, comes with a 12-month guarantee. We are fully insured, and an ARBOMaster approved applicator.

I let a flat near Queenborough station. Can you help?

Yes. We work for landlords and letting agents as well as householders. You can phone 0345 464 0079 or send us an email with the details for a clear quote.

Can I add another job to the visit?

Yes. More than one area can be quoted together.

Do you hold any approvals?

Yes. We hold ARBOMaster approved applicator status, and we’re fully insured.

How long does a bath or shower reseal take?

One bath or shower is around two hours’ work, old sealant removal included. A full bathroom and kitchen can take most of a day.

Do you do commercial work?

Yes, regularly. We can plan bigger jobs in stages.

Does someone need to be in?

It depends on the job. Inside work needs someone to give us access.

Are you insured?

Yes. Mr Mastic is fully insured.

How we quote for bathroom resealing

Call for a quick quote. What matters most is:

  • How easy the joints are to reach
  • How much old sealant there is and how hard it is to remove
  • Mould in or behind the old joints
  • The product the joint needs

We do not show prices on the website, because each job is priced on what it involves. For a quick quote, please ring 0345 464 0079 or drop us an email and we will talk you through it.

What we need to know

When you call or email, it’s useful to know:

  • Any access issues, like height or stairs
  • Roughly how big the job is
  • Where the job is, and your postcode
  • The type of property

For a quote, ring 0345 464 0079 or email us with the location and a short description of the problem. We’ll give you a clear price before any work starts.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job